Brocade Communications Systems IP250 Resetting optional messages, Configuring e-mail notification

User profiles 6

Resetting optional messages

To reset all Management application optional messages to their default behaviors, complete the following steps.

1.Select Server > User Profile.

The User Profile dialog box displays.

2.Click Optional Messages Reset.

The Password Policy dialog box displays.

3.Click Yes on the confirmation message. A successful reset message displays.

4.Click OK on the User Profile dialog box.

Configuring e-mail notification

To configure and enable e-mail notification, complete the following steps.

1.Select Server > User Profile.

The User Profile dialog box displays.

2.Select the E-mail Notification - Enable check box to enable e-mail notification.

3.Click Filter to set up basic event filter.

For step-by-step instructions about setting up basic event filters, refer to “Setting up basic event filtering” on page 1144.

4.Enter your e-mail, text message, or page address in the E-mail Address field.

Enter more than one e-mail address, separating each with a semi-colon. To send a text message or page via e-mail, use the following format number@carrier.com, where number is your phone number and carrier.com is the SMS server. For example, 3035551212@txt.att.net (text message) or 3035551212@page.att.net (page).

NOTE

Check with your carrier for the exact e-mail address.

5.Click OK on the User Profile dialog box.

Configuring CLI credentials

NOTE

This feature requires a Trial or Licensed version.

To configure CLI credentials, complete the following steps.

1.Select Server > User Profile.

The User Profile dialog box displays.

2.Click Configure to set up basic event filter. The CLI Credential dialog box displays.

Brocade Network Advisor IP User Manual	209
53-1003056-01