Brocade Communications Systems IP250 user manual Deploying target actions using the VLL Manager

28 VLL manager

•You can only define one dual tagged endpoint per port.

•You cannot define a dual tagged endpoint on a port if there is a 802.1ag configuration defined on the port.

c.For tagged ports only, enter a VLAN ID for the customer end point in the Inner VLAN ID field.

Packets with this VLAN ID are transmitted out the specified interface.

d.From the COS list, select a COS for the port. This field applies only to local VLLs.

5.Click Apply.

If any of the endpoints

6.Click Next.

The VLL Configuration wizard Deploy Target Actions dialog box displays (Figure 354).

FIGURE 354 VLL Configuration wizard Deploy Target Actions dialog box

Deploying target actions using the VLL Manager

1.From the Deploy Target Actions pane, under the Resultant Endpoint Actions, Endpoint Targets column, select the device, or expand the folder for the device to display the VLAN ID (if the Tagged is configured for the port’s tag mode) and the port on which the VLL is to be assigned.

2.The Actions column displays the action to take when the VLL is deployed to the devices. An action is displayed for the device, the VLAN, and the port to which the VLL will be deployed. Possible actions are:

•CREATE: Adds the configuration to the device.

•DELETE: Removes the configuration from the device.

•UPDATE: Modifies the configuration on the device if the configuration is being edited.

3.Click Next.

The VLL configuration wizard Deployment Properties dialog box displays (Figure 355).

876	Brocade Network Advisor IP User Manual
	53-1003056-01