Brocade Communications Systems IP250 user manual Deploying a payload configuration

24 Deploying a payload configuration

Deploying a payload configuration

Payload configurations are deployed to targets in one of the following ways:

•On a scheduled basis, if a deployment schedule has been set up for the configuration.

•On demand, if Save Without Scheduling Deployment is selected in the Deployment Schedule pane of the Configuration Wizard. Configurations can be manually deployed when required.

Refer to step 12 in “Creating a payload configuration” on page 767 for more information on setting up a deployment schedule.

Use the following procedure to deploy the configuration on demand.

1.Select Configure > Configuration Wizard.

2.Select the configuration you want to deploy from the Product Configurations list.

3.Click Deploy.

4.Click Yes in the confirmation message. The Deployment Status dialog box displays.

NOTE

If a configuration has more than one payload and a failure occurs during deployment of a payload, the Management application aborts the deployment of that payload, but continues to deploy the remaining payloads.

5.Click Close when you are finished viewing the information.

Deleting a payload configuration

1.Select Configure > Configuration Wizard.

2.Select the configuration you want to delete from the Product Configurations list.

3.Click Delete.

4.Click Yes in the confirmation message.

776	Brocade Network Advisor IP User Manual
	53-1003056-01