Brocade Communications Systems IP250 user manual 997

IP historical performance monitoring 33

FIGURE 403 Historical Data Collectors dialog box

All configured data collectors are listed, showing the following information:

•Name - The name of the data collector.

•Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).

NOTE

The Netiron Ether Stats Collector and NOS Ethernet Port Optics Collector will be disabled by default.

•Polling Interval - The time interval, in minutes, between attempts to contact the information source and gather data.

NOTE

The Polling Interval for NOS ethernet port optics collector is 30 minutes.

•Collectibles Type - At what level the data will be collected and the types of MIB objects used:

-Product Level - SNMP data is collected at the product (device) level.

-Port Level - SNMP data is collected at the port level.

•Source Defined - Whether or not the information source (product or port) is defined (Yes) or not configured (No).

•System Collectors - Whether or not this is a system data collector. Refer to the following sections for more information:

-“Editing system collectors” on page 996

-“Duplicating system data collectors” on page 1006

When you select a listed data collector, The following information is displayed in the Collector Details field:

•MIB Variables - The MIB variables used (if any).

•Expression - The expression used (if any).

•Source - The defined products used as information sources by this collector.

Brocade Network Advisor IP User Manual	997
53-1003056-01