Brocade Communications Systems IP250 user manual Deploying boot images to products

26 Boot image management

c.Enter the image version in the Image Version field.

d.Enter the label for the image in the either the Image Label field or the User Defined Label field.

These fields are from 1 through 32 alphanumeric characters and allow the following special characters: underscore (_), period (.), and hyphen (-).

The image file name excludes the file extension. For example, if the file name is M2B07504.bin, the Image Label is M2B07504.

Enter additional information for the image in the User Defined Label field. This entry appears under the More Information column of the Boot Images list of the Firmware Management dialog box.

e.Click OK on the Import Boot Image dialog box.

If the imported file already exists or the import operation fails for any reason, a message displays with details.

8.Click OK.

Deploying boot images to products

The Management application stores previously imported boot and monitor images from IronWare and Network OS products. These images can be placed in a boot image payload and deployed to products using the Configuration Wizard.

Deleting boot images from the Management application

If a boot or monitor image must be deleted from the Management application, complete the following steps.

1.Click the IP tab.

2.Click the Boot Images tab on the Firmware Management dialog box.

3.Select the boot image that you want to delete.

4.Click Delete.

A confirmation warning displays.

5.Click Yes to continue with the delete, or No to cancel it.

810	Brocade Network Advisor IP User Manual
	53-1003056-01