Brocade Communications Systems IP250 user manual Adding subnet addresses, Adding IP addresses

3 IP discovery profiles

Adding subnet addresses

To add subnet addresses (IPv4 only), complete the following steps. 1. Select Subnet from the Entry Type list.

FIGURE 22 Include Subnet

2.Enter the IP address in the IP Address field.

3.Enter the subnet mask in the Subnet Mask field.

4.To exclude an address range using the Subnet format, refer to “Excluding subnet addresses” on page 69.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

Adding IP addresses

To add an IP address range (IPv4 and IPv6), complete the following steps. 1. Select IP Address from the Entry Type list.

FIGURE 23 Include Address Range

2.Enter the first IP address in the range in the first IP Address field.

3.Enter the last IP address in the range in the second IP Address field.

4.To exclude an address range using the IP Address format, refer to “Excluding IP addresses” on page 70.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

68	Brocade Network Advisor IP User Manual
	53-1003056-01