Brocade Communications Systems IP250 Excluding Cidr subnet addresses, Excluding subnet addresses

IP discovery profiles 3

Excluding CIDR subnet addresses

To exclude CIDR subnet addresses (IPv4 and IPv6), complete the following steps.

1.Select CIDR Subnet from the Entry Type list.

FIGURE 24 Exclude CIDR Subnet

2.Enter the IP address in the IP Address field.

3.Enter the subnet mask bits in the Subnet Mask Bits field. For IPv4, the subnet mask bits is between 0 and 32.

For IPv6, the subnet mask bits is between 0 and 128.

4.To include an address range using the CIDR Subnet format, refer to “Adding CIDR subnet addresses” on page 67.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

Excluding subnet addresses

To exclude subnet addresses (IPv4 only), complete the following steps. 1. Select Subnet from the Entry Type list.

FIGURE 25 Exclude Subnet

2.Enter the IP address in the IP Address field.

3.Enter the subnet mask in the Subnet Mask field.

4.To include an address range using the Subnet format, refer to “Adding subnet addresses” on page 68.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

Brocade Network Advisor IP User Manual	69
53-1003056-01