Brocade Communications Systems IP250 user manual Configuration repository and backup management

13 Configuration repository and backup management

4.Enter your password in the Password field. The default password admin123.

5.Click Login.

The Element Manager displays.

OR

1.Select Reports > Wired Products from the main menu. The Wired Products report displays.

2.Click the IP address of a product in the IP Address column. The Element Manager displays.

Launching a Telnet session

NOTE

Wireless access points in adaptive mode do not display in the Management application.

You can use Telnet to log in and issue command line-based commands to a device.

NOTE

The device must have a valid IP address. If the device does not have a valid IP address, the Telnet selection will not be available on the Tools menu or the shortcut menu. You must right-click the device icon, select Properties, and enter the device’s IP address before you can open a Telnet session.

To launch the CLI, complete the following steps.

On the Product List or Topology Map (L2 or IP only), right-click a device and select CLI through Server.

The Telnet session window displays.

Configuration repository and backup management

NOTE

Requires Mobility 5.3 or later.

Configuration repository and backup allows you to display each product configuration, including the name of the product, the version number of the configuration, the software release the product is running, and the product type, compare configurations, and backup configurations to the management server.

Instructions for configuration repository and backup are detailed in “Configuration Repository and Backup” on page 743 and include information about the following:

•“Saving the configuration status” on page 746

•“Viewing the configuration” on page 748

•“Restoring a configuration” on page 750 (You can only restore configurations as startup.)

•“Searching the configuration repository” on page 751

418	Brocade Network Advisor IP User Manual
	53-1003056-01