IP historical performance monitoring

33

FIGURE 408 Data Collector wizard MIB Index dialog box

You can define index values for each MIB object that requires an index.

17.From the MIB Instances list, select the required MIB variable.

The Complete SNMP OID, the Index Name, and the Index Value display beneath the MIB Instances list.

18.You have several options for entering index information:

Select the Dynamic walk check box to dynamically select index values for a particular index. When enabled, instances are selected based on a MIB walk.

Click the Populate All button to populate the index with all objects. You can then use the Delete Index button to delete any objects you do not need.

If you selected a product collector, the index is populated with indexes of all instances of the selected MIB variable.

If you selected a port collector, the index is populated with the ifIndex value of the port with which the MIB variable is associated.

Click the MIB Walk button to start a MIB walk facility. Refer to “Configuring a MIB walk instance” on page 1005.

Click the Add Index button to add an index.

Click the Delete Index button to delete an index.

Brocade Network Advisor IP User Manual

1003

53-1003056-01

 

Page 1055
Image 1055
Brocade Communications Systems IP250 user manual 1003