Manuals / Brocade Communications Systems / Computer Equipment / Network Hardware

Brocade Communications Systems IP250 user manual FTP/SCP/SFTP server settings, Http

Models: IP250

1 1753

Download 1753 pages 4.1 Kb

Page 224

5 Software Configuration

6.Select one of the following options to determine configuration file transfer communication:

•SCP only

•TFTP only

•SCP then TFTP

•TFTP then SCP

7.Select one of the following options to configure the web element manager communication:

•HTTP

•HTTPS (HTTP over SSL)

•HTTPS then HTTP

8.Click Apply or OK to save your work.

FTP/SCP/SFTP server settings

NOTE

For FIPS-enabled Fabric OS switches, you must configure the FTP/SCP/SFTP server communication to an external SCP server to download firmware and allow technical support.

File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer to another over a TCP computer network. During installation, a built-in FTP server and its services are installed. Other FTP servers on your system are recognized by the application as external FTP servers.

For Windows systems, the built-in FTP server is the default configuration and installation starts the FTP service if port 21 is not used by any other FTP server. For UNIX systems, built-in FTP is the default for UNIX systems during installation; the external FTP server is the default only if port 21 is busy.

Note that when uninstalling the application the built-in FTP server is removed with all other services even if the FTP service is used by firmware upgrade or supportSave features.

NOTE

FTP is supported on all Fabric OS devices.

Secure Copy (SCP) is a means of securely transferring computer files between a local and a remote host or between two remote hosts, using the Secure Shell (SSH) protocol. You must configure SCP on your machine to support Technical Support and firmware download.

NOTE

SCP is supported on Fabric OS devices running 5.3 and later.

SSH File Transfer Protocol (SFTP) is a network protocol used to transfer data from one computer to another over a secure channel. You must configure SCP on your machine to support Technical Support and firmware management.

NOTE

SFTP is supported on Fabric OS devices running 7.0 and later.

The built-in SCP/SFTP servers use the port 22 by default.

172	Brocade Network Advisor IP User Manual
	53-1003056-01

Image 224

Brocade Communications Systems IP250 user manual FTP/SCP/SFTP server settings, Http

Contents

Brocade Network Advisor Brocade Communications Systems, Incorporated Title Publication number Summary of changes DateTitle Publication number Summary of changes Date 53-1003056-01 Contents Installing a patch Uninstalling a patch Chapter DiscoveryVii Configurable preferences Management groups overviewDisplaying Network Object view 111Viewing configured users Users overview181 182Accessing a dashboard Setting the dashboard displayDashboard overview Dashboard toolbar53-1003056-01 IP tab overview IP main toolbarProduct List toolbar Host Product List toolbarViewing Call Home configurations Call Home overviewSystem requirements 344About third-party tools Starting third-party tools from the applicationLaunching a Telnet session Launching an Telnet session from the IP tabWireless management overview Wireless devicesServer Management Console overview Launching the SMC on WindowsVCS mode types Logical chassis cluster mode discoveryVCS Ethernet Fabrics view managementHost management Brocade adaptersHost Bus Adapters Converged Network AdaptersThis chapter 481Adding policies from saved configurations Telemetry overviewPolicy-based routing Viewing existing PBR policiesLayer 2 access control list management IronWare Layer 2 ACL configurationFabric OS Layer 2 ACL configuration Creating a Layer 2 ACL from a saved configurationScheduling a security configuration deployment Zoning overviewOnline zoning Offline zoningChapter Port Fencing 671Chapter IP Element Manager 723743 765CLI configuration overview 777778 807Default Vlan Remote Switched Port AnalyzerConfiguration requirements for Vlan Manager Adding or modifying dual mode portsMpls pre-configuration 843917 VIP Servers overviewVIP Server functions Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management This chapter 1213 Configuring packet captures Chapter Technical SupportReports Dashboard main menus 1261 IP main menus IP shortcut menus Link incident eventsProduct status events 12771371 This appendixDatabase tables and fields Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo How this document is organized About This DocumentThis chapter Xliv 53-1003056-01 Supported hardware and software Fabric OS hardware and software supportIronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Document conventions Text formattingKey terms Bold textAdditional information Brocade resourcesOther industry resources These references are made for informational purposes onlyGetting technical help Document feedbackGetting Started User interface componentsManagement server and client Logging into a server Management server and clientLaunching a remote client Clearing previous versions of the remote clientLaunching the Configuration Wizard 53-1003056-01 53-1003056-01 Active Sessions dialog box displays Figure Viewing active sessionsSelect Server Active Sessions Disconnecting users Viewing server propertiesTo disconnect a user, complete the following steps Select Server Server PropertiesViewing port status Management server and client Server PropertiesClick Close to close the Server Properties dialog box Field/Component DescriptionServer and client ports TCP Tftp UDP4431,2 Https server Json Accessibility features for the Management application Accessibility features for the Management applicationKeyboard shortcuts Menu Item or Function Keyboard ShortcutSetting the look and feel Look and feel customizationSelect Server Options Options dialog box displaysChanging the font size Connecting to the database using pgAdminPostgreSQL database PostgreSQL database Selecting File Add ServerOdbc Data Source Administrator dialog box displays Click the System DSN tab Click AddLinux version RedHat Package Manager file SuseInstalling the Odbc driver on Linux systems On the Setup psqlODBC screen click NextAdding the Datasourse on Linux systems Save and close the odbcinst.ini fileTesting the connection on Linux systems Executing SQL queries from the CLIOn the Select database screen, complete the following steps Select the Connect to an existing database optionOpen Source Software License Type Changing the database user passwordSupported open source software products Lgpl HP Software Development KIT License AgreementIreasoning BSDOpen Source Software License Type Supported open source software products Execute the patch file for your operating system Installing a patchPatches Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview53-1003056-01 Configuration requirements Discovery of IPv6 addressesMIB support Ietf standard MIB name Required MIB object Data collectedBRIDGE-MIB MIB-IIIF-MIB Ietf standard MIB name Required MIB object Data collected IP-MIB VDX/VCS discoveryENTITY-MIB Network OS discovery IP address format VCS in-band management interface discoveryMapping VCS in-band management 1000000533516242Standalone discovery VCS fabric discoveryVCS fabric rediscovery Select File SaveNetwork OS 2.0 device limitations Seed switch failoverVCS fabric split and merge Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change Configuring IP profile discovery Discover Setup IP dialog box displaysHyperEdge stack discovery HyperEdge stack discoveryConfiguring IP profile discovery Click the Global Settings tabConfiguring IP simple discovery Configuring IP simple discoveryIP Snmp credentials Adding SNMPv1 and SNMPv2c credentialsIP Snmp credentials Click the Snmp tabCBC-DES Adding SNMPv3 credentialsHMACMD5 Hmacsha Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Reordering Snmp credentials in the list Deleting Snmp credentials from the listDefault IP user credentials Adding user credentialsDefault IP user credentials 53-1003056-01 Editing login prompt user credentials Editing enable prompt user credentialsEditing enable super user credentials To edit an enable super user, complete the following stepsReordering user credentials in the list Deleting user credentials from the listIP Object identifier filters Including product typesIP Object identifier filters Click the OID Filter tabExcluding product types Product sysObjectID VendorDefining global setting preferences Defining global setting preferencesDeleting product types from the list Click the Preferences tab53-1003056-01 Configuring event-based collection Reduce the managed count by completing the following steps53-1003056-01 IP discovery profiles Configuring a discovery profileIP discovery profiles Duplicating a discovery profile Configuring address ranges Adding Cidr subnet addresses Select Cidr Subnet from the Entry Type listAdding subnet addresses Adding IP addressesExcluding Cidr subnet addresses Excluding subnet addressesEditing address ranges Excluding IP addressesEditing IP addresses Editing Cidr subnet addressesEditing subnet addresses Scheduling discovery Configuring a one-time discovery schedule Configuring an hourly discovery scheduleConfiguring a daily discovery schedule Configuring a weekly discovery scheduleConfiguring a monthly discovery schedule Configuring a yearly discovery scheduleTo edit a discovery schedule, complete the following steps Suspending a discovery scheduleEditing a discovery schedule Editing a one-time discovery schedule Editing an hourly discovery scheduleEditing a daily discovery schedule Editing a weekly discovery scheduleEditing a yearly discovery schedule Configuring advanced discovery profile preferencesEditing a monthly discovery schedule IP discovery profiles Starting discovery manually Deleting a discovery profileCreating a discovery address file Starting discovery automatically Stopping discoveryViewing discovery status To view discovery status, complete the following stepsViewing discovery reports Mailing discovery reportsClick Discovery Log Exporting discovery reportsViewing the discovery log Individual IP device discovery Individual IP device discoveryAdding an IP device to discovery HMACMD5 Click the SNMPv3 Read Only tab Click the SNMPv1/v2c Read/Write tabClick the Read/Write Credentials tab Editing IP device discoveryClick the SNMPv1/v2c Read Only tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Host discovery Deleting IP devices from discoveryDiscovering Hosts by Network address or host name Select Discover Host AdaptersHost discovery Importing Hosts from a CSV file Click Close on the Discover Host Adapters dialog boxHost discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery Editing Host adapter credentials To edit Host credentials, complete the following stepsRemoving a host from active discovery Rediscovering a previously discovered fabricDeleting a host adapter from discovery Click DiscoverIconDescription Troubleshooting host discoveryViewing the host discovery state VM Manager discovery VM Manager discovery requirementsDiscovering a VM manager Select Discover VM ManagersClear to disable vSphere client plug-in registration VM Manager discoveryTo edit VM manager discovery, complete the following steps Editing a VM managerClick Close on the Discover VM Managers dialog box Excluding a host from VM manager discovery Including a host in VM manager discoveryRemoving a VM manager from active discovery Rediscovering a previously discovered VM managerDeleting a VM manager from discovery Viewing the VM manager discovery stateRediscovering IP devices Troubleshooting VM manager discoveryIP Rediscovery Rediscovering IP devices from the Product List Click RediscoverEnabling password validation on rediscovery Rediscovering a groupDisplaying Network Object view Management GroupsManagement groups overview Product group overview Static product groups Creating a static product groupEditing a static product group Product group overviewDuplicating a static product group Dynamic product groups Creating a dynamic product groupUserdefinedproperty1 up to Select Value or Regular Expression from the Type list Editing a dynamic product group Duplicating a dynamic product groupProduct Group Properties dialog box displays Viewing product group propertiesViewing test results Click OK to close the dialog box Properties tabProducts tab Performance listPort Groups Deleting a product groupCreating a port group Port GroupsEditing a port group Duplicating a port group Viewing port group properties Ports tabDeleting a port group Application Configuration Configurable preferencesServer Data backup What is backed up? Management server backupConfiguring backup Select Server Backup in the Category list130 53-1003056-01 Enabling backup Disabling backup Viewing the backup statusChanging the backup interval Clear the Enable Backup check box Click Apply or OKSelect Server Backup in the Category list Click Backup Now Starting immediate backupReviewing backup events Server Data restore Restoring dataSAN data collection Restoring data to a new server136 53-1003056-01 Snmp Product communication protocolsIcmp Netconf FTPEvent storage settings Configuring event storageEvent storage settings Product communication protocols To configure event storage, complete the following stepsFlyover settings Configuring flyoversStoring historical events purged from repository Select Event Storage in the Category listProperties table Options dialog box Flyovers pane, Connection tabViewing flyovers Name settingsTurning flyovers on or off Click Fix Duplicates Select Configure NamesFixing duplicate names Viewing names Name settings Select one of the following optionsConfigure Names dialog box displays Figure Adding a name to an existing device Click Apply Names Adding a name to a new deviceApplying a name to a detached WWN Removing a name from a device Editing namesExporting names Click ExportImporting Names Searching for a device by nameTo import names, complete the following steps Click ImportMiscellaneous security settings Searching for a device by WWNSelect Security Misc in the Category list Configuring the server nameConfiguring login security Syslog Registration settings Configuring the login banner displayDisabling the login banner Registering a server as a Syslog recipient automaticallyRegistering a server as a Snmp trap recipient automatically Snmp Trap Registration settingsConfiguring the Syslog listing port number Snmp Trap forwarding credential settings Configuring the Snmp trap listing port numberConfiguring Snmp v1 and v2c credentials Snmp Trap forwarding credential settingsConfiguring Snmp v3 credentials Client/Server IP Software ConfigurationConfiguring the server IP address 156 53-1003056-01 Configuring an explicit server IP address Configuring the application to use dual network cards Click OK on the Login BannerIP preferences Software ConfigurationYou can configure the following preferences for IP products Configuring change manager preferences Configuring deployment report preferences Configuring custom report preferencesConfiguring deployment preferences Configuring IP device manager preferences Configuring image repository preferencesConfiguring Mpls management preferences Configuring Mpls polling service preferencesConfiguring name service preferences Configuring polling service preferencesConfiguring sFlow accounting preferences Configuring sFlow data collector preferencesConfiguring sFlow monitoring preferences Configuring SSL certificates preferencesConfiguring Tftp preferences Configuring Snmp preferencesConfiguring syslog file reader preferences Memory allocation settings Configuring memory allocation settingsServer Heap Size Configuring asset polling Viewing the network size status Product communication settingsConfiguring SAN communication Select the Connect using Https Http over SSL only option Configuring the preferred IP formatSelect the Connect using Http option Configuring IP communication FTP/SCP/SFTP server settings HttpAccessing the FTP server folder Configuring an internal FTP serverConfiguring an internal SCP or Sftp server Configuring an external FTP, SCP, or Sftp server Select the Use External FTP Server and/or SCP Server optionTesting the FTP, SCP, and Sftp server Select SCP from the Preferred Protocol Secured listSelect Sftp from the Preferred Protocol Secured list Select FTP/SCP/SFTP in the Category listTo configure server settings, complete the following steps Server port settingsConfiguring the server port Support mode settings Configuring support mode settingsSelect Support Mode in the Category list Options dialog box displays FigureConfiguring the server log file purge limit Fips Support User Account Management Users overviewViewing configured users To view configured users, complete the following stepsSelect Server Users Users dialog box displays Click the Users tab, if necessary183 184 53-1003056-01 User accounts Creating a new user accountUser accounts To create a new user account, complete the following steps186 53-1003056-01 Editing a user account Copying a user accountCopying and pasting user preferences Disabling a user account Enabling a user account Deleting a user accountUnlocking a user account To re-activate a user account, complete the following stepsRoles Creating a new roleRoles To create a new role, complete the following stepsEditing a role Copying a roleTo delete a role, complete the following steps Deleting a roleAdding privileges to a role Areas of responsibility Areas of responsibilityRemoving privileges from a role Creating an AOR Editing an AOR Copying an AORDeleting an AOR Assigning products to an AORPassword policies Configuring a password policyRemoving products from an AOR Users dialog box displays Click the Policy tab199 Viewing password policy violators Authentication Server Groups on the Management server Click the Authentication Server Groups tabAssigning roles and AORs to an AD group Click View Policy ViolatorsTo load an AD group, complete the following steps Removing roles and AORs from an AD groupLoading an AD group Deleting an AD group Creating an AD user accountOpen the Active Directory Users and Computers console Close the Active Directory Users and Computers dialog boxDefining user accounts on the external Ldap server Configuring roles and AORs on the external Ldap serverAssigning an AD user to an AD group Select Start Run Type adsiedit.msc and press Enter User profilesClick OK Close the Management console User profiles Configure CLI credentials Viewing your user profileSelect Server User Profile Click OK on the User Profile dialog boxChanging your password Editing your user profileUser profiles To edit your user profile, complete the following stepsViewing your password policy To view your password policy, complete the following stepsResetting optional messages Configuring e-mail notificationConfiguring CLI credentials Click Optional Messages ResetConfiguring the CLI credential policy Dashboard Management Dashboard overview212 53-1003056-01 Dashboard toolbar ToolbarDashboard messages Dashboards expand navigation barAccessing a dashboard General dashboard functionsFiltering the dashboards list Creating a user-defined dashboardCustomizing the dashboard widgets and monitors Setting the dashboard displayDeleting a user-defined dashboard 218 53-1003056-01 Attaching and detaching the Dashboard tab Exporting the dashboard displayPrinting the dashboard display Setting the network scope Creating a customized network scope Deleting a user-defined network scope Setting the data display time frameEditing a user-defined network scope IP Port Health Default dashboardsProduct Status and Traffic dashboard Status widgets Access Point Status widgetStatus widgets Customizing the Access Point Status widget Color TypeEvents widget ColorSeverityAccessing additional data from the Events widget Customizing the Events widgetHost Adapter Inventory widget Customizing the Host Adapter Inventory widgetIP Inventory widget Accessing additional data from the IP Inventory widget Customizing the IP Inventory widgetIP Status widget displays the device status as a pie chart IP Status widgetAccessing additional data from the IP Status widget Viewing additional IP product dataFabric Watch widgets Fabric Watch widgetsStatus widget Out of Range Violations widget Port Health Violations widget Customizing the Out of Range Violations widgetCustomizing the Port Health Violations widget Monitor title Description Data collectors Accessing additional data from the widgetPerformance monitors Click the Customize Dashboard icon Performance monitors Preconfigure performance monitorsDisplaying monitors on the Performance Dashboard Performance monitors Click OK Top Port Alignment Errors monitorAccessing additional data from top or bottom port monitors Top Port C3 Discards monitor Performance monitorsTop Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Top Port Encode Error Out monitor Accessing additional data from the Top Port Discards monitorTop Port Errors monitor Top Port Errors monitorAccessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Runtime Errors monitor Top Port Receive EOF monitorTop Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Top Port Underflow Errors monitor Accessing additional data from the Top Port Traffic monitorTop Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor Measures User-defined performance monitorsMonitor types Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors User-defined performance monitors Port measures typesAccessing additional data from the Distribution monitors Time series performance monitorsConfiguring a user-defined product performance monitor Accessing additional data from the sFlow monitorsTop sFlows performance monitors Add Performance Dashboard Monitor dialog box displays271 Adding targets to a user-defined performance monitor Click OK on the Add Performance Dashboard Monitor dialog boxConfiguring a user-defined port performance monitor Performance Dashboard Monitor Targets dialog box displays274 53-1003056-01 Configuring a user-defined sFlow performance monitor MAC VlanViewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph View Management Utilization LegendIP tab overview IP main toolbar Main toolbarProduct List toolbar Host Product List toolbar Topology Map toolbarHost topology map toolbar IP Product ListTopology Map Product List functions286 53-1003056-01 Keyboard Shortcut Description Master LogIP tab overview Topology keyboard shortcuts Minimap Anchoring or floating the MinimapStatus bar Resizing the MinimapIcon legend IP product iconsHost product icons Icon legendVlan CNAIP group icons IP port iconsIP product status icons Event iconsCustomizing the main window Zooming in and out of the Connectivity MapZooming Customizing the main windowExporting the topology Customizing application tablesZooming out Displaying columnsChanging the order of columns Resizing the columns Sorting table informationCopying table information Exporting table informationProduct List customization Adding a property labelSearching for information in a table Expanding and collapsing tablesEditing a property label Deleting a property labelSearch Searching for a deviceRestricting a search by node Address Finder Searching for an exact matchClearing search results Address FinderAddress Finder dialog box displays Finding IP addressesSelect Tools Address Finder 303 Finding MAC addresses 305 IP topology view manager Network Objects view Network Object view functionsNetwork Objects view Filtering devices in the Network Objects Product ListClearing the Network Objects Product List filter IP Topology view IP Topology viewL2 Topology view Ethernet Fabrics view Vlan Topology viewSTP/RSTP topology Ethernet Fabrics viewViewing STP/RSTP topology ElementDescriptionGenerating an STP/RSTP Report Exporting an STP/RSTP ReportVlan Topology view STP/RSTP Topology map elements Element DescriptionHost Topology view Click Save Host Topology viewMailing an STP/RSTP Report 314 53-1003056-01 IP topology map components IP topology map componentsTopology map elements Connections Icon Description ProductsLogical Viewing flyovers on the topology map Topology map layoutOrganic OrthogonalOrthogonal Merge Lines HierarchicalFree Form Selecting a topology map layoutCircular Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Deleting a background image from the library Click OK on the Topology Background Map dialog boxPrinting a map Select Portrait or Landscape from the Orientation areaPort actions Enabling port actionsPort actions Disabling port actionsDisplaying port properties for an attached device Accessing performance monitoring 330 53-1003056-01 MRP Topology MRP Topology overviewViewing a MRP Topology map Viewing a MRP ring MasterError Viewing a MRP ring MRP Topology map elementsConfiguring the application to show a dashed line Selecting a topology map layout336 53-1003056-01 337 Creating a customized layout Enter the ring ID, for example, Ring Customizing the MRP Topology mapClick the Starting Point row Click Close on the MRP Topology Options dialog box Refreshing MRP Topology dataViewing MRP properties 341 Viewing MRP properties Call Home Call Home Viewing Call Home configurations System requirements346 347 Showing a Call Home center Hiding a Call Home centerShowing a Call Home center To show a Call Home center, complete the following stepsClick Edit Centers beneath the Call Home Centers list Editing a Call Home centerEditing the IBM Call Home center Backup Connection field Editing an e-mail Call Home centerPrimary Connection field Click Edit Centers beneath the Call Home Centers tableEnter a user name in the Smtp Server Settings Username field Enter a password in the Smtp Server Settings Password fieldCall Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center Enabling supportSave To enable a Call Home center, complete the following stepsEnabling a Call Home center Testing the Call Home center connection Testing the Call Home center connectionDisabling a Call Home center Select Monitor Event Notification Call HomeViewing Call Home status Viewing Call Home statusAssigning a device to the Call Home center Removing a device from a Call Home centerRemoving all devices and filters from a Call Home center Assigning a device to the Call Home centerClick OK on the Call Home Event Filter dialog box Defining an event filterTo define an event filter, complete the following steps Assigning an event filter to a Call Home center Assigning an event filter to a Call Home centerAssigning an event filter to a device Overwriting an assigned event filter Overwriting an assigned event filterRemoving all event filter from a Call Home center Removing an event filter from a device Removing an event filter from a deviceSearching for an assigned event filter Searching for an assigned event filter Starting third-party tools from the application Third-party toolsAbout third-party tools Launching a Telnet session Launching an Element ManagerLaunching an Telnet session from the IP tab Select Tools Product Menu ToolNameSelect Configure Element Manager HCM. HCM Agent displays Select Tools SetupLaunching HCM Agent Adding a toolEntering the server IP address of a tool Adding an option to the Tools menu Changing an option on the Tools menu Removing an option from the Tools menuAdding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Launching the SMC on Windows Server Management ConsoleServer Management Console overview Services tab Monitoring and managing Management application servicesServices tab Launching the SMC on LinuxStopping all services Stopping the Cimom servicesRefreshing the server status Click Stop CimomStarting all services Restarting all servicesChanging the database password Click Change Database PasswordPorts tab Viewing server port numbersAAA Settings tab Configuring Radius server authenticationAAA Settings tab Select Radius Server from the Primary Authentication listConfiguring a Radius server Local DatabaseConfiguring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server Configuring TACACS+ server authentication For Primary Authentication, select TACACS+ ServerConfiguring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list Configuring switch authentication For Primary Authentication, select SwitchConfiguring Windows authentication For Primary Authentication, select Windows DomainConfiguring local database authentication Displaying the client authentication audit trailFor Primary Authentication, select Local Database Authentication Audit Trail log displaysRestore tab Technical Support Information tabRestoring the database Capturing technical support informationUpgrading HCM on the Management server HCM Upgrade tabTo upgrade HCM, complete the following steps SMI Agent Configuration Tool SMI Agent Configuration Tool Select the HCM Upgrade tabManagement Console dialog box Launching the Smia configuration tool on WindowsSMI Agent Configuration Tool Launching the Smia configuration tool on Unix Smia Configuration Tool dialog boxSmia Configuration Tool dialog box displays Launching a remote Smia configuration toolService Location Protocol SLP support Slptool commands SLP on Unix systems SLP file locations on Unix systemsSLP on Windows systems SLP file locations on Windows systemsAuthentication tab Home tabClick the Authentication tab Authentication tabConfiguring Cimom server authentication Configuring the SMI Agent port number Cimom tabConfiguring the Cimom Bind Network Address Configuring the Cimom log Click the Certificate Management tab Certificate Management tabTo import a certificate, complete the following steps Viewing a certificate Exporting a certificateSummary tab Deleting a certificateSMI Agent Configuration Tool Click the Summary tab Licensed Ports Log LevelManaged Ports 412 53-1003056-01 Wireless Management Wireless management overviewDevice Name Firmware required Wireless devicesWireless device discovery Wireless devices on the dashboard Wireless devices on the dashboardWireless device properties View managementElement Manager View managementBrowser and system requirements Launching the Element ManagerConfiguration repository and backup management Launching a Telnet sessionCLI configuration management Save and close the fileCluster mode Vlan managementPolicy Monitors Fault managementPerformance management AP Products report Status Firmware versionLocation Contact424 53-1003056-01 VCS Management VCSVCS mode types Fabric cluster modeLogical chassis cluster mode discovery Logical chassis cluster operationsEthernet Fabrics view management This section contains these topics428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Support for Network OS VDX 2740 embedded switch Network OSVCS product groups Port profilesStatic product group Dynamic product groupPort profile Vlan profile QoS profile Ampp characteristicsLife of a port profile Ampp events and behavior Ampp event Applicable behavior and failuresPort profile configuration using the management application Assigning MAC addresses to a port profileManaging offline MAC addresses Related topicsClick Add Assign MACs dialog box displays Click Add Offline MACsComparing port profiles Profile Comparison Summary dialog box Profile Properties Vlan SettingsProfile Comparison Summary list QoS Settings ACL SettingsFCoE Settings Deploying port profilesSystem Monitor support on Network OS VDX platforms FRU monitoringResource monitoring System thresholdsAlert notifications SFP parameter monitoring Security monitoringPort statistics monitoring SFP parameter Description Suggested SFP impactInterface error types Select Monitor Diagnostics Traceroute Ethernet fabric tracerouteTracing Ethernet fabric routes To diagnose traceroute, you can do either of the followingSource address format Condition TCP UDP Ethernet fabric traceroute Trace Route example Request Source port number Destination port numberExporting diagnostic data Browse to the directory where you want to save the data450 53-1003056-01 Host Management Host managementBrocade adapters Host Bus AdaptersFollowing sections describe the three Brocade adapter types Model number DescriptionConverged Network Adapters Fabric AdaptersHCM software HCM softwareAnyIOTM technology HCM features Host adapter discovery VM ManagerAdding a VM Manager Click Add on the Discover VM Managers dialog boxESXi CIM listener ports HCM and Management application support on ESXi systemsDeleting a VM Manager Adding host adapter credentials for ESXi Add Host Adapters dialog boxSelect Host Adapter Software from the Configure menu Adapter softwareAdapter software Select CIM server ESXi only as the Contact optionDriver repository Importing a driver into the repositoryBoot image repository Deleting a driver file from the repositoryImporting a boot image into the repository Boot Image Management dialog boxDownloading a boot image to a selected host Click Import on the Boot Image Repository dialog boxBulk port configuration Configuring host adapter portsDeleting a boot image from the repository Backing up boot image filesAdding a port configuration Bulk port configurationClick Add on the Configure Host Adapter Ports dialog box Add Port Configuration dialog box, shown in , displays466 53-1003056-01 Adapter Port Configuration Status dialog box displays Configuring FAWWNs on switch ports Editing a port configurationDuplicating a port configuration Deleting a port configurationEnabling the Fawwn feature on a switch or AG ports Disabling the Fawwn feature on a switch or AG portsSelect Configure Fabric Assigned WWN. or Click Start to save the changes to the switchModifying a Fawwn on a switch or AG port Auto-assigning a Fawwn to a switch or AG portManually assigning a Fawwn to a switch or AG port Deleting a Fawwn from a switch or AG port FAWWNs on attached AG portsMoving an AG port Fawwn across switches Adding AG port FAWWNsDeleting AG port FAWWNs Click the Attached AG Ports tabRole-based access control Host adapter administrator privilegesRole-based access control Host adapter management privilegesHost performance management FC port measures HBA port measures CNA port measuresHost security authentication Host security authentication CountersHost security authentication Adapter events Host fault managementSupportSave on adapters Syslog forwarding Host fault managementFiltering event notifications Select the Include FTP Root directory check box Backup supportConfiguring backup to a hard drive Select the Enable Backup check box Click Apply or OK Fibre Channel over Ethernet FCoE overviewEnhanced Ethernet features Enhanced Ethernet featuresDcbx protocol Enhanced Transmission SelectionFCoE protocols supported Ethernet jumbo framesEthernet link layer protocols supported FCoE protocolsFCoE licensing Saving running configurationsCopying switch configurations to selected switches Saving running configurations DCB configuration management Device type Configuration possibilitiesSwitch policies Switch policiesDCB map and Traffic Class map Lldp profilesDCB configuration DCB configurationMinimum DCB configuration for FCoE traffic Select Configure DCB Creating a DCB map to carry the LAN and SAN trafficConfiguring Lldp To configure LLDP, complete the following stepsTo configure the DCB interface, complete the following steps Creating the FCoE Vlan to carry FCoE traffic Select Assign the Global ConfigurationSelect Configure Element Manager Admin Apply the Vlan classifier group to the DCB interface Save the running-config file to the startup-config fileAdding a LAG Add LAG or Edit LAG dialog box displays, as shown in Figure L2 Mode Select Access or TrunkClick Add LAG or Edit LAG Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG QoS configuration Deleting a LAGStrict priority No bandwidth % configuration Allowed Creating a DCB mapOff Priority group ID503 Editing a DCB map Deleting a DCB mapQoS configuration Assigning a DCB map to a port or link aggregation groupSelect Traffic Class from the Map Type list Creating a Traffic Class mapEditing a Traffic Class map Deleting a Traffic Class map Changing the Vlan ID on the default FCoE map FCoE provisioningFCoE provisioning Select Traffic Class in the Map Type listEnabling or disabling the FCoE map on the port Vlan classifier configuration Adding a Vlan classifier ruleVlan classifier configuration Editing a Vlan classifier rule Deleting a Vlan classifier ruleCreating a Vlan classifier group Deleting a Vlan classifier groupLLDP-DCBX configuration LLDP-DCBX configurationConfiguring Lldp for FCoE 515 Editing an Lldp profile Deleting an Lldp profileAssigning an Lldp profile to a port or ports in a LAG 802.1x authentication802.1x authentication Enabling 802.1x authentication Disabling 802.1x authenticationSetting 802.1x parameters for a port 16 802.1x authentication519 Switch, port, and LAG deployment Switch, port, and LAG deploymentDeploying DCB product, port, and LAG configurations Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Supported VCS platforms Viewing switches in VCS modeNetwork OS switches in VCS mode Viewing QoS parameters on the Network OS switch Viewing FCoE parameters on the Network OS switchViewing LLDP-DCBX parameters on the Network OS switch Available RulesVlan Classifiers Lldp Profiles listViewing port parameters on the Network OS switch port Viewing ports in VCS modeViewing the 802.1x parameter on the Network OS switch QoS-DCB Viewing QoS parameters on the Network OS switch portQoS DCB parameters on the Network OS switch port QoS Non-DCB Viewing FCoE parameters on the Network OS switch portQoS non-DCB parameters on the Network OS switch port Viewing LLDP-DCBX parameters on the Network OS switch port Viewing the 802.1x parameter on the Network OS switch portViewing LAGs in VCS mode Viewing LAG parameters on the Network OS switch LAGRe-authentication Interval sec Port ControlViewing QoS parameters on the Network OS switch LAG QoS DCB parameters on the Network OS switch LAGType Minimum LinksViewing FCoE parameters on the Network OS switch LAG QoS non-DCB parameters on the Network OS switch LAGViewing LLDP-DCBX parameters on the Network OS switch LAG Enable LLDP-DCBX check boxDCB performance Real-time performance graphGenerating a real-time performance graph from the SAN tab DCB performanceGenerating a historical performance graph Historical performance graphGenerating a real-time performance graph from the IP tab FCoE login groups Historical performance reportGenerating a historical performance report Historical Performance Graph dialog box displays539 Adding an FCoE login group FCoE login groupsFCoE Login Group Confirmation and Status dialog displays Editing an FCoE login groupFCoE login groups Click OK Select a group from the Login Groups list and click Delete Deleting one or more FCoE login groupsDisabling the FCoE login management feature on a switch Virtual FCoE port configuration Enabling the FCoE login management feature on a switchVirtual FCoE port configuration Viewing virtual FCoE portsVirtual FCoE Ports tab displays, as shown in Figure Clearing a stale entrySelect the Virtual FCoE Ports tab 545 546 53-1003056-01 Policy-based routing TelemetryTelemetry overview Viewing existing PBR policies 549 Adding a new policy Adding rules to a policy551 Editing a rule Adding policies from saved configurationsEditing a policy Deleting a policy or rule Deploying a PBR policy on demandSelect Save deployment only Saving a PBR policy deploymentClick OK on the Deploy to Products PBR dialog box Scheduling a PBR policy deployment Configuring a one-time deployment schedule Configuring an hourly deployment scheduleConfiguring a monthly deployment schedule Configuring a daily deployment scheduleConfiguring a weekly deployment schedule Resetting ACL counters Configure Security ACL AccountingACL Accounting Enabling or disabling ACL accountingViewing ACL counters Select the Clear all counters on device check boxPort Selection Layer 2/3 ACL dialog box displays Click OK on the Port Selection Layer 2/3 ACL dialog box560 53-1003056-01 Security overview Layer 2 access control list managementSecurity Management Add Layer 2 ACL Configuration dialog box displays IronWare Layer 2 ACL configurationCreating a Layer 2 ACL configuration IronWare MAC Editing a Layer 2 ACL configuration IronWare Click OK on the Add Layer 2 ACL Configuration dialog boxCopying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Clearing Layer 2 ACL assignments IronWare Select the Clear ACL Assignment optionDeviceName Layer 2 ACL Configuration dialog box displays Fabric OS Layer 2 ACL configurationCreating a standard Layer 2 ACL configuration Fabric OS Click OK on the Edit Layer 2 ACL Configuration dialog box Editing a standard Layer 2 ACL configuration Fabric OSCopying a standard Layer 2 ACL configuration Fabric OS Creating an extended Layer 2 ACL configuration Fabric OS Select Extended from the Type list572 53-1003056-01 Editing an extended Layer 2 ACL configuration Fabric OS Copying an extended Layer 2 ACL configuration Fabric OS574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Deleting a Layer 2 ACL configuration from the switch Creating a Layer 2 ACL from a saved configurationDeleting a Layer 2 ACL configuration from the application Network OS Layer 2 ACL configuration Viewing Layer 2 ACL configuration on a fabric Network OSViewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Layer 3 access control list policy Click OK on the Port Selection Layer 2 ACL dialog boxCreating a standard L3 ACL configuration Layer 3 access control list policy Add L3 ACL Configuration dialog box displaysCreating a L3 ACL from a saved configuration Click OK on the Add L3 ACL Configuration dialog boxClick OK on the Edit L3 ACL Configuration dialog box Editing a standard L3 ACL configurationEdit L3 ACL Configuration dialog box displays Copying a standard L3 ACL configuration Creating an extended L3 ACL configurationClick OK on the Duplicate L3 ACL Configuration dialog box Click Duplicate586 53-1003056-01 Editing an extended L3 ACL configuration L3 ACL Advanced Settings dialog box displaysCopying an extended L3 ACL configuration 589 Creating an IPv6 L3 ACL configuration Add L3 ACL IPv6 Configuration dialog box displaysClick OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Click OK on the DeviceName L3 ACL Configuration dialog box Deleting a L3 ACL configurationAssigning a L3 ACL configuration to an interface 595 Clearing L3 ACL assignments Configuring the ACL configuration type and operations Configuring hit statisticsConfiguring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded To view all existing networks, complete the following steps Network configurationViewing existing networks Layer 3 access control list policy Click the Networks tab Creating a networkEditing a network Copying a network Deleting a networkNetwork group configuration Viewing existing network groupsCreating a network group Review the List of Network Groups tableTo create a network group, complete the following steps Click the Network Groups tabEditing a network group To edit a network group, complete the following stepsCopying a network group To copy a network group, complete the following stepsClick OK on the Duplicate Network Group dialog box To delete a network group, complete the following steps Service configurationDeleting a network group Viewing existing services Creating a service TCP UDPEditing a service Copying a serviceDeleting a service Service group configuration Viewing existing service groupsClick the Service Groups tab Review the List of Service Groups tableClick Add Add Service Group dialog box displays Creating a service groupTo create a service group, complete the following steps Editing a service group To edit a service, complete the following stepsClick OK on the Duplicate Service Group dialog box Copying a service groupTo copy a service, complete the following steps Media Access Control MAC filter management Media Access Control MAC filter managementDeleting a service group Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Click OK on the MAC Filter Saved Configurations dialog box Editing a MAC filterCopying a MAC filter 626 53-1003056-01 Deleting a MAC filter Assigning MAC filtersAdding a MAC filter configuration to an interface Clearing MAC filter assignmentsSecurity configuration deployment Security configuration deploymentDeploying a security configuration on demand Saving a security configuration deployment Click OK on the Deploy to Products Layer 2 ACL dialog boxScheduling a security configuration deployment Deploy to Product/Ports dialog boxEdit Layer 2 ACL Configuration dialog box displays Select an ACL in the list and click Edit634 53-1003056-01 635 636 53-1003056-01 Zoning Zoning overviewOnline zoning Green ZoneOffline zoning Zoning naming conventionsZoning configuration Configuring zoningZone database size Zone database sizeClick New Zone Creating a zoneViewing zone properties Adding members to a zone Zoning configurationSelect Save to Switch from the Zone DB Operation list Click New Member Creating a member in a zoneRemoving a member from a zone Renaming a zone Deleting a zone Duplicating a zoneEnabling or disabling the default zone for fabrics Select Configure Zoning FabricCustomizing the zone member display Click Zoning PoliciesClick New Alias Creating a zone aliasEditing a zone alias Removing an object from a zone alias Exporting zone aliases Renaming a zone aliasDeleting a zone alias Click Export AliasDuplicating a zone alias Creating a zone configurationClick New Configuration Viewing zone configuration properties Adding zones to a zone configurationRemoving a zone from a zone configuration Zone Configuration Properties dialog box displaysActivating a zone configuration Click ActivateClick Deactivate Deactivating a zone configurationClick the Active Zone Configuration tab Renaming a zone configuration Deleting a zone configurationDuplicating a zone configuration Creating an offline zone databaseDeleting an offline zone database Select Delete from the Zone DB Operation listSelect Refresh from the Zone DB Operation list Refreshing a zone databaseMerging fabrics Merging two zone databases Select Compare from the Zone DB Operation listCreating a common active zone configuration in two fabrics Saving a zone database to a switch Exporting an offline zone databaseYou cannot export an online zone database Select an offline zone database from the Zone DB listRolling back changes to the offline zone database Zoning administrationImporting an offline zone database Comparing zone databases To compare two zone databases, complete the following stepsManaging zone configuration comparison alerts Setting change limits on zoning activation Clearing the fabric zone databaseRemoving all user names from a zone database Finding a member in one or more zonesSelect Clear All from the Zone DB Operation list Select Undo CheckOut from the Zone DB Operation listFinding a zone member in the potential member list Finding zones in a zone configurationFinding a zone configuration member in the zones list Listing zone members Listing un-zoned membersClick OK on the Offline Device Management dialog box Removing an offline deviceReplacing zone members Replacing an offline device by WWN Replacing an offline device by name670 53-1003056-01 Port Fencing About port fencingViewing port fencing configurations About port fencing673 Thresholds C3 Discard Frames threshold Link Reset threshold Protocol error thresholdInvalid CRCs threshold Invalid words thresholdAdding thresholds State Change thresholdAdding a C3 Discard Frames threshold Adding thresholdsPort Fencing dialog box Add C3 Discard Frames Threshold dialog box displaysAdding an Invalid CRCs threshold Add Invalid CRCs Threshold dialog box displaysAdding an Invalid Words threshold Add Invalid Words Threshold dialog box displaysAdding a Link Reset threshold Add Link Reset Threshold dialog box displays Add Protocol Error Threshold dialog box displays Adding a Protocol Error thresholdSelect Protocol Error from the Violation Type list Adding a State Change threshold Add State Change Threshold dialog box displaysAssigning thresholds Unblocking a port Avoiding port fencing inheritanceClick OK on the Edit C3 Discard Frames Threshold dialog box Editing thresholdsEditing a C3 Discard Frames threshold Editing an Invalid CRCs threshold Editing an Invalid Words thresholdEditing thresholds Click OK on the Edit Invalid CRCs Threshold dialog boxEditing a Link Reset threshold Editing a Protocol Error thresholdClick OK on the Edit Link Reset Threshold dialog box Click OK on the Edit Invalid Words Threshold dialog boxClick OK on the Edit Protocol Error Threshold dialog box Editing a State Change thresholdViewing all thresholds on a specific Fabric OS device Finding assigned thresholdsViewing thresholds Removing thresholds Removing thresholds from individual objectsRemoving thresholds from the thresholds table Removing thresholds Ficon configurations Ficon EnvironmentsConfiguring a switch for Ficon operation Configuring a switch for Ficon operationPlanning the configuration 697 Configuring the switch Select Discover FabricsClick Add License Click Download 701 Configuring Ficon display Configuring an Allow/Prohibit Matrix703 Configuring an Allow/Prohibit Matrix manually Click Analyze Zone ConflictsClick Manual Allow/Prohibit Manual Allow/Prohibit dialog box displays, as shown in onClick OK on the Manual Allow/Prohibit dialog box Copying an Allow/Prohibit Matrix configuration Save As/Duplicate dialog box displays, as shown in on707 Activating an Allow/Prohibit Matrix configuration Deleting an Allow/Prohibit Matrix configurationActivating an Allow/Prohibit Matrix configuration Confirmation message displays, as shown in onChanging the Allow/Prohibit Matrix display Cascaded Ficon fabricChanging window arrangement Clearing port namesConfiguring a cascaded Ficon fabric Cascaded Ficon fabric Cascaded Ficon fabric merge Enabling DLS713 Merging two cascaded Ficon fabrics Set up merge options screen displays Specify the Cable length between switch ports Range is form 10 through 500 km. The default is 50 kmResolving merge conflicts TOV717 Select Configure Port Groups Viewing port groupsPort Groups dialog box displays, as shown in on To view port groups, complete the following stepsTo edit a port group, complete the following steps Swapping blades Swapping blades Click OK721 722 53-1003056-01 Element Manager CLI IP Element ManagerElement Manager overview Accessing the IP Element Manager CLI Element Manager CLIAccessing the Element Manager interface Select Configure Element Manager GUIElement Manager interface overview Element Manager interface overviewSwitch properties Serial #Port Count Build Label727 Element Manager toolbar Properties dialog box Ports tabDisplaying port properties Tx Power Rx PowerTemperature Tx Bias Current Port ModeYou can compare physical and virtual port properties Comparing physical port propertiesComparing physical and virtual port properties Comparing physical and virtual port properties Table capabilities Status indicator iconsSearch Performance data Real-time performance monitoringHistorical performance monitoring Real Time Graph/Table Historical Graph/TableResetting port counters Configure dialog boxConfiguring Vlan Changing the standby Management Module to active Management Module switchoverEnable or Disable Switch Fabric Module MR Switch Over Status dialog boxPort mirroring Configuring port mirroringPort mirroring Editing a port in port mirroring Select Configure Port MirroringAdding a port to port mirroring Deleting a port from port mirroring Configuring sFlow in Element ManagerSFlow Accessing the Web Management interface Select Configure Element Manager WebWeb Management interface Web Management interfaceWeb Management interface troubleshooting Accessing the IP device front panelSelect Configure Element Manager Front Panel Element Manager Front PanelConfiguration Repository and Backup Configuration repositoryConfiguration repository 745 Saving the configuration status 747 Viewing the configuration Comparing product configurations749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Change tracking Configuration deviationViewing configuration deviation status 754 53-1003056-01 Configuration snapshots Configuration Snapshots tab displays, as shown in FigureComparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Saving a configuration snapshot Click Save SnapshotSearching the configuration snaphots Schedule backup Scheduling a configuration backup763 Disabling a backup schedule Edit Automatic Configuration Backup dialog box displaysIP Configuration Wizard Configuration requirementsPayloads PayloadsPayload name Description Product Payloads DNSCreating a payload configuration Select Configure Configuration WizardPayload name Description Interface PayloadsCreating a payload configuration 769 770 53-1003056-01 Save to Flash and Reload Don’t Save to Flash or ReloadSave to Flash Configuration dialog box Deployment Schedule pane 773 Duplicating a payload configuration Modifying a payload configurationDuplicating a payload configuration Select a configuration from the Product Configurations listModifying a payload configuration Deploying a payload configuration Deploying a payload configurationDeleting a payload configuration CLI Configuration Management This chapter CLI configuration overviewViewing existing templates Select Configure CLI ConfigurationViewing existing templates Product configuration templates Creating a new product configurationProduct configuration templates To create a new configuration, complete the following steps780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 Changing product credentials CLI Credentials dialog boxImporting parameter values into a configuration Previewing CLI commands Previewing CLI commands Different values for each targetSame value for each target Select a row in the Parameters table Click PreviewCLI command guidelines CLI command guidelinesCopying a product configuration Editing a product configuration Testing a configuration To test a configuration, complete the following stepsValid and invalid responses from devices Editing the CLI responses properties fileEditing the Network OS CLI responses properties file SuccessresponsestartSuccessresponseend FailureresponseendConfiguration command response validation Valid and invalid responses from devicesDeleting a configuration Using a dash character in CLI Configuration managerConfiguration error checking To delete a configuration, complete the following stepsCLI configuration deployment Deploying a configuration on demandMonitoring configurations Creating a monitoring configuration796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration Select Reports Product CLI CLI deployment reportsViewing CLI deployment reports CLI configuration scheduling Configuring a one-time deployment scheduleConfiguring an hourly deployment schedule Product CLI Report displaysConfiguring a daily deployment schedule Configuring a weekly deployment scheduleConfiguring a monthly deployment schedule CLI configuration schedulingConfiguring a yearly deployment schedule 806 53-1003056-01 Image Repository for IP Products Obtaining software filesBoot image management Viewing the list of boot imagesProducts supporting the image import Products supporting the image importManually importing boot images Select Configure Firmware ManagementDeploying boot images to products Deleting boot images from the Management applicationSoftware image management Viewing the list of software imagesManually importing software images Software image managementAutomatically retrieving software images from products Click OK on the Import Software Image dialog boxRight-clickConfiguration Schedule Backup Schedule Backup dialog box displays, as shown in FigureDeploying software images to products Deleting software images from the Management applicationUnified image management Unified image managementViewing the list of unified images Importing unified images into the Management application Import Firmware Image from File dialog box displaysClick OK on the Manual Import Unified Image dialog box Updating unified images Deploying unified images to productsDeleting unified images from the Management application Complete the following stepsSerial firmware update and activation for NOS devices Vlan Manager Default VlanVlan Management Private Vlan Remote Switched Port AnalyzerSuper-aggregated Vlan Configuration requirements for Vlan Manager Transparent LAN SupportFeature VCS FC mode Logical chassis mode Standalone mode Displaying a list of VLANsVlan management in a VCS environment Vlan Manager tabsDisplaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Port VLANs Adding or modifying port VLANs828 53-1003056-01 Adding or modifying dual mode ports Select Configuration Manager Vlan ManagerL2 mode Tagged mode Assigning DCB ports to a VlanAdding Vlan properties 832 53-1003056-01 Modifying port Vlan properties Deleting port VLANs from productsDeleting a port Vlan in Vlan view Deleting a port Vlan in Product viewSpanning Tree Protocol configuration Deploying Vlan configurationsSpanning Tree Protocol configuration Select a Save Configuration optionConfiguring STP or Rstp on a port Vlan Target context STP type IOS Vlan STP, RstpSTP, RSTP, Mstp FOS Vlan MstpDeploying an STP configuration on a port Vlan Configuring Mstp on a product Assigning an Mstp instance to a Vlan Adding an Mstp instanceVlan routing Vlan routingManaging IP addresses on an SVI Deploy IP Configuration dialog box Select a Save Configurations option Vlan routing Click the Deploy now optionMpls pre-configuration Mpls ManagementMpls Licensed and Configured Products group Mpls licensingConfiguring LDP Mpls overviewLSP Select the Admin Groups tab Figure Viewing LSP Admin Group informationSelect Configure Mpls LSP Viewing LSP path information Select the Paths tab FigureViewing Rsvp LSP information Select the Rsvp LSPs tab FigureViewing saved LSP configurations Related topics Mpls overviewAdding an LSP admin group LSPEditing an LSP admin group Duplicating an LSP admin groupDeleting an LSP admin group Adding an LSP pathEditing an LSP path You can edit an LSP path by taking the following stepsDeleting an LSP path LSP Delete Path Configuration wizard displays FigureDuplicating an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Delete Rsvp LSP Configuration wizard displays Figure Editing an Rsvp LSPDuplicating an Rsvp LSP Deleting an Rsvp LSPEditing a saved LSP configuration Duplicating a saved LSP configurationSelect the saved configuration Click the Edit button Select the saved configuration Click the Duplicate buttonDeleting a saved LSP configuration Select the saved configuration Click the Delete buttonDisplaying LSP Topologies Select Monitor Mpls LSP TopologyLSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 Viewing VLL instances Select Configure Mpls VLLVLL manager VLL Mode StatusTag Mode Viewing Saved VLL configurations To view current saved VLL configurations, do the followingAdding or editing a VLL instance To add a new VLL instance do the followingConfiguring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box Deploying target actions using the VLL Manager VLL Configuration wizard Deploy Target Actions dialog boxDeploying VLL properties using the VLL Manager VLL configuration wizard Deployment PropertiesScheduling deployment using the VLL Manager VLL configuration wizard Deployment Schedule dialog boxReviewing the VLL Manager configuration Reviewing the VLL Manager summaryCreating a new VLL instance using duplicate Editing a VLL instanceDeleting VLL instances To edit a VLL instance, do the followingVLL Monitor Dialog box displays Figure Filtering VLL traffic monitoringSelect Monitor Mpls VLL Virtual Private LAN Services Vpls overview VLL883 Select Configure Mpls Vpls Vpls ManagerViewing Vpls instances and peer topologies Vpls ManagerVpls settings Endpoint settings PE DevicesVpls Manager Peer Topology tab Viewing Saved Vpls configurations To view current Vpls configurations, do the followingAdding or editing a Vpls instance Configuring devices using the Vpls Manager Vpls Configuration wizard Device Configuration dialog boxConfiguring endpoint settings Row is added to the Configured Endpoint Settings listDeploying target actions using Vpls Manager Deployment Properties page displays FigureDeploying Vpls properties using Vpls Manager Vpls Configuration wizard Deployment Properties dialog boxScheduling deployment using Vpls Manager Vpls Configuration wizard Deployment Schedule dialog boxReviewing the Vpls Manager summary Creating a new Vpls instance from a duplicateTo edit a Vpls instance, do the following Editing a Vpls instanceDeleting a Vpls instance Vpls Monitor dialog box displays Figure Filtering for Vpls traffic monitoringSelect Monitor Mpls Vpls Select Configure Mpls Vcid Pool Vcid poolsViewing, creating, and deleting Vcid pools Vcid pools802.1ag Connectivity Fault Management Configuring a maintenance associationAdd Maintenance Association dialog box displays 802.1ag CFM900 53-1003056-01 Editing a maintenance association 802.1ag Connectivity Fault ManagementClick Close on the Configure 802.1ag CFM dialog box Edit Maintenance Association dialog box displays902 53-1003056-01 903 Adding a MEP to a maintenance association 28 802.1ag Connectivity Fault Management905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Sending a linktrace message Click LoopbackClick Linktrace Configuring frame delay 915 916 53-1003056-01 Select Configure Application Delivery VIP Servers VIP ServersVIP Servers overview Viewing the VIP ServersViewing the VIP Servers Viewing VIP Server information Viewing VIP Server informationVIP Servers list Enabling or disabling servers or server ports Server port statisticsEnabling servers or server ports Disabling servers or server portsDeleting a row from the Server Port Statistics list Global Server Load Balancing Gslb ManagerTo view the Gslb Manager, perform the following steps Select Configure Application Delivery GslbViewing the Gslb Manager Gslb policy management Creating a Gslb policyGslb policy management To create a Gslb policy, perform the following steps926 53-1003056-01 Applying metrics on the Metrics tab Connection Load Weights Adding a prefix on the Prefix tabDeleting a prefix from the Prefix list Importing IP addresses from a file930 53-1003056-01 Gslb site management Adding a site configurationGslb site management Adding ServerIron ADX products to the site Gslb zone configuration Adding a zone configurationGslb zone configuration Managing zonesAdd Hosts dialog box Adding a host to a zone List of IP Addresses and Weights dialog box displays Editing the list of IP addresses and weightsDeleting a zone configuration Controller Configuration tab displays Controller configurationController configuration Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL Certificates for ServerIron Products SSL certificatesSSL certificate configuration Accessing SSL certificates on the Certificate View tabSSL Certificates dialog box has two tabs Certificate View tab Figure Product View tab Figure945 Accessing SSL certificates on the Product View tab SSL Certificates dialog box Product View tabGenerating a certificate signing request 948 53-1003056-01 949 Adding an SSL certificate and key file Related topicEditing an SSL certificate and key file Duplicating an SSL certificate and key file Viewing SSL certificate detailsImporting certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Appending SSL certificates Chaining SSL certificates960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Editing a deployment configuration Select Configure Task SchedulerDeployment Manager Introduction to the Deployment ManagerDuplicating a deployment configuration Deleting a deployment configuration Deploying a configurationViewing deployment logs Generating a deployment reportGenerating a deployment configuration snapshot report Searching the configuration snapshots967 968 53-1003056-01 Performance Data SAN performance overviewSAN performance measures SAN performance overviewExample of default access control list SAN performance management requirementsExample of Snmp Example of setting Snmp 974 53-1003056-01 FCIP-MIB YES Snmp GETSnmp SET SAN real-time performance data Generating a real-time performance graphSAN real-time performance data Select Monitor Performance Real-Time GraphOpen the Real Time Performance Graphs dialog box Filtering real-time performance dataReal Time Performance Graphs dialog box displays Graph display Exporting real-time performance data Performance statistics countersProtocol Fcip SnmpHttp HBA, CNA HCM APIFC, GE HBA, CNAType Protocol Source OID value IP configuration requirements IP performance monitoring and traffic analysisIP real-time performance monitoring IP real-time performance monitoringMonitoring real-time performance 984 53-1003056-01 Click Sources from the Real Time Graphs/Tables dialog box Adding products and ports to real-time performanceRemoving products and ports from real-time performance Adding measures to products Removing measures from productsSelect measures Real Time Graphs/Tables dialog box displays Click Mibs tab in the Available Measures areaAdding measures to ports Removing measures from ports Adding collectibles to monitoringRemoving collectibles from monitoring Configuring the performance graphConfiguring the performance graph display Show data points graph Configuring graph options Minutes Hours DayGraph Options dialog box Historical Graphs/Tables dialog box 993 Exporting a graph Printing a graphChoose Export File Format dialog box displays Spreadsheet .csv Image .pngIP historical performance monitoring Editing system collectors Displaying historical data collectorsIP historical performance monitoring Name Collector Basics997 Enabling a historical data collector Adding or editing a historical data collector999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Duplicating a historical data collector Configuring a MIB walk instanceAdding third-party device MIB objects manually Deleting a historical data collector Adding, editing, or duplicating a user-defined expressionDuplicating system data collectors Select Monitor Performance Historical Data Collectors1007 Deleting an expression Complete the following steps to delete an expressionViewing Historical Graphs/Tables Select the Data Monitoring tabNetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs MIB data collectors Mapping a MIB object to a unit nameMIB data collectors To map a MIB name, use the following formatIP Custom performance reports Creating a custom reportIP Custom performance reports Complete the following steps to create a report1015 Time Settings Sampling Granularity 1017 Click the Identification tab Interpreting the Snmp Monitor report Exporting an Snmp Monitor reportIP sFlow configuration IP sFlow configurationConfiguring sFlow Interface Speed Sampling rate IP sFlow configuration Click NextInterface Payload sFlow Settings dialog box displays Product Payload SFlow Destination dialog box displays Click Next Creating custom sFlow reports Select the Report Definitions tabIP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Select the User Identification tab Add Report Definitions dialog box, User Identification tabAdd Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Scheduling custom sFlow reports Select Monitor Traffic Analysis Custom Reports1035 1036 53-1003056-01 Suspending a custom sFlow report schedule Device-level configuration requirementsIP Traffic analyzer monitoring and sFlow reports 802.1X configuration requirements Displaying sFlow monitoring reportsIP Traffic analyzer monitoring and sFlow reports Select Monitor Traffic Analysis Monitor sFlowSelecting a report Report listMeasure list This field shows the date and time the report was requested Save and close the ipconfig.properties fileInterpreting an sFlow traffic report Viewing top MAC talkers Viewing top Vlan talkers Category list, select L3/L4 ReportsViewing all Layer 3 and Layer 4 traffic Viewing all IPv4 Layer 3 or Layer 4 Top TalkersViewing IPv4 top TCP talkers Reports list, select IPV4 Next list, select TCPTCP Viewing IPv4 top UDP talkers Icmp Viewing IPv4 top Icmp talkersCategory list, select L3 or L4 Reports Viewing IPv4 Others Viewing IPv6 Top TalkersViewing other Layer 3 or Layer 4 Top Talkers Enabling and viewing TCP reports Defining invalid TCP packet combinationsRST-SYN RST-FIN RST-PSH RST-URG FIN-SYN Complete the following steps to change these combinationsType list, select Invalid TCP Flags Displaying the invalid TCP Flags reportValid TCP flags report Viewing BGP paths report Viewing VCS fabric Top Talker reportsTroubleshooting sFlow reports IP traffic accountingIP traffic accounting Select Monitor Traffic Analysis Traffic Accounting1055 1056 53-1003056-01 Frame Monitor Frame MonitorScsi RW Frame typesScsi Creating a custom frame monitor Frame Monitoring requirementsFrame Monitor Configuration Status dialog box Editing a frame monitor Assigning a frame monitor to a portFinding frame monitor assignments Removing a frame monitor from a portRemoving a frame monitor from a switch 1064 53-1003056-01 Power Center Power center overviewViewing PoE data for products Select Monitor Power CenterData monitoring Viewing PoE data for ports To view PoE data for a port, complete the following stepsFiltering port details To filter port details, complete the following stepsViewing attached device properties 1070 53-1003056-01 Viewing PoE charts To view a PoE chart, complete the following steps1072 53-1003056-01 1073 Refreshing PoE data PoE power on demand Configuring automatic data refreshPowering up PoE-capable ports on demand PoE power on demandPowering down PoE-capable ports on demand Schedule PoE power deployment Scheduling an power up deploymentSchedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Click Show Ports Scheduled Ports ScheduleName dialog box displaysDeleting a power deployment schedule PoE thresholds PoE thresholdsAdding a PoE product threshold PoE Allocation PoE Consumption Consumption %Adding a PoE port threshold Thresholds dialog box Choose one of the following measures Port allocation Port consumption Port consumption %Viewing PoE thresholds To view PoE thresholds, complete the following stepsTo update a PoE threshold, complete the following steps Updating a PoE thresholdTo enable PoE thresholds, complete the following steps To disable PoE thresholds, complete the following stepsEnabling PoE thresholds Disabling PoE thresholdsMonitoring real time power performance on products Viewing PoE performanceDeleting PoE thresholds Viewing PoE performance1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy Monitor Policy monitor overviewFabric policy monitors Policy monitor overviewSwitch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Preconfigured policy monitors Next Run Next time the policy will run using the formatManagement policy monitor Frequency WeeklyViewing policy monitor status Viewing existing policy monitors Adding a policy monitor Select Monitor Policy Monitor1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Configuring a one-time policy monitor schedule Policy monitor schedulingConfiguring an hourly policy monitor schedule Configuring a daily policy monitor scheduleConfiguring a weekly policy monitor schedule Configuring a monthly policy monitor scheduleEditing a policy monitor Deleting a policy monitorPredefined configuration rules Configuration rulesViewing a predefined configuration rule Add Configuration Rule dialog box displays Figure Viewing configuration rule detailsConfiguration rules Port Profile Interface Rule expressions 1118 53-1003056-01 1119 Adding a configuration rule Click Cancel on the Add Configuration Rule dialog boxDuplicating a configuration rule Click OK on the Add Configuration Rule dialog boxClick Add Configuration Rule Editing a configuration ruleClick the Switch/Router Checks tab Exporting a configuration rule Importing a configuration ruleDeleting a configuration rule Click OK on the Edit Configuration Rule dialog boxAdd Configuration Rule dialog box displays Viewing predefined configuration conditionsAdding a configuration condition Select Add Condition Add Condition dialog box displays FigureDuplicating a configuration condition Selecting a productEditing a user-defined configuration condition You cannot edit a predefined configuration conditionPredefined conditions Configuration rules Predefined conditions Viewing a predefined configuration block Policy Monitor dialog box displays Click AddAdding a configuration block Configuration rules Add Monitor dialog box displaysSelect Add Block Add Block dialog box displays FigureDuplicating a configuration block Select the Switch/Router Checks tabEditing a user-defined configuration block You cannot edit a predefined configuration blockClick Delete Click Yes on the confirmation message Deleting conditions and blocksPredefined blocks Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report1137 Exporting a policy monitor report Click Export File Download dialog box displays Click SaveViewing historical reports for all policy monitors Viewing historical reports for a policy monitorPolicy Monitor dialog box displays Click HistoryViewing historical reports for a policy monitor Fault Management Fault management overviewEvent notification RestrictionsSupported IP address types Event Purging1143 Defining filters Setting up basic event filteringDefining filters Setting up advanced event filtering Click Advanced1146 53-1003056-01 Snmp traps Adding a trap recipient to one or more switches Select Monitor Snmp Setup Product Trap RecipientsSnmp traps Snmp Trap Recipients dialog box, shown in , displaysRemoving a trap recipient from one or more switches Select Monitor Snmp Setup Trap ForwardingSnmp trap forwarding Snmp Trap Forwarding dialog box, shown in , displaysSelect the Enable trap forwarding check box Adding a trap destinationAdding a new trap filter 1152 53-1003056-01 Event reception Event Reception dialog box, shown in , displays Do not accept Snmp v1/v2c trapsAccept Snmp v1/v2c traps with any community string Accept Snmp v1/v2c traps with only these community stringsAdding an Snmp v3 credential Snmp traps Snmp security and authenticationPrivacy protocol Authentication Result Credential type Adding an Snmp v1 or v2c community string Importing a new MIB into the Management applicationTrap customization Registering traps Click the Registered button Unregistering a registered trapCustomizing a registered trap definition Reverting the customization of a registered trap to default Snmp informsEnabling or disabling Snmp informs Select a product group from the Fabric / Products listSyslogs Adding a syslog recipientTo remove a syslog recipient, complete the following steps Removing a syslog recipientSyslogs Select Monitor Syslog Configuration Syslog Forwarding Select the Enable syslog forwarding check boxAdding a syslog forwarding destination Syslog Forwarding dialog box, shown in , displaysAdding a syslog filter 1165 Event action definitions Snort message forwardingCreating an event action definition Select Monitor Event Processing Event ActionsSelecting an event for an event action Event action definitions1168 53-1003056-01 Configuring varbind filters Selecting source address products and ports Sources pane of the Add Event Action dialog boxClick Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Special events handling Acknowledging special events1177 Configuring event action e-mail settings Click Cancel to cancel the operation Modifying an event action definitionConfiguring event actions for Snort messages Deleting an event action definitionImport Snort Rule File dialog box displays, shown in Figure Pseudo eventsClick the Import Snort Rule button Displaying pseudo event definitions Creating pseudo event definitionsSelect Monitor Event Processing Pseudo Events Pseudo Events dialog box, shown in , displaysSetting pseudo event policies Filtering pseudo event traps 1185 Editing a pseudo event definition Deleting a pseudo event definitionAdding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Select Reports Event Custom Reports Defining report settingsEvent custom reports Defining the report identity 1196 53-1003056-01 Filtering a report definition To filter a report definition, complete the following stepsAdd/Edit Report Definition dialog box Filter tab Filtering report events by date and time Add/Edit Report Definition dialog box Product tab displays1200 53-1003056-01 Editing a report definition Event custom report schedules Event custom report schedulesDeleting a report definition Adding or editing an event report schedule One Time Event logs Viewing event logsCopying part of a log entry Event logsCopying an entire log entry Exporting the entire logDisplaying event properties from the Master Log Mailing all event details from the Master LogMailing selected event details from the Master Log Event Field Description Event logs Event PropertiesClick Close to close the Event Properties dialog box Copying part of the Master Log Copying the entire Master LogExporting the Master Log Select Table Copy TableFiltering events in the Master Log ‘unnamed’ filter ‘none’ filter Editing a FilterDuplicating a Filter Deleting a FilterConfiguring packet captures Select Configure Packet Capture PcapConfigure Pcap dialog box, shown in , displays Packet Capture Pcap1214 53-1003056-01 Capturing Server and Client support save data Technical SupportServer and client support save Capturing Server support save data Capturing Client support save data Client support save using a command line interface Server and client support saveDevice technical support Scheduling technical support information collectionDevice technical support Click the Schedule tabSelect the Enable scheduled Technical Support Data check box 1221 Starting immediate technical support information collection Click OK on the Technical SupportSave dialog boxClick the Generate Now tab, if necessary Click Close on the Technical SupportSave Status dialog box Field DescriptionFirmware Type ProgressType Default location Default naming convention Viewing the technical support repositorySaving technical support information to another location Click OK on the Technical Support Repository dialog boxAvailable SupportSave Mail buttonMailing technical support information Deleting technical support files from the repository Select the file you want to delete in the table Click Delete1229 1230 53-1003056-01 Reports Reports overviewViewing IP reports Browser requirementsExporting and saving IP reports to a file Exporting IP reports to e-mail recipientsSelect Export as Html Select Export as CSV Select E-mail as Html Select E-mail as CSVIP report contents IP Wired Products reportIP Wired Products report Stacking Units Detailed Product ReportExport button Stacking Port RealtimeModules IP AddressesCluster Peer MCT Physical PortsGRE Tunnels Controller ClusterDetailed Cluster Report AP List CountNodes System InformationSystem Name values Physical Media IP Module reportFC Ports Field/ComponentDescription IP Port VLANs reportIP Layer 3 Vlan report IP Subnet report IP Subnet report Layer 3 Vlan report fields and componentsIP Address report MAC Address reportIP Address report Port NameIP Physical Ports Realtime report IP Physical Ports Realtime reportIP Stacking Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime reportIP Deployment reports Viewing a deployment reportIP Deployment reports Select Reports DeploymentPreconfigured reports Reports Template Manager overviewUser-defined reports Reports Template Manager overviewReport Template Manager dialog box displays Figure Accessing the Report Template ManagerSelect Reports Report Manager Viewing a report Deleting reports Importing a report templateExporting a report template Report content and functions Products List report Product CountIP address of the product Displayed for products that support stacking Physical port information for each port on the product Cluster Product ReportPorts Tx/Rx Ratio report Summary table Location Device NameDetailed Product Report Total Received MBMax Rx Utilization % Low Traffic Ports reportMax Tx Utilization % Exporting data from the report Menu Command Command Options Application menusThis appendix Dashboard main menusCommand Command Options IP main menusIP main menus Edit MenuDiscover Menu Configure Menu Element Manager. Select to configure a selected deviceLsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu Tools Menu IP shortcut menusIP shortcut menus Component Menu/Submenu Commands Comments IP shortcut menus IP SubnetIronWare device Launches the Real-Time Graphs / Tables dialog boxDCB L2 ACLVCS/VDX Third-party device 1273 1274 53-1003056-01 Call Home Event Tables IP Call Home EventNetwork OS Call Home Event Event reason code FRU code/Event type Description SeverityCall Home Event Tables Network OS Call Home Event Event Categories Product status eventsProduct audit events Security events Security events for FC devicesSecurity events for IP devices Security eventsUser action events Management server eventsProduct events IP Performance monitoring eventsProduct events Trap nameIP Performance monitoring events User Privileges About user privilegesAbout user privileges Application privileges and behavior Privilege Description No Privilege Read-Only Read/WriteSetup Mail server used to Send e-mail Disables Event Event Notification Setup button in the Users dialog boxOptions command RegistrationForwarding dialog box Monitor menu Event Storage option Syslog RegistrationManagement command Enables the Security L2Update and OK Performance Graphs dialog box and enables all controlsDisables Policy Monitor Enables Policy Monitor Policy monitors Command on the Monitor MenuServer Options menu Configure Switch Replicate menuLogs menu SupportSave, Upload Repository command Upload Failure Data View Repository Technical Support menu Repository commandsCapture, and View Monitor Technical1291 Cancel and Help buttons ZoningCompare/Merge dialog Compare and ExportSwitch, Activate Compare/Merge dialog Zone Config tabZoning Scope list does Edit Limits commandLsan Zoning Device About user privileges IP privileges and behavior IP CLIIP L3 ACL FilterIP Mpls VLL IP Mpls VplsIP MPLS- LSP Profile tabApplication Features and Role Access Levels About Roles and Access LevelsAbout Roles and Access Levels IP privileges and behavior 1299 IP Mpls LSP Viewing Fabric properties Device PropertiesViewing SAN device properties Click OK on the FabricName Properties dialog box to close Viewing SAN device propertiesViewing SAN device properties Fabric properties Viewing SAN device properties Device properties Preshared key configured Remote Switch NameRemote Switch IP Remote Switch WWNSelect Edit Properties Viewing Storage propertiesICL Viewing SAN device properties Viewing iSCSI Properties dialog box Command Descriptor Block Count Digest Error CountISCSI Service ISNS ServiceViewing port properties Class of Service Additional Port InfoAddress Active FC4 TypesViewing SAN device properties Port properties Long Distance Setting ISCSI buttonISCSI Capable Locked Port TypeSymbolic Name Troubleshooting listPort Speed Gb/s Port StateIP device properties Viewing IP device and port propertiesIP device properties Port properties User Port #VCS Mode Config ModeDetailed Report button AliasIP device properties Profile Mode Access Points tabPort Profiles tab Show listConnected switch \ Port Transceiver TemperatureChassis-Power Supply section of Detailed Report Device MACViewing VCS fabric properties Licensed Features Access Gateway ModeNodes tab Fabric StatusMAC Count VLANsDomain Count Associated MACs listNative VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port SFP/Port Optics Host propertiesHost properties Viewing adapter port properties Field DescriptionHost properties Adapter port properties Properties customization Adding a property fieldProperties customization Adapter port properties Click OK to closeEditing a property field Deleting a property fieldEditing a property field directly Properties customization Construct Matches Regular ExpressionsCharacters Regular Expressions Characters Character classesPredefined character classes Posix character classes US-ASCII onlyRegular Expressions Posix character classes US-ASCII only Java.lang.Character classes simple java character typeClasses for Unicode blocks and categories Boundary matchesRegular Expressions Greedy quantifiers Reluctant quantifiersPossessive quantifiers Logical operatorsRegular Expressions Back references Special constructs non-capturingRegular Expressions CLI Templates CLI Templates HyperEdge Stack Enable HyperEdge Stack DisableHyperEdge Stack Port Creation HyperEdge Stack Port DeletionIronWare OS Enable Web Element Manager IronWare OS Configure L3-Access-ListCLI Templates HyperEdge Stack Trunk Deletion HyperEdge Peri Port CreationCLI Templates IronWare OS Configure L2-Access-List MCT Cluster CreationMCT Cluster Deployment MCT Cluster UndeploymentMpls Loopback Interface Configuration Mpls Core Interface ConfigurationCLI Templates MCT Cluster Deletion MCT Client CreationCLI Templates Mpls Endpoint Configuration Network OS Configure CRC Align Errors MonitorNetwork OS Associate MAC to Port Profile AmppNetwork OS Configure Inter Frame Gap Violation Monitor CLI Templates Network OS Configure Extended L2 Access ListNetwork OS Configure Inter Frame Gap Violation Fencing Network OS Create CoS Mutation Map Network OS Configure RX Symbol Errors MonitorNetwork OS Configure Standard L2 Access List CLI Templates Network OS Create Lldp Profile Network OS Create Port ProfileNetwork OS Create Traffic Class Map Network OS Create Vlan Classifier GroupNetwork OS Update ACL on Port Profile Network OS Update QoS on Port ProfileNetwork OS Update Vlan on Port Profile CLI Templates Network OS Create Vlan Classifier RuleCLI Templates Private Vlan Configure Vlan as a Pvlan Private Vlan Delete Pvlan configuration from VlanPrivate Vlan Configure Pvaln mode in L2 interface Private Vlan Add native Vlan mode to Pvlan trunkPrivate Vlan Delete Pvlan mapping from promiscuous port Private Vlan Delete Pvlan associations from host portPrivate Vlan Delete Pvaln associations from trunk port $PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGERVRF Route Distinguisher Configuration VRF Maximum routes configuration for IPV4 Address FamilyVRF Route Targets Export and/or Import Configuration VRF Delete Route Targets Export and/or Import ConfigurationIronWare OS Vlan Configure virtual routing interface IronWare OS Vlan Enable Spanning Tree Protocol on IOS VlanCLI Templates VRF Display VRF Information IronWare OS Vlan Remove interfaces from Vlan as untaggedNetwork OS Vlan Layer2 Switch Port Configuration Network OS Vlan Native Vlan ConfigurationNetwork OS Vlan Vlan Interface Creation Network OS Vlan Vlan Interface DeletionNetwork OS Vlan Enable Spanning Tree Protocol on NOS Vlan Network OS Vlan Access Interface ConfigurationNetwork OS Vlan Disable Access Interface Configuration 1356 53-1003056-01 Troubleshooting Application Configuration Wizard troubleshooting Browser troubleshootingClient browser troubleshooting Configuration backup and restore troubleshootingElement Manager troubleshooting Client browser troubleshootingFirmware download troubleshooting Firmware download troubleshootingSw0FID128admin sshutil delknownhost Select Start Settings Control Panel Java Launch Client troubleshootingLaunch Client troubleshooting Unix operating systems Master Log and Switch Console troubleshootingMaster Log and Switch Console troubleshooting Patch troubleshooting Patch troubleshootingClick the Global Settings tab Select Discover IP ProductsProfessional edition login troubleshooting Professional edition login troubleshootingServer troubleshooting Management console errors Server Management Console troubleshootingServer Management Console troubleshooting Select Properties Supportsave troubleshootingSupportsave troubleshooting Technical support data collection troubleshooting Wireless troubleshootingTechnical support data collection troubleshooting Problem Master log warning messageZoning troubleshooting Zoning troubleshooting Wireless troubleshootingZoning troubleshooting Achcallcenterconfig Database FieldsDatabase tables and fields AchcallcenterDatabase tables and fields Achevent AcheventfiltermapAchfilter AchinfoAdapterportconfigdetails AdapterportconfigpropertyAdapterdriverfiledetails AordevicegroupmapAordevicemap AorfabricmapAorhostmap AorinmportgroupmapBirtreportruntemplate AvailableflyoverpropertyBirtreportparameter Birtreportscheduleconfig BootimagedrivermapBootimagefiledetails Database tables and fields BirtreportruntemplateDatabase tables and fields Bootimagefiledetails BootlunsequenceBootlunsequencedetail CapabilityDatabase tables and fields Card Cardcapability CedapplicationCedapplicationmember CeduserpreferenceCfgbackuparchive CeeportClitemplate Database tables and fields CfgbackuparchiveChangelog Database tables and fields Clitemplate ClientviewClientviewcolumn ClientviewmemberClientviewmemberhost ClusterCnaproductconnectivity CnaethportconfigCnaethport Collector Database tables and fields CnaethportconfigCnaport Configblock CollectormibobjectentryCollectorsnmpexpressionentry CollectortargetentryConfigcondition CoreswitchDatabase tables and fields Coreswitch Coreswitchcapability CoreswitchchecksumCoreswitchcollection CoreswitchdetailsDatabase tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Database tables and fields Cryptoswitch CryptotargetcontainerDashboard Database tables and fields CryptotargetcontainerCustomfavoritesobjectlist Database tables and fields Dashboard DashboardcanvasDashboardcanvaspreference DashboardproviderDashboardwidget Dashboardwidgetpreference DefaultfavoritesDatabase tables and fields Dashboardwidget Deploymentconfiguration Database tables and fields DefaultfavoritesDefaultwidgetpreference Deploymentproductstatus Database tables and fields DeploymentconfigurationDeploymenthandler Deploymentstatus Database tables and fields DeploymentproductstatusDeploymentreporttemplate Deploymenttargetmap DeviceDatabase tables and fields Device Tacpasswordportcfg TacpasswordreadonlyTacpluspasswordportcfg TacpluspasswordreadonlLicensedfeatures TrapregisteredPortcount MplsmanagestateIsdcbswitch ProductfamilyNetconftransport =SSH =HTTPS =WINGHTTPS PoecapableIsprincipalswitch WirelesstypeVcsid VcslicensedDeviceconnection DeviceenclosureDatabase tables and fields Deviceenclosure Deviceenclosuremember DevicefdmidetailsDevicegroupentry Database tables and fields DevicefdmidetailsDevicegroup Devicenode Database tables and fields DevicegroupDevicemacgroupmapping Database tables and fields Devicenode DeviceportDeviceportgigeportlink DeviceportmacaddressmapDiskusage EncryptionengineDatabase tables and fields Encryptionengine EncryptiongroupDatabase tables and fields Encryptiongroup Encryptiongroupmember EncryptionkmipparametersEthernetisl EncryptiontapepoolEthernetcloud Event Database tables and fields EthernetislDatabase tables and fields Event EventcallhomeEventcategory EventdescriptionEventdetails EventfwdfilterEventmodule Database tables and fields EventfwdfilterEventinstance Eventpolicy EventnotificationEventorigin Database tables and fields Eventpolicy EventpolicysourceentryEventprocessormap EventruleDatabase tables and fields Eventpolicysourceentry Eventruleaction FabricDatabase tables and fields Eventrule Database tables and fields Fabric Fabricchecksum FabriccollectionDatabase tables and fields Fabriccollection FabricdiscoverypolicyFabricdiscoverypolicyrule FabricmemberFabricthresholdsetting FavoritesDatabase tables and fields Fabricmember FabricvcsclustermapFcipporttunnelmap Database tables and fields FavoritesFcipcircuitportmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Mismatchedconfigurations SecurityflagCircuitstatus CircuitstatusstringFciptunnelperformance Feature FeatureeditionmapFeaturesusage FcoedeviceFirmwarefiledetail Database tables and fields FeaturesusageFicondeviceport Foundrymodule FirmwareswitchdetailFoundrydevice Database tables and fields Foundrymodule FoundryphysicaldeviceFoundryphysicalport FporttrunkgroupFRU Generatedreport FtpserverDatabase tables and fields FRU Gigeport Database tables and fields GeneratedreportGigeportethernetcloudlink GigeportstatsGlobalvlan GretunnelinterfaceHacluster HBADatabase tables and fields HBA Hbaport HbanodemapSwitchip OperatingtopologySUPPORTEDFC4TYPES SupportedcosHbaportdetail Database tables and fields Hbaportdetail Hbaportdeviceportmap HbaportfcoedetailsDatabase tables and fields Hbaportfcoedetails Hbaremoteport Database tables and fields Hbaremoteport HbaremoteportlunHbatarget HealthstatusHealthtargetstatus HostdiscoveryoptionHostdiscoveryrequest Database tables and fields HostdiscoveryoptionHostdiscoveryreqgroup Database tables and fields Hostdiscoveryrequest HypervvirtualmachineInterface HypervvmhbaportmapIFL Ipdevicelicense InterfacedeploymentconfigDatabase tables and fields Interface Ipportgroup Database tables and fields IpdevicelicenseIpinterface Iproute IpsubnetvlanIpxnetworkvlan ISLSourceswitchportid TargetswitchportidDatabase tables and fields ISL IslconnectionIsltrunkgroup MasterconnectionidSourcemasterport TargetmasterportKeyvault L2ACCESSCONTROLENTRYIsltrunkmember Database tables and fields L2ACCESSCONTROLENTRY L2ACCESSCONTROLLISTL2ACLDEVICEDEPLOYMAP L2ACLINTERFACEDEPLOYMAPDatabase tables and fields L2ACLINTERFACEDEPLOYMAP L2NEIGHBORL3ACLDEVICEDEPLOYMENTMAP L3ACLINTDEPLOYMENTMAPLagmember LAGDatabase tables and fields L3ACLINTDEPLOYMENTMAP Launchincontextmodule LastconfigupdatetimeDatabase tables and fields Lagmember Licensedowngradedetails LicenseDatabase tables and fields Launchincontextmodule Licensefeaturemap LicensedfeatureDatabase tables and fields Licensedowngradedetails LicenseruleLsantagconfig LockLsandevice LsanproxydeviceLsanzonedbconfig LsanzoneLsanzonemember MctclientDatabase tables and fields Macfilter MacfilterdevdeploymentmapMacfilterintdeploymentmap MacgroupMacgroup MapseventMacgroupmember ManagedelementMapseventcauseaction Database tables and fields MapseventMapseventdetails Measure MapspolicyMarchingants Migrationhistory ModuleMessagerecipient Database tables and fields Module Mplsadmingroup MplsadmingroupinterfacerelationMplslsp ModuleslotpresentMplsrsvplsp MplspathMplspathhop Mplsrsvplspadmingroup MplsrsvplspadmingroupcontainerDatabase tables and fields Mplsrsvplsp MplsrsvplspactuallyroutedhopMplsrsvplspfrrparameters MplsrsvplspparametersMplsservice Database tables and fields MplsrsvplspparametersMplsrsvplsppath MplsrsvplsptunnelresourceMplsserviceendpointrelation Database tables and fields MplsserviceMplsservicedevicerelation Database tables and fields Mplsserviceendpointrelation MplsservicepeerrelationMrpring MrpringdeviceDatabase tables and fields Mrpringdevice N2FPORTMAP NetworkvlanNetworkscopetype NicprofileDatabase tables and fields Nportwwnmap NpflowdefinitionOuiguesseddevicemap Database tables and fields NpflowdefinitionNpsubflow Passwordhistory PbrinterfaceconfigOuivendor PerfcollectorPbrpolicy PbrrulePbrnexthop PbrruleacllistPhysicaldevice Database tables and fields PbrruleacllistPhantomport Database tables and fields Physicaldevice PhysicalinterfacePmcollectormeasuresetting PmcollectortargetsettingDatabase tables and fields Physicalinterface PhysicalportPmdashboardwidget Database tables and fields PmcollectortargetsettingPmcollectortimeseriesmapping Database tables and fields Pmdashboardwidget PmdatacollectorPmstatsagingpolicy PmmeasureDatabase tables and fields Pmdatacollector Pmwidgetmeasuretype PmwidgetmeasuretypeentryPmwidgetmonitortype PmwidgettargetentryDatabase tables and fields Pmwidgettimeseriesentry PmwidgettopncollectorentryPmwidgetuserentry PoethresholdDatabase tables and fields Poethreshold PoethresholdeventPolicyrule PolicyrulemapPortcommissioncimomserver PortbottleneckconfigPortbottleneckstatus Portfencingpolicymap Database tables and fields PortcommissioncimomserverPortfencingpolicy Portprofiledomain Database tables and fields PortfencingpolicymapPortprofile Portprofiledomainmap PortprofileinterfacemapPortprofilemacmap PortprofileqosmapPortprofileqospfcmap PortprofilevlanmapPortvlan Productapp PrivilegeDatabase tables and fields Portvlan Protocolvlan QrtzblobtriggersQrtzcalendars QrtzcrontriggersQrtzlocks QrtzjobdetailsQrtzjoblisteners QrtzpausedtriggergrpsDatabase tables and fields Qrtzschedulerstate QrtzsimpletriggersQrtzjtriggerlisteners QrtztriggersRecoverycardgroupmapping RaslogQuerybaseddevicegroup QuorumcardgroupmappingReporttype ReporttemplateReportdrilldowntemplate ResourcefabricmapRole ResourcehostmapRoleprivilegemap RuleblockmapSanconnection SANRulelogicalexpressionmap Securitypolicy ScomhostDatabase tables and fields Sanconnection Sensor SelectedflyoverpropertySensorid CurrentreadingSflowcheckpoint SflowhoursummaryInpriority OutprioritySrcmac L3SRCADDRSflowiprouteinfo SflowminutebgpDatabase tables and fields Sflowminutebgp SflowminutebgpslnumSFLOWMINUTEL3SLNUM SflowminutemacDatabase tables and fields Sflowminutemac SflowminutemacslnumSflowminutesummary SflowminutevlanDatabase tables and fields Sflowminutevlan SflowminutevlanslnumSFLOWREPORTL3SOURCE SFLOWREPORTL4SOURCEDatabase tables and fields Sflowstaging Smartcard SflowstagingslnumDatabase tables and fields Smartcard SmiasannameSnapshotproductstatus SnmpcredentialsSnmpdata Database tables and fields SnmpcredentialsDatabase tables and fields Snmpdata SNMPDATA1DAYSNMPDATA2HOUR MibindexSNMPEXPRDATA1DAY SNMPDATA30MINSnmpexprdata Database tables and fields SNMPEXPRDATA1DAY SNMPEXPRDATA30MINSnmpexpression SnmpprofileWritecommunitystring Database tables and fields SnmpprofileReadcommunitystring Snmptrapcredential SNMPV3FORWARDINGCREDENTIALSourceobjecttype SslcertificateSslcertificatevipservermap SslkeyDatabase tables and fields Sslcertificate Sslkeypassword Database tables and fields SslkeyStatsaging StpportStpinstance StpportDatabase tables and fields Stpinstance SwitchbottleneckconfigSwitchconfig SwitchconfigdetailSwitchlicense FieldSwitchmodel SwitchportDatabase tables and fields Switchport Npivenabled FcfastwriteenabledIslrrdyenabled QosenabledDefaultareaid EportdisabledLogicalportnumber LogicalportwwnSwitchportperformance Database tables and fields Switchportperformance Switchthresholdsetting SystemcardenginemappingSystemproperty TargettypeThresholdmeasure ThresholdpolicyTimeseriesdata TIMESERIESDATA1DAYTABLE\399 TIMESERIESDATA30MIN Database tables and fields TIMESERIESDATA1DAYTIMESERIESDATA2HOUR Sumvalue TIMESERIESDATA1TIMESERIESDATA11DAY Database tables and fields TIMESERIESDATA11DAY TIMESERIESDATA12HOURTIMESERIESDATA130MIN MinvalueDatabase tables and fields TIMESERIESDATA130MIN TIMESERIESDATA2TIMESERIESDATA21DAY TIMESERIESDATA22HOURTIMESERIESDATA3 Database tables and fields TIMESERIESDATA22HOURTIMESERIESDATA230MIN TIMESERIESDATA32HOUR Database tables and fields TIMESERIESDATA3TIMESERIESDATA31DAY Database tables and fields TIMESERIESDATA32HOUR TIMESERIESDATA330MINTIMESERIESDATA4 TIMESERIESDATA41DAYTIMESERIESDATA42HOUR TIMESERIESDATA430MINToolapp ToolpathTrill Database tables and fields TIMESERIESDATA430MINTrunkgroupinterface TrilltrunkgroupTrilltrunkmember User TrunkgroupmemberDatabase tables and fields User UseraormapUserdefineddevicedetail UserdefinednetworkscopeUserrealtimemeasuresetting ContentUserpreference UserrealtimemeasuremappingUserresourcemap UserrolemapUserstatemap VportdetailVcnmember VcnpeerVcemprofile VcnpeerVcsclustermember Database tables and fields Vcemprofile VipserverVipserverbinding VirtualcircuitinterfaceVirtualfcoeportstat VirtualfcoeportVirtualfcoeportmacmember Database tables and fields Virtualfcoeportstat VirtualportwwndetailsVirtualswitch Database tables and fields VirtualportwwndetailsDatabase tables and fields Virtualswitch Fcoeloginenabled InsistentdidmodeDOMAINMODE239 DomainidoffsetHifenabled MapsenabledactionsCLUSTER1 Vcsid MonitoredVlan Vlaninterfacemember VlaninterfacerelationVlanintctagrelation VlanintmacgrouprelationVllendpointrelation VmotioneventDatabase tables and fields Vmotionevent VmotionpnicdetailsVmdatacenter VmdatastoredetailsVmdvport Database tables and fields Vmdvport VmdvportgroupVmdvswitch Database tables and fields VmdvportgroupVmfchba Database tables and fields VmdvswitchVmdvswitchhostmember Vmfchbadeviceportmap VmhostDatabase tables and fields Vmfchba Vmhostenddevconnectivity VmhostproxyswitchDatabase tables and fields Vmhost Vmhostvirtualnic Database tables and fields VmhostproxyswitchVmhostproxyswitchpnicspec Vmnicteamingpolicy VmnetworksettingsDatabase tables and fields Vmhostvirtualnic Vmpath Database tables and fields VmnicteamingpolicyVmphysicalnic Database tables and fields Vmphysicalnic VmsecuritypolicyVmstdvswitchportgroup VmstandardvirtualswitchVmstandardvswitchport Database tables and fields Vmstdvswitchportgroup VmstorageVmtrafficshapingpolicy VmvcenterVmstoragehbaremoteportmap Vmvirtualethernetadapter Database tables and fields VmvcenterVmvcentermember Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Database tables and fields Vmvirtualmachine VmvirtualmachinedatastoremapVplsdevicerelation VplsendpointrelationVrconnfcconnection VrconndomainVrconndomaingroup Vrconnmodule VrconnmoduleportVrconnwwn WirelessproductdetailsVrconnserverprofile Zone WirelessproductrelationWtarchive Zonealias ZonealiasinzoneZonealiasmember ZonedbZonedbconfig ZonedbcontentZonedbusers ZONEIN-ZONESETAdapterportconfiginfo ViewsAgconnectioninfo ViewsCnaportdetailsinfo BootimagefiledetailsinfoCnaethportconfiginfo CNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS CNAETHPORT.MTU CNAPORT.ALARMWARNINGCnaportinfo Coreswitchdetailsinfo CORESWITCH.IDCORESWITCHDETAILS.DESCRIPTION Coreswitch Left Outer Join CoreswitchdetailsCryptohostluninfo Cryptolun LUN, CryptohostCRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, Cryptoswitch CryptotargetengineinfoDashboardpreferencesinfo DASHBOARD.CREATEDBYDeploymentlog DeploymentconfigurationDeploymentinfo Deviceconnectioninfo EEMONITORSTATS5MININFO EEMONITORSTATS30MININFOEEMONITORSTATS2HOURINFO EEMONITORSTATS1DAYINFOTEPORTSTATS5MININFO TEPORTSTATS30MININFOTEPORTSTATS2HOURINFO TEPORTSTATS1DAYINFOCORESWITCH.MAXVIRTUALSWITCHES SwitchinfoCORESWITCH.IPADDRESS Deviceinfo CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, FabricVIRTUALSWITCH.CORESWITCHID = CORESWITCH.ID DEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS DEVICENODE.SIMULATEDDEVICEPORT.NUMBER DEVICEPORT.PORTID DEVICENODE.FABRICID = SWITCHINFO.FABRICID N2FPORTMAP Switchport Agnport Switchport AgfportN2FPORTMAPINFO DevicenodeinfoDeviceportinfo DevicenodeDevportgigeportlinkinfo DEVICENODE.FDMIHOSTNAMEDeviceport DEVICEPORTGIGEPORTLINK.DIRECTATTACHIslinfo DevportmacaddrmapinfoIslconnectioninfo ISL.DESTPORTNUMBER DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.ID EthernetislinfoEventdetailsinfo FABRIC.ID = ISL.FABRICIDEventinfo Fabricinfo FCIPTUNNELCIRCUIT.DSCPDATA FciptunnelcircuitinfoFABRICMEMBER.FABRICID = FABRIC.ID FCIPTUNNEL.DSCPCONTROL FciptunnelinfoFciptunnelcircuit Fcoedeviceinfo FruinfoGigeportecloudlinkinfo Gigeport Switchport Coreswitch HBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATEGigeportinfo HbaportdetailsinfoHBAPORTDETAIL.PREBOOTDISABLED HBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOSHbatargetinfo HbaportHBATARGET.DEVICEPORTID HBATARGET.TRUSTEDHealthstatusinfo HBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTIDHBAREMOTEPORT.CURRENTSPEED HBAREMOTEPORT.IOLATENCYAVERAGEHostdiscoveryrequestinfo HOSTDISCOVERYREQUEST.IDHOSTDISCOVERYOPTION.VMPORT DEVICEENCLOSURE.TYPEHOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID IflinfoHostdiscoveryrequest Isltrillinfo Isltrunkgroupmemberinfo ISL.DESTDOMAINID ISL.DESTPORTNUMBERDESTDEVICE.MANAGEDELEMENTID AS Destmeid ISL Device VcsdeviceIsltrunkinfo ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHID L2NEIGHBORINFOMapseventdetailsinfo L2NEIGHBORModuleinfo TEMPMODULE.MODULEID TEMPMODULE.NUMPORTSNportwwnmapinfo MODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENTPHYSICALDEVICE.DEVICEID FOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUMPhantomportinfo ProductinfoTEMPDEVICE.FABRICWATCHSTATUS TEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESSTEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLB LastseentimestampTEMPDEVICE.FIRSTSEENTIME TOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS asPortgroupinfo PortbottleneckconfinfoPortbottleneckstatinfo Roleprivilegeinfo PortprofileinfoPortprofileinterfaceinfo PortprofilemacinfoPORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODE PortprofileSflow PortvlaninfoProtocolvlaninfo Scomeemonitorinfo SFLOWMINUTEL3VIEWSflowminutemacview SOURCEPORT.ID = EEMONITOR.SOURCEPORTID SensorinfoEemonitor Smartcardusageinfo Switchconfiginfo SwitchdetailsinfoSWITCHCONFIG, Switchconfigdetail SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGIDVIRTUALSWITCH.FMSMODE VIRTUALSWITCH.MANAGEDELEMENTID CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, CoreswitchdetailsSwitchdiscoveredmacinfo SwitchportinfoSWITCHPORT.ID DEVICE.IPADDRESS, DEVICE.DEVICEIDCORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo Timeseriesdataview TIMESERIESDATA12HOUR.MEASUREIDFrom timeseriesdatainfo tsd Union ALLTrillinfo Virtualfcoeportinfo TrilltrunkinfoUserroleresourceinfo CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.ID VIRTUALPORTWWNDETAILS.SWITCHIDVirtualportwwndetailsinfo VirtualportwwndetailsVmaddressinfo VlanintclassifierinfoDEVICE.DEVICEID VLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBIDVmconnectivityinfo MACGROUP.IDDEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.ID INTERFACE.DEVICEID = DEVICE.DEVICEIDVMPATH.HBAPORT = DEVICEPORT.WWN DEVICEENCLOSURE.ID AS HostdbidVmnetworkconnectivityinfo VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHID PnicmacVMHOSTENDDEVCONNECTIVITY.INTERFACEID DEVICE.MANAGEDELEMENTIDSwitchname VMHOST.DEVICEENCLOSUREIDVmdatastoredetailsinfo VmeemonitorinfoVmpath Vmvirtualmachine VMPATH.HBAPORTBPCHAR = SOURCEPORT.WWNVmhostinfo VmluninfoVmstatisticsinfo VMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN SWITCHPORT.PORTID SWITCHPORT.PORTNUMBERSWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOK Vrconnmoduleinfo VRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINIDVRCONNDOMAIN.FIRMWAREVERSION VCEMPROFILE.DISCOVERYSTATUSUnion Select distinct VRCONNMODULE.ID Vrconnmoduleportinfo VrconnnpivinfoUSERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS VmmdiscoveredmacinfoDEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAME Vmvirtualethernetadapterinfo ZONEDB.ID = ZONEDBCONFIG.ZONEDBID ZonedbinfoApusage EventsPhysicaldeviceinfo SflowminutebgpviewSflowminutevlanview Snmpdatainfo SlotinfoManagedelementinfo Snmpexprdatainfo SnmpdataviewWhere sw.id = sp.virtualswitchid = de.managedelementid Vmvnetworkinfo Device PHYSICALINTERFACE, PhysicalportVcsclustermemberinfo Trilltrunkgroup Resetvcslicensed$BODY$ Wirelessinterface SelectWiredinterface Ceeportinfo L3.SUBNETMASKDeviceipaddress CEEPORT.AMPPPROFILEMODECEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Ampp Access levels definedIndex EMC, 354 HP LAN, 355 IBM CNACUP, Ficon Hosts, 1011692 53-1003056-01 Gslb FiconFTP State, 102 Monitor MstpNew device, adding name NOSColumns, 284 product overview, 453 products Rbac1043 SVI 1699 Edit, 880 WWN1701