Brocade Communications Systems IP250 user manual Editing address ranges, Excluding IP addresses

3 IP discovery profiles

Excluding IP addresses

NOTE

To exclude a VCS fabric, you must add all members of the VCS fabric to the exclude list.

To exclude an IP address range (IPv4 and IPv6), complete the following steps. 1. Select IP Address from the Entry Type list.

FIGURE 26 Exclude Address Range

2.Enter the first IP address in the range in the first IP Address field.

3.Enter the last IP address in the range in the second IP Address field.

4.To include an address range using the Address Range format, refer to “Adding IP addresses” on page 68.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

Editing address ranges

1.Select Discover > IP Products.

The Discover Setup - IP dialog box displays.

2.Click the Profiles tab

3.Select the profile you want to edit in the Discovery Profiles table and click the Address Ranges tab.

4.To edit an included address range, select the address range you want to edit in the Included IP Addresses list.

5.Click the left arrow button to display the address range details in the top Add/Edit IP Addresses area.

6.Edit the included address range by choosing one of the following options:

•To edit the included addresses using the CIDR subnet format, refer to “Editing CIDR subnet addresses” on page 71.

•To edit the included addresses using the subnet format, refer to “Editing subnet addresses” on page 71.

•To edit the included addresses using the address range format, refer to “Editing IP addresses” on page 71.

7.Select the Also perform ping sweep check box to perform ping sweep on the address range.

70	Brocade Network Advisor IP User Manual
	53-1003056-01