Manuals / Brocade Communications Systems / Computer Equipment / Network Hardware

Brocade Communications Systems IP250 user manual Viewing Call Home status

Models: IP250

1 1753

Download 1753 pages 4.1 Kb

Page 410

10 Viewing Call Home status

Viewing Call Home status

You can view Call Home status from the main Management application window or from the Call Home Notification dialog box.

The Management application enables you to view the Call Home status at a glance by providing a Call Home status icon on the status bar. Table 37 illustrates and describes the icons that indicate the current status of the Call Home function.

TABLE 37 Call Home icons

IconDescription

Normal — Displays when Call Home is enabled on all devices and no filters are applied.

Degraded — Displays when Call Home is enabled on all devices and at least one filter is active.

Disabled — Displays when any of the following conditions are met:

•At least one device's Call Home is disabled.

•At least one non-manageable device.

•At least one device does not have the Management server registered as a trap recipient.

To view more detail regarding Call Home status, click the Call Home icon. The Call Home Notification dialog box displays the following information for the list of devices that have assigned filters or Call Home disabled:

•Product — The name of the device. Click to go to the device in the topology.

•IP Address — The IP address (IPv4 or IPv6 format) of the device.

•Status — The status of the device. The possible status options include:

-Enabled — The device is manageable, Call Home is enabled, and a filter is applied.

-Disabled — Call Home is disabled on at least one device or Call Home is disabled from the Call Home dialog box.

-Not Manageable — Manageability is lost.

-Server Not Registered — The server is not registered to receive Call Home events from this device.

NOTE

Call Home status only displays for Fabric OS, IronWare, and Network OS products.

•Filter — The name of the active event filter assigned to the device.

•Call Home button — Click to launch the Call Home dialog box, where you can configure Call Home centers.

358	Brocade Network Advisor IP User Manual
	53-1003056-01

Image 410

Brocade Communications Systems IP250 user manual Viewing Call Home status

Contents

Brocade Network Advisor Brocade Communications Systems, Incorporated Title Publication number Summary of changes DateTitle Publication number Summary of changes Date 53-1003056-01 Contents Installing a patch Uninstalling a patch Chapter DiscoveryVii Displaying Network Object view Configurable preferencesManagement groups overview 111181 Viewing configured usersUsers overview 182Dashboard overview Accessing a dashboardSetting the dashboard display Dashboard toolbar53-1003056-01 Product List toolbar IP tab overviewIP main toolbar Host Product List toolbarSystem requirements Viewing Call Home configurationsCall Home overview 344Launching a Telnet session About third-party toolsStarting third-party tools from the application Launching an Telnet session from the IP tabServer Management Console overview Wireless management overviewWireless devices Launching the SMC on WindowsVCS VCS mode typesLogical chassis cluster mode discovery Ethernet Fabrics view managementHost Bus Adapters Host managementBrocade adapters Converged Network AdaptersThis chapter 481Policy-based routing Adding policies from saved configurationsTelemetry overview Viewing existing PBR policiesFabric OS Layer 2 ACL configuration Layer 2 access control list managementIronWare Layer 2 ACL configuration Creating a Layer 2 ACL from a saved configurationOnline zoning Scheduling a security configuration deploymentZoning overview Offline zoningChapter Port Fencing 671Chapter IP Element Manager 723743 765778 CLI configuration overview777 807Configuration requirements for Vlan Manager Default VlanRemote Switched Port Analyzer Adding or modifying dual mode portsMpls pre-configuration 843917 VIP Servers overviewVIP Server functions Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management This chapter 1213 Configuring packet captures Chapter Technical SupportReports Product status events Dashboard main menus 1261 IP main menus IP shortcut menusLink incident events 12771371 This appendixDatabase tables and fields Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo How this document is organized About This DocumentThis chapter Xliv 53-1003056-01 Supported hardware and software Fabric OS hardware and software supportIronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Key terms Document conventionsText formatting Bold textOther industry resources Additional informationBrocade resources These references are made for informational purposes onlyGetting technical help Document feedbackGetting Started User interface componentsManagement server and client Logging into a server Management server and clientLaunching a remote client Clearing previous versions of the remote clientLaunching the Configuration Wizard 53-1003056-01 53-1003056-01 Active Sessions dialog box displays Figure Viewing active sessionsSelect Server Active Sessions To disconnect a user, complete the following steps Disconnecting usersViewing server properties Select Server Server PropertiesClick Close to close the Server Properties dialog box Viewing port statusManagement server and client Server Properties Field/Component DescriptionServer and client ports TCP Tftp UDP4431,2 Https server Json Keyboard shortcuts Accessibility features for the Management applicationAccessibility features for the Management application Menu Item or Function Keyboard ShortcutSelect Server Options Setting the look and feelLook and feel customization Options dialog box displaysChanging the font size Connecting to the database using pgAdminPostgreSQL database PostgreSQL database Selecting File Add ServerLinux version RedHat Package Manager file Odbc Data Source Administrator dialog box displaysClick the System DSN tab Click Add SuseAdding the Datasourse on Linux systems Installing the Odbc driver on Linux systemsOn the Setup psqlODBC screen click Next Save and close the odbcinst.ini fileOn the Select database screen, complete the following steps Testing the connection on Linux systemsExecuting SQL queries from the CLI Select the Connect to an existing database optionOpen Source Software License Type Changing the database user passwordSupported open source software products Lgpl HP Software Development KIT License AgreementIreasoning BSDOpen Source Software License Type Supported open source software products Execute the patch file for your operating system Installing a patchPatches Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview53-1003056-01 MIB support Configuration requirementsDiscovery of IPv6 addresses Ietf standard MIB name Required MIB object Data collectedBRIDGE-MIB MIB-IIIF-MIB Ietf standard MIB name Required MIB object Data collected IP-MIB VDX/VCS discoveryENTITY-MIB Mapping VCS in-band management Network OS discovery IP address formatVCS in-band management interface discovery 1000000533516242VCS fabric rediscovery Standalone discoveryVCS fabric discovery Select File SaveNetwork OS 2.0 device limitations Seed switch failoverVCS fabric split and merge Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change HyperEdge stack discovery Configuring IP profile discoveryDiscover Setup IP dialog box displays HyperEdge stack discoveryConfiguring IP profile discovery Click the Global Settings tabIP Snmp credentials Configuring IP simple discoveryConfiguring IP simple discovery Adding SNMPv1 and SNMPv2c credentialsIP Snmp credentials Click the Snmp tabCBC-DES Adding SNMPv3 credentialsHMACMD5 Hmacsha Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Reordering Snmp credentials in the list Deleting Snmp credentials from the listDefault IP user credentials Adding user credentialsDefault IP user credentials 53-1003056-01 Editing login prompt user credentials Editing enable prompt user credentialsEditing enable super user credentials To edit an enable super user, complete the following stepsReordering user credentials in the list Deleting user credentials from the listIP Object identifier filters IP Object identifier filtersIncluding product types Click the OID Filter tabExcluding product types Product sysObjectID VendorDeleting product types from the list Defining global setting preferencesDefining global setting preferences Click the Preferences tab53-1003056-01 Configuring event-based collection Reduce the managed count by completing the following steps53-1003056-01 IP discovery profiles Configuring a discovery profileIP discovery profiles Duplicating a discovery profile Configuring address ranges Adding Cidr subnet addresses Select Cidr Subnet from the Entry Type listAdding subnet addresses Adding IP addressesExcluding Cidr subnet addresses Excluding subnet addressesEditing address ranges Excluding IP addressesEditing IP addresses Editing Cidr subnet addressesEditing subnet addresses Scheduling discovery Configuring a one-time discovery schedule Configuring an hourly discovery scheduleConfiguring a daily discovery schedule Configuring a weekly discovery scheduleConfiguring a monthly discovery schedule Configuring a yearly discovery scheduleTo edit a discovery schedule, complete the following steps Suspending a discovery scheduleEditing a discovery schedule Editing a daily discovery schedule Editing a one-time discovery scheduleEditing an hourly discovery schedule Editing a weekly discovery scheduleEditing a yearly discovery schedule Configuring advanced discovery profile preferencesEditing a monthly discovery schedule IP discovery profiles Starting discovery manually Deleting a discovery profileCreating a discovery address file Viewing discovery status Starting discovery automaticallyStopping discovery To view discovery status, complete the following stepsViewing discovery reports Mailing discovery reportsClick Discovery Log Exporting discovery reportsViewing the discovery log Individual IP device discovery Individual IP device discoveryAdding an IP device to discovery HMACMD5 Click the SNMPv3 Read Only tab Click the SNMPv1/v2c Read/Write tabClick the Read/Write Credentials tab Editing IP device discoveryClick the SNMPv1/v2c Read Only tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Discovering Hosts by Network address or host name Host discoveryDeleting IP devices from discovery Select Discover Host AdaptersHost discovery Importing Hosts from a CSV file Click Close on the Discover Host Adapters dialog boxHost discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery Editing Host adapter credentials To edit Host credentials, complete the following stepsDeleting a host adapter from discovery Removing a host from active discoveryRediscovering a previously discovered fabric Click DiscoverIconDescription Troubleshooting host discoveryViewing the host discovery state Discovering a VM manager VM Manager discoveryVM Manager discovery requirements Select Discover VM ManagersClear to disable vSphere client plug-in registration VM Manager discoveryTo edit VM manager discovery, complete the following steps Editing a VM managerClick Close on the Discover VM Managers dialog box Removing a VM manager from active discovery Excluding a host from VM manager discoveryIncluding a host in VM manager discovery Rediscovering a previously discovered VM managerDeleting a VM manager from discovery Viewing the VM manager discovery stateRediscovering IP devices Troubleshooting VM manager discoveryIP Rediscovery Rediscovering IP devices from the Product List Click RediscoverEnabling password validation on rediscovery Rediscovering a groupDisplaying Network Object view Management GroupsManagement groups overview Product group overview Static product groups Creating a static product groupEditing a static product group Product group overviewDuplicating a static product group Dynamic product groups Creating a dynamic product groupUserdefinedproperty1 up to Select Value or Regular Expression from the Type list Editing a dynamic product group Duplicating a dynamic product groupProduct Group Properties dialog box displays Viewing product group propertiesViewing test results Products tab Click OK to close the dialog boxProperties tab Performance listCreating a port group Port GroupsDeleting a product group Port GroupsEditing a port group Duplicating a port group Viewing port group properties Ports tabDeleting a port group Application Configuration Configurable preferencesServer Data backup Configuring backup What is backed up?Management server backup Select Server Backup in the Category list130 53-1003056-01 Enabling backup Changing the backup interval Disabling backupViewing the backup status Clear the Enable Backup check box Click Apply or OKSelect Server Backup in the Category list Click Backup Now Starting immediate backupReviewing backup events Server Data restore Restoring dataSAN data collection Restoring data to a new server136 53-1003056-01 Snmp Product communication protocolsIcmp Netconf FTPEvent storage settings Product communication protocols Event storage settingsConfiguring event storage To configure event storage, complete the following stepsStoring historical events purged from repository Flyover settingsConfiguring flyovers Select Event Storage in the Category listProperties table Options dialog box Flyovers pane, Connection tabViewing flyovers Name settingsTurning flyovers on or off Click Fix Duplicates Select Configure NamesFixing duplicate names Viewing names Name settings Select one of the following optionsConfigure Names dialog box displays Figure Adding a name to an existing device Click Apply Names Adding a name to a new deviceApplying a name to a detached WWN Exporting names Removing a name from a deviceEditing names Click ExportTo import names, complete the following steps Importing NamesSearching for a device by name Click ImportMiscellaneous security settings Searching for a device by WWNSelect Security Misc in the Category list Configuring the server nameConfiguring login security Disabling the login banner Syslog Registration settingsConfiguring the login banner display Registering a server as a Syslog recipient automaticallyRegistering a server as a Snmp trap recipient automatically Snmp Trap Registration settingsConfiguring the Syslog listing port number Configuring Snmp v1 and v2c credentials Snmp Trap forwarding credential settingsConfiguring the Snmp trap listing port number Snmp Trap forwarding credential settingsConfiguring Snmp v3 credentials Client/Server IP Software ConfigurationConfiguring the server IP address 156 53-1003056-01 Configuring an explicit server IP address Configuring the application to use dual network cards Click OK on the Login BannerIP preferences Software ConfigurationYou can configure the following preferences for IP products Configuring change manager preferences Configuring deployment report preferences Configuring custom report preferencesConfiguring deployment preferences Configuring Mpls management preferences Configuring IP device manager preferencesConfiguring image repository preferences Configuring Mpls polling service preferencesConfiguring sFlow accounting preferences Configuring name service preferencesConfiguring polling service preferences Configuring sFlow data collector preferencesConfiguring sFlow monitoring preferences Configuring SSL certificates preferencesConfiguring Tftp preferences Configuring Snmp preferencesConfiguring syslog file reader preferences Memory allocation settings Configuring memory allocation settingsServer Heap Size Configuring asset polling Viewing the network size status Product communication settingsConfiguring SAN communication Select the Connect using Https Http over SSL only option Configuring the preferred IP formatSelect the Connect using Http option Configuring IP communication FTP/SCP/SFTP server settings HttpAccessing the FTP server folder Configuring an internal FTP serverConfiguring an internal SCP or Sftp server Configuring an external FTP, SCP, or Sftp server Select the Use External FTP Server and/or SCP Server optionSelect Sftp from the Preferred Protocol Secured list Testing the FTP, SCP, and Sftp serverSelect SCP from the Preferred Protocol Secured list Select FTP/SCP/SFTP in the Category listTo configure server settings, complete the following steps Server port settingsConfiguring the server port Select Support Mode in the Category list Support mode settingsConfiguring support mode settings Options dialog box displays FigureConfiguring the server log file purge limit Fips Support User Account Management Users overviewSelect Server Users Viewing configured usersTo view configured users, complete the following steps Users dialog box displays Click the Users tab, if necessary183 184 53-1003056-01 User accounts User accountsCreating a new user account To create a new user account, complete the following steps186 53-1003056-01 Editing a user account Copying a user accountCopying and pasting user preferences Disabling a user account Unlocking a user account Enabling a user accountDeleting a user account To re-activate a user account, complete the following stepsRoles RolesCreating a new role To create a new role, complete the following stepsEditing a role Copying a roleTo delete a role, complete the following steps Deleting a roleAdding privileges to a role Areas of responsibility Areas of responsibilityRemoving privileges from a role Creating an AOR Editing an AOR Copying an AORDeleting an AOR Assigning products to an AORRemoving products from an AOR Password policiesConfiguring a password policy Users dialog box displays Click the Policy tab199 Viewing password policy violators Assigning roles and AORs to an AD group Authentication Server Groups on the Management serverClick the Authentication Server Groups tab Click View Policy ViolatorsTo load an AD group, complete the following steps Removing roles and AORs from an AD groupLoading an AD group Open the Active Directory Users and Computers console Deleting an AD groupCreating an AD user account Close the Active Directory Users and Computers dialog boxDefining user accounts on the external Ldap server Configuring roles and AORs on the external Ldap serverAssigning an AD user to an AD group Select Start Run Type adsiedit.msc and press Enter User profilesClick OK Close the Management console Select Server User Profile User profiles Configure CLI credentialsViewing your user profile Click OK on the User Profile dialog boxUser profiles Changing your passwordEditing your user profile To edit your user profile, complete the following stepsViewing your password policy To view your password policy, complete the following stepsConfiguring CLI credentials Resetting optional messagesConfiguring e-mail notification Click Optional Messages ResetConfiguring the CLI credential policy Dashboard Management Dashboard overview212 53-1003056-01 Dashboard toolbar ToolbarDashboard messages Dashboards expand navigation barAccessing a dashboard General dashboard functionsFiltering the dashboards list Creating a user-defined dashboardCustomizing the dashboard widgets and monitors Setting the dashboard displayDeleting a user-defined dashboard 218 53-1003056-01 Attaching and detaching the Dashboard tab Exporting the dashboard displayPrinting the dashboard display Setting the network scope Creating a customized network scope Deleting a user-defined network scope Setting the data display time frameEditing a user-defined network scope IP Port Health Default dashboardsProduct Status and Traffic dashboard Status widgets Access Point Status widgetStatus widgets Customizing the Access Point Status widget Color TypeEvents widget ColorSeverityAccessing additional data from the Events widget Customizing the Events widgetHost Adapter Inventory widget Customizing the Host Adapter Inventory widgetIP Inventory widget Accessing additional data from the IP Inventory widget Customizing the IP Inventory widgetIP Status widget displays the device status as a pie chart IP Status widgetAccessing additional data from the IP Status widget Viewing additional IP product dataFabric Watch widgets Fabric Watch widgetsStatus widget Out of Range Violations widget Port Health Violations widget Customizing the Out of Range Violations widgetCustomizing the Port Health Violations widget Monitor title Description Data collectors Accessing additional data from the widgetPerformance monitors Click the Customize Dashboard icon Performance monitors Preconfigure performance monitorsDisplaying monitors on the Performance Dashboard Performance monitors Click OK Top Port Alignment Errors monitorAccessing additional data from top or bottom port monitors Top Port C3 Discards monitor Performance monitorsTop Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Top Port Encode Error Out monitor Accessing additional data from the Top Port Discards monitorTop Port Errors monitor Top Port Errors monitorAccessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Runtime Errors monitor Top Port Receive EOF monitorTop Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Top Port Underflow Errors monitor Accessing additional data from the Top Port Traffic monitorTop Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor Measures User-defined performance monitorsMonitor types Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors User-defined performance monitors Port measures typesAccessing additional data from the Distribution monitors Time series performance monitorsTop sFlows performance monitors Configuring a user-defined product performance monitorAccessing additional data from the sFlow monitors Add Performance Dashboard Monitor dialog box displays271 Adding targets to a user-defined performance monitor Click OK on the Add Performance Dashboard Monitor dialog boxConfiguring a user-defined port performance monitor Performance Dashboard Monitor Targets dialog box displays274 53-1003056-01 Configuring a user-defined sFlow performance monitor MAC VlanViewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph View Management Utilization LegendIP tab overview IP main toolbar Main toolbarProduct List toolbar Host Product List toolbar Topology Map toolbarHost topology map toolbar IP Product ListTopology Map Product List functions286 53-1003056-01 Keyboard Shortcut Description Master LogIP tab overview Topology keyboard shortcuts Minimap Anchoring or floating the MinimapStatus bar Resizing the MinimapIcon legend IP product iconsVlan Host product iconsIcon legend CNAIP product status icons IP group iconsIP port icons Event iconsZooming Customizing the main windowZooming in and out of the Connectivity Map Customizing the main windowZooming out Exporting the topologyCustomizing application tables Displaying columnsChanging the order of columns Copying table information Resizing the columnsSorting table information Exporting table informationSearching for information in a table Product List customizationAdding a property label Expanding and collapsing tablesEditing a property label Deleting a property labelSearch Searching for a deviceRestricting a search by node Clearing search results Address FinderSearching for an exact match Address FinderAddress Finder dialog box displays Finding IP addressesSelect Tools Address Finder 303 Finding MAC addresses 305 IP topology view manager Network Objects view Network Object view functionsNetwork Objects view Filtering devices in the Network Objects Product ListClearing the Network Objects Product List filter IP Topology view IP Topology viewL2 Topology view STP/RSTP topology Ethernet Fabrics viewVlan Topology view Ethernet Fabrics viewViewing STP/RSTP topology ElementDescriptionVlan Topology view STP/RSTP Topology map elements Generating an STP/RSTP ReportExporting an STP/RSTP Report Element DescriptionHost Topology view Click Save Host Topology viewMailing an STP/RSTP Report 314 53-1003056-01 IP topology map components IP topology map componentsTopology map elements Connections Icon Description ProductsLogical Viewing flyovers on the topology map Topology map layoutOrganic OrthogonalOrthogonal Merge Lines HierarchicalFree Form Selecting a topology map layoutCircular Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Deleting a background image from the library Click OK on the Topology Background Map dialog boxPrinting a map Select Portrait or Landscape from the Orientation areaPort actions Enabling port actionsPort actions Disabling port actionsDisplaying port properties for an attached device Accessing performance monitoring 330 53-1003056-01 MRP Topology MRP Topology overviewViewing a MRP Topology map Viewing a MRP ring MasterError Viewing a MRP ring MRP Topology map elementsConfiguring the application to show a dashed line Selecting a topology map layout336 53-1003056-01 337 Creating a customized layout Enter the ring ID, for example, Ring Customizing the MRP Topology mapClick the Starting Point row Click Close on the MRP Topology Options dialog box Refreshing MRP Topology dataViewing MRP properties 341 Viewing MRP properties Call Home Call Home Viewing Call Home configurations System requirements346 347 Showing a Call Home center Showing a Call Home centerHiding a Call Home center To show a Call Home center, complete the following stepsClick Edit Centers beneath the Call Home Centers list Editing a Call Home centerEditing the IBM Call Home center Primary Connection field Backup Connection fieldEditing an e-mail Call Home center Click Edit Centers beneath the Call Home Centers tableEnter a user name in the Smtp Server Settings Username field Enter a password in the Smtp Server Settings Password fieldCall Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center Enabling supportSave To enable a Call Home center, complete the following stepsEnabling a Call Home center Disabling a Call Home center Testing the Call Home center connectionTesting the Call Home center connection Select Monitor Event Notification Call HomeViewing Call Home status Viewing Call Home statusRemoving all devices and filters from a Call Home center Assigning a device to the Call Home centerRemoving a device from a Call Home center Assigning a device to the Call Home centerClick OK on the Call Home Event Filter dialog box Defining an event filterTo define an event filter, complete the following steps Assigning an event filter to a Call Home center Assigning an event filter to a Call Home centerAssigning an event filter to a device Overwriting an assigned event filter Overwriting an assigned event filterRemoving all event filter from a Call Home center Removing an event filter from a device Removing an event filter from a deviceSearching for an assigned event filter Searching for an assigned event filter Starting third-party tools from the application Third-party toolsAbout third-party tools Launching an Telnet session from the IP tab Launching a Telnet sessionLaunching an Element Manager Select Tools Product Menu ToolNameLaunching HCM Agent Select Configure Element Manager HCM. HCM Agent displaysSelect Tools Setup Adding a toolEntering the server IP address of a tool Adding an option to the Tools menu Changing an option on the Tools menu Removing an option from the Tools menuAdding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Launching the SMC on Windows Server Management ConsoleServer Management Console overview Services tab Services tabMonitoring and managing Management application services Launching the SMC on LinuxRefreshing the server status Stopping all servicesStopping the Cimom services Click Stop CimomChanging the database password Starting all servicesRestarting all services Click Change Database PasswordPorts tab Viewing server port numbersAAA Settings tab AAA Settings tabConfiguring Radius server authentication Select Radius Server from the Primary Authentication listConfiguring a Radius server Local DatabaseConfiguring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server Configuring TACACS+ server authentication For Primary Authentication, select TACACS+ ServerConfiguring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list Configuring switch authentication For Primary Authentication, select SwitchConfiguring Windows authentication For Primary Authentication, select Windows DomainFor Primary Authentication, select Local Database Configuring local database authenticationDisplaying the client authentication audit trail Authentication Audit Trail log displaysRestoring the database Restore tabTechnical Support Information tab Capturing technical support informationUpgrading HCM on the Management server HCM Upgrade tabTo upgrade HCM, complete the following steps SMI Agent Configuration Tool SMI Agent Configuration Tool Select the HCM Upgrade tabManagement Console dialog box Launching the Smia configuration tool on WindowsSMI Agent Configuration Tool Launching the Smia configuration tool on Unix Smia Configuration Tool dialog boxSmia Configuration Tool dialog box displays Launching a remote Smia configuration toolService Location Protocol SLP support Slptool commands SLP on Unix systems SLP file locations on Unix systemsSLP on Windows systems SLP file locations on Windows systemsAuthentication tab Home tabClick the Authentication tab Authentication tabConfiguring Cimom server authentication Configuring the SMI Agent port number Cimom tabConfiguring the Cimom Bind Network Address Configuring the Cimom log Click the Certificate Management tab Certificate Management tabTo import a certificate, complete the following steps Viewing a certificate Exporting a certificateSummary tab Deleting a certificateSMI Agent Configuration Tool Click the Summary tab Licensed Ports Log LevelManaged Ports 412 53-1003056-01 Wireless Management Wireless management overviewDevice Name Firmware required Wireless devicesWireless device discovery Wireless devices on the dashboard Wireless devices on the dashboardElement Manager Wireless device propertiesView management View managementBrowser and system requirements Launching the Element ManagerConfiguration repository and backup management Launching a Telnet sessionCLI configuration management Save and close the fileCluster mode Vlan managementPolicy Monitors Fault managementPerformance management AP Products report Location StatusFirmware version Contact424 53-1003056-01 VCS Management VCSVCS mode types Fabric cluster modeEthernet Fabrics view management Logical chassis cluster mode discoveryLogical chassis cluster operations This section contains these topics428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Support for Network OS VDX 2740 embedded switch Network OSStatic product group VCS product groupsPort profiles Dynamic product groupPort profile Vlan profile QoS profile Ampp characteristicsLife of a port profile Ampp events and behavior Ampp event Applicable behavior and failuresPort profile configuration using the management application Assigning MAC addresses to a port profileClick Add Assign MACs dialog box displays Managing offline MAC addressesRelated topics Click Add Offline MACsComparing port profiles Profile Comparison Summary dialog box Profile Properties Vlan SettingsProfile Comparison Summary list FCoE Settings QoS SettingsACL Settings Deploying port profilesSystem Monitor support on Network OS VDX platforms FRU monitoringResource monitoring System thresholdsAlert notifications Port statistics monitoring SFP parameter monitoringSecurity monitoring SFP parameter Description Suggested SFP impactInterface error types Tracing Ethernet fabric routes Select Monitor Diagnostics TracerouteEthernet fabric traceroute To diagnose traceroute, you can do either of the followingSource address format Condition TCP UDP Ethernet fabric traceroute Trace Route example Request Source port number Destination port numberExporting diagnostic data Browse to the directory where you want to save the data450 53-1003056-01 Host Management Host managementFollowing sections describe the three Brocade adapter types Brocade adaptersHost Bus Adapters Model number DescriptionConverged Network Adapters Fabric AdaptersHCM software HCM softwareAnyIOTM technology HCM features Adding a VM Manager Host adapter discoveryVM Manager Click Add on the Discover VM Managers dialog boxESXi CIM listener ports HCM and Management application support on ESXi systemsDeleting a VM Manager Adding host adapter credentials for ESXi Add Host Adapters dialog boxAdapter software Select Host Adapter Software from the Configure menuAdapter software Select CIM server ESXi only as the Contact optionDriver repository Importing a driver into the repositoryBoot image repository Deleting a driver file from the repositoryImporting a boot image into the repository Boot Image Management dialog boxDownloading a boot image to a selected host Click Import on the Boot Image Repository dialog boxDeleting a boot image from the repository Bulk port configurationConfiguring host adapter ports Backing up boot image filesClick Add on the Configure Host Adapter Ports dialog box Adding a port configurationBulk port configuration Add Port Configuration dialog box, shown in , displays466 53-1003056-01 Adapter Port Configuration Status dialog box displays Duplicating a port configuration Configuring FAWWNs on switch portsEditing a port configuration Deleting a port configurationSelect Configure Fabric Assigned WWN. or Enabling the Fawwn feature on a switch or AG portsDisabling the Fawwn feature on a switch or AG ports Click Start to save the changes to the switchModifying a Fawwn on a switch or AG port Auto-assigning a Fawwn to a switch or AG portManually assigning a Fawwn to a switch or AG port Deleting a Fawwn from a switch or AG port FAWWNs on attached AG portsDeleting AG port FAWWNs Moving an AG port Fawwn across switchesAdding AG port FAWWNs Click the Attached AG Ports tabRole-based access control Role-based access controlHost adapter administrator privileges Host adapter management privilegesHost performance management FC port measures HBA port measures CNA port measuresHost security authentication Host security authentication CountersHost security authentication Adapter events Host fault managementSupportSave on adapters Syslog forwarding Host fault managementFiltering event notifications Select the Include FTP Root directory check box Backup supportConfiguring backup to a hard drive Select the Enable Backup check box Click Apply or OK Fibre Channel over Ethernet FCoE overviewDcbx protocol Enhanced Ethernet featuresEnhanced Ethernet features Enhanced Transmission SelectionEthernet link layer protocols supported FCoE protocols supportedEthernet jumbo frames FCoE protocolsFCoE licensing Saving running configurationsCopying switch configurations to selected switches Saving running configurations DCB configuration management Device type Configuration possibilitiesDCB map and Traffic Class map Switch policiesSwitch policies Lldp profilesDCB configuration DCB configurationMinimum DCB configuration for FCoE traffic Select Configure DCB Creating a DCB map to carry the LAN and SAN trafficConfiguring Lldp To configure LLDP, complete the following stepsTo configure the DCB interface, complete the following steps Creating the FCoE Vlan to carry FCoE traffic Select Assign the Global ConfigurationSelect Configure Element Manager Admin Apply the Vlan classifier group to the DCB interface Save the running-config file to the startup-config fileAdding a LAG Add LAG or Edit LAG dialog box displays, as shown in Figure L2 Mode Select Access or TrunkClick Add LAG or Edit LAG Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG QoS configuration Deleting a LAGOff Strict priority No bandwidth % configuration AllowedCreating a DCB map Priority group ID503 Editing a DCB map Deleting a DCB mapQoS configuration Assigning a DCB map to a port or link aggregation groupSelect Traffic Class from the Map Type list Creating a Traffic Class mapEditing a Traffic Class map Deleting a Traffic Class map FCoE provisioning Changing the Vlan ID on the default FCoE mapFCoE provisioning Select Traffic Class in the Map Type listEnabling or disabling the FCoE map on the port Vlan classifier configuration Adding a Vlan classifier ruleVlan classifier configuration Editing a Vlan classifier rule Deleting a Vlan classifier ruleCreating a Vlan classifier group Deleting a Vlan classifier groupLLDP-DCBX configuration LLDP-DCBX configurationConfiguring Lldp for FCoE 515 Editing an Lldp profile Deleting an Lldp profileAssigning an Lldp profile to a port or ports in a LAG 802.1x authentication802.1x authentication Setting 802.1x parameters for a port Enabling 802.1x authenticationDisabling 802.1x authentication 16 802.1x authentication519 Switch, port, and LAG deployment Switch, port, and LAG deploymentDeploying DCB product, port, and LAG configurations Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Supported VCS platforms Viewing switches in VCS modeNetwork OS switches in VCS mode Viewing QoS parameters on the Network OS switch Viewing FCoE parameters on the Network OS switchVlan Classifiers Viewing LLDP-DCBX parameters on the Network OS switchAvailable Rules Lldp Profiles listViewing port parameters on the Network OS switch port Viewing ports in VCS modeViewing the 802.1x parameter on the Network OS switch QoS-DCB Viewing QoS parameters on the Network OS switch portQoS DCB parameters on the Network OS switch port QoS Non-DCB Viewing FCoE parameters on the Network OS switch portQoS non-DCB parameters on the Network OS switch port Viewing LLDP-DCBX parameters on the Network OS switch port Viewing the 802.1x parameter on the Network OS switch portRe-authentication Interval sec Viewing LAGs in VCS modeViewing LAG parameters on the Network OS switch LAG Port ControlType Viewing QoS parameters on the Network OS switch LAGQoS DCB parameters on the Network OS switch LAG Minimum LinksViewing FCoE parameters on the Network OS switch LAG QoS non-DCB parameters on the Network OS switch LAGViewing LLDP-DCBX parameters on the Network OS switch LAG Enable LLDP-DCBX check boxGenerating a real-time performance graph from the SAN tab DCB performanceReal-time performance graph DCB performanceGenerating a historical performance graph Historical performance graphGenerating a real-time performance graph from the IP tab Generating a historical performance report FCoE login groupsHistorical performance report Historical Performance Graph dialog box displays539 Adding an FCoE login group FCoE login groupsFCoE Login Group Confirmation and Status dialog displays Editing an FCoE login groupFCoE login groups Click OK Select a group from the Login Groups list and click Delete Deleting one or more FCoE login groupsDisabling the FCoE login management feature on a switch Virtual FCoE port configuration Virtual FCoE port configurationEnabling the FCoE login management feature on a switch Viewing virtual FCoE portsVirtual FCoE Ports tab displays, as shown in Figure Clearing a stale entrySelect the Virtual FCoE Ports tab 545 546 53-1003056-01 Policy-based routing TelemetryTelemetry overview Viewing existing PBR policies 549 Adding a new policy Adding rules to a policy551 Editing a rule Adding policies from saved configurationsEditing a policy Deleting a policy or rule Deploying a PBR policy on demandSelect Save deployment only Saving a PBR policy deploymentClick OK on the Deploy to Products PBR dialog box Scheduling a PBR policy deployment Configuring a one-time deployment schedule Configuring an hourly deployment scheduleConfiguring a monthly deployment schedule Configuring a daily deployment scheduleConfiguring a weekly deployment schedule ACL Accounting Resetting ACL countersConfigure Security ACL Accounting Enabling or disabling ACL accountingPort Selection Layer 2/3 ACL dialog box displays Viewing ACL countersSelect the Clear all counters on device check box Click OK on the Port Selection Layer 2/3 ACL dialog box560 53-1003056-01 Security overview Layer 2 access control list managementSecurity Management Add Layer 2 ACL Configuration dialog box displays IronWare Layer 2 ACL configurationCreating a Layer 2 ACL configuration IronWare MAC Editing a Layer 2 ACL configuration IronWare Click OK on the Add Layer 2 ACL Configuration dialog boxCopying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Clearing Layer 2 ACL assignments IronWare Select the Clear ACL Assignment optionDeviceName Layer 2 ACL Configuration dialog box displays Fabric OS Layer 2 ACL configurationCreating a standard Layer 2 ACL configuration Fabric OS Click OK on the Edit Layer 2 ACL Configuration dialog box Editing a standard Layer 2 ACL configuration Fabric OSCopying a standard Layer 2 ACL configuration Fabric OS Creating an extended Layer 2 ACL configuration Fabric OS Select Extended from the Type list572 53-1003056-01 Editing an extended Layer 2 ACL configuration Fabric OS Copying an extended Layer 2 ACL configuration Fabric OS574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Deleting a Layer 2 ACL configuration from the switch Creating a Layer 2 ACL from a saved configurationDeleting a Layer 2 ACL configuration from the application Network OS Layer 2 ACL configuration Viewing Layer 2 ACL configuration on a fabric Network OSViewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Layer 3 access control list policy Click OK on the Port Selection Layer 2 ACL dialog boxCreating a standard L3 ACL configuration Layer 3 access control list policy Add L3 ACL Configuration dialog box displaysCreating a L3 ACL from a saved configuration Click OK on the Add L3 ACL Configuration dialog boxClick OK on the Edit L3 ACL Configuration dialog box Editing a standard L3 ACL configurationEdit L3 ACL Configuration dialog box displays Click OK on the Duplicate L3 ACL Configuration dialog box Copying a standard L3 ACL configurationCreating an extended L3 ACL configuration Click Duplicate586 53-1003056-01 Editing an extended L3 ACL configuration L3 ACL Advanced Settings dialog box displaysCopying an extended L3 ACL configuration 589 Creating an IPv6 L3 ACL configuration Add L3 ACL IPv6 Configuration dialog box displaysClick OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Click OK on the DeviceName L3 ACL Configuration dialog box Deleting a L3 ACL configurationAssigning a L3 ACL configuration to an interface 595 Clearing L3 ACL assignments Configuring the ACL configuration type and operations Configuring hit statisticsConfiguring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded To view all existing networks, complete the following steps Network configurationViewing existing networks Layer 3 access control list policy Click the Networks tab Creating a networkEditing a network Copying a network Deleting a networkNetwork group configuration Viewing existing network groupsTo create a network group, complete the following steps Creating a network groupReview the List of Network Groups table Click the Network Groups tabEditing a network group To edit a network group, complete the following stepsCopying a network group To copy a network group, complete the following stepsClick OK on the Duplicate Network Group dialog box To delete a network group, complete the following steps Service configurationDeleting a network group Viewing existing services Creating a service TCP UDPEditing a service Copying a serviceDeleting a service Click the Service Groups tab Service group configurationViewing existing service groups Review the List of Service Groups tableClick Add Add Service Group dialog box displays Creating a service groupTo create a service group, complete the following steps Editing a service group To edit a service, complete the following stepsClick OK on the Duplicate Service Group dialog box Copying a service groupTo copy a service, complete the following steps Media Access Control MAC filter management Media Access Control MAC filter managementDeleting a service group Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Click OK on the MAC Filter Saved Configurations dialog box Editing a MAC filterCopying a MAC filter 626 53-1003056-01 Deleting a MAC filter Assigning MAC filtersAdding a MAC filter configuration to an interface Clearing MAC filter assignmentsSecurity configuration deployment Security configuration deploymentDeploying a security configuration on demand Saving a security configuration deployment Click OK on the Deploy to Products Layer 2 ACL dialog boxScheduling a security configuration deployment Deploy to Product/Ports dialog boxEdit Layer 2 ACL Configuration dialog box displays Select an ACL in the list and click Edit634 53-1003056-01 635 636 53-1003056-01 Zoning Zoning overviewOnline zoning Green ZoneOffline zoning Zoning naming conventionsZone database size Zoning configurationConfiguring zoning Zone database sizeClick New Zone Creating a zoneViewing zone properties Adding members to a zone Zoning configurationSelect Save to Switch from the Zone DB Operation list Click New Member Creating a member in a zoneRemoving a member from a zone Renaming a zone Deleting a zone Duplicating a zoneCustomizing the zone member display Enabling or disabling the default zone for fabricsSelect Configure Zoning Fabric Click Zoning PoliciesClick New Alias Creating a zone aliasEditing a zone alias Removing an object from a zone alias Deleting a zone alias Exporting zone aliasesRenaming a zone alias Click Export AliasDuplicating a zone alias Creating a zone configurationClick New Configuration Removing a zone from a zone configuration Viewing zone configuration propertiesAdding zones to a zone configuration Zone Configuration Properties dialog box displaysActivating a zone configuration Click ActivateClick Deactivate Deactivating a zone configurationClick the Active Zone Configuration tab Renaming a zone configuration Deleting a zone configurationDuplicating a zone configuration Creating an offline zone databaseDeleting an offline zone database Select Delete from the Zone DB Operation listSelect Refresh from the Zone DB Operation list Refreshing a zone databaseMerging fabrics Merging two zone databases Select Compare from the Zone DB Operation listCreating a common active zone configuration in two fabrics You cannot export an online zone database Saving a zone database to a switchExporting an offline zone database Select an offline zone database from the Zone DB listRolling back changes to the offline zone database Zoning administrationImporting an offline zone database Comparing zone databases To compare two zone databases, complete the following stepsManaging zone configuration comparison alerts Setting change limits on zoning activation Clearing the fabric zone databaseSelect Clear All from the Zone DB Operation list Removing all user names from a zone databaseFinding a member in one or more zones Select Undo CheckOut from the Zone DB Operation listFinding a zone member in the potential member list Finding zones in a zone configurationFinding a zone configuration member in the zones list Listing zone members Listing un-zoned membersClick OK on the Offline Device Management dialog box Removing an offline deviceReplacing zone members Replacing an offline device by WWN Replacing an offline device by name670 53-1003056-01 Port Fencing About port fencingViewing port fencing configurations About port fencing673 Thresholds C3 Discard Frames threshold Invalid CRCs threshold Link Reset thresholdProtocol error threshold Invalid words thresholdAdding a C3 Discard Frames threshold Adding thresholdsState Change threshold Adding thresholdsPort Fencing dialog box Add C3 Discard Frames Threshold dialog box displaysAdding an Invalid CRCs threshold Add Invalid CRCs Threshold dialog box displaysAdding an Invalid Words threshold Add Invalid Words Threshold dialog box displaysAdding a Link Reset threshold Add Link Reset Threshold dialog box displays Add Protocol Error Threshold dialog box displays Adding a Protocol Error thresholdSelect Protocol Error from the Violation Type list Adding a State Change threshold Add State Change Threshold dialog box displaysAssigning thresholds Unblocking a port Avoiding port fencing inheritanceClick OK on the Edit C3 Discard Frames Threshold dialog box Editing thresholdsEditing a C3 Discard Frames threshold Editing thresholds Editing an Invalid CRCs thresholdEditing an Invalid Words threshold Click OK on the Edit Invalid CRCs Threshold dialog boxClick OK on the Edit Link Reset Threshold dialog box Editing a Link Reset thresholdEditing a Protocol Error threshold Click OK on the Edit Invalid Words Threshold dialog boxClick OK on the Edit Protocol Error Threshold dialog box Editing a State Change thresholdViewing all thresholds on a specific Fabric OS device Finding assigned thresholdsViewing thresholds Removing thresholds Removing thresholds from individual objectsRemoving thresholds from the thresholds table Removing thresholds Ficon configurations Ficon EnvironmentsConfiguring a switch for Ficon operation Configuring a switch for Ficon operationPlanning the configuration 697 Configuring the switch Select Discover FabricsClick Add License Click Download 701 Configuring Ficon display Configuring an Allow/Prohibit Matrix703 Click Manual Allow/Prohibit Configuring an Allow/Prohibit Matrix manuallyClick Analyze Zone Conflicts Manual Allow/Prohibit dialog box displays, as shown in onClick OK on the Manual Allow/Prohibit dialog box Copying an Allow/Prohibit Matrix configuration Save As/Duplicate dialog box displays, as shown in on707 Activating an Allow/Prohibit Matrix configuration Activating an Allow/Prohibit Matrix configurationDeleting an Allow/Prohibit Matrix configuration Confirmation message displays, as shown in onChanging window arrangement Changing the Allow/Prohibit Matrix displayCascaded Ficon fabric Clearing port namesConfiguring a cascaded Ficon fabric Cascaded Ficon fabric Cascaded Ficon fabric merge Enabling DLS713 Merging two cascaded Ficon fabrics Set up merge options screen displays Resolving merge conflicts Specify the Cable length between switch portsRange is form 10 through 500 km. The default is 50 km TOV717 Port Groups dialog box displays, as shown in on Select Configure Port GroupsViewing port groups To view port groups, complete the following stepsTo edit a port group, complete the following steps Swapping blades Swapping blades Click OK721 722 53-1003056-01 Element Manager CLI IP Element ManagerElement Manager overview Accessing the IP Element Manager CLI Element Manager CLIElement Manager interface overview Accessing the Element Manager interfaceSelect Configure Element Manager GUI Element Manager interface overviewPort Count Switch propertiesSerial # Build Label727 Element Manager toolbar Properties dialog box Ports tabDisplaying port properties Temperature Tx Bias Current Tx PowerRx Power Port ModeYou can compare physical and virtual port properties Comparing physical port propertiesComparing physical and virtual port properties Comparing physical and virtual port properties Table capabilities Status indicator iconsSearch Historical performance monitoring Performance dataReal-time performance monitoring Real Time Graph/Table Historical Graph/TableResetting port counters Configure dialog boxConfiguring Vlan Changing the standby Management Module to active Management Module switchoverEnable or Disable Switch Fabric Module MR Switch Over Status dialog boxPort mirroring Configuring port mirroringPort mirroring Editing a port in port mirroring Select Configure Port MirroringAdding a port to port mirroring Deleting a port from port mirroring Configuring sFlow in Element ManagerSFlow Web Management interface Accessing the Web Management interfaceSelect Configure Element Manager Web Web Management interfaceSelect Configure Element Manager Front Panel Web Management interface troubleshootingAccessing the IP device front panel Element Manager Front PanelConfiguration Repository and Backup Configuration repositoryConfiguration repository 745 Saving the configuration status 747 Viewing the configuration Comparing product configurations749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Change tracking Configuration deviationViewing configuration deviation status 754 53-1003056-01 Configuration snapshots Configuration Snapshots tab displays, as shown in FigureComparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Saving a configuration snapshot Click Save SnapshotSearching the configuration snaphots Schedule backup Scheduling a configuration backup763 Disabling a backup schedule Edit Automatic Configuration Backup dialog box displaysIP Configuration Wizard Configuration requirementsPayload name Description Product Payloads PayloadsPayloads DNSPayload name Description Creating a payload configurationSelect Configure Configuration Wizard Interface PayloadsCreating a payload configuration 769 770 53-1003056-01 Save to Flash and Reload Don’t Save to Flash or ReloadSave to Flash Configuration dialog box Deployment Schedule pane 773 Duplicating a payload configuration Duplicating a payload configurationModifying a payload configuration Select a configuration from the Product Configurations listModifying a payload configuration Deploying a payload configuration Deploying a payload configurationDeleting a payload configuration CLI Configuration Management This chapter CLI configuration overviewViewing existing templates Select Configure CLI ConfigurationViewing existing templates Product configuration templates Product configuration templatesCreating a new product configuration To create a new configuration, complete the following steps780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 Changing product credentials CLI Credentials dialog boxImporting parameter values into a configuration Same value for each target Previewing CLI commandsPreviewing CLI commands Different values for each target Select a row in the Parameters table Click PreviewCLI command guidelines CLI command guidelinesCopying a product configuration Editing a product configuration Testing a configuration To test a configuration, complete the following stepsValid and invalid responses from devices Editing the CLI responses properties fileSuccessresponseend Editing the Network OS CLI responses properties fileSuccessresponsestart FailureresponseendConfiguration command response validation Valid and invalid responses from devicesConfiguration error checking Deleting a configurationUsing a dash character in CLI Configuration manager To delete a configuration, complete the following stepsCLI configuration deployment Deploying a configuration on demandMonitoring configurations Creating a monitoring configuration796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration Select Reports Product CLI CLI deployment reportsViewing CLI deployment reports Configuring an hourly deployment schedule CLI configuration schedulingConfiguring a one-time deployment schedule Product CLI Report displaysConfiguring a monthly deployment schedule Configuring a daily deployment scheduleConfiguring a weekly deployment schedule CLI configuration schedulingConfiguring a yearly deployment schedule 806 53-1003056-01 Image Repository for IP Products Obtaining software filesProducts supporting the image import Boot image managementViewing the list of boot images Products supporting the image importManually importing boot images Select Configure Firmware ManagementDeploying boot images to products Deleting boot images from the Management applicationManually importing software images Software image managementViewing the list of software images Software image managementAutomatically retrieving software images from products Click OK on the Import Software Image dialog boxDeploying software images to products Right-clickConfiguration Schedule BackupSchedule Backup dialog box displays, as shown in Figure Deleting software images from the Management applicationUnified image management Unified image managementViewing the list of unified images Importing unified images into the Management application Import Firmware Image from File dialog box displaysClick OK on the Manual Import Unified Image dialog box Deleting unified images from the Management application Updating unified imagesDeploying unified images to products Complete the following stepsSerial firmware update and activation for NOS devices Vlan Manager Default VlanVlan Management Private Vlan Remote Switched Port AnalyzerSuper-aggregated Vlan Configuration requirements for Vlan Manager Transparent LAN SupportVlan management in a VCS environment Feature VCS FC mode Logical chassis mode Standalone modeDisplaying a list of VLANs Vlan Manager tabsDisplaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Port VLANs Adding or modifying port VLANs828 53-1003056-01 Adding or modifying dual mode ports Select Configuration Manager Vlan ManagerL2 mode Tagged mode Assigning DCB ports to a VlanAdding Vlan properties 832 53-1003056-01 Deleting a port Vlan in Vlan view Modifying port Vlan propertiesDeleting port VLANs from products Deleting a port Vlan in Product viewSpanning Tree Protocol configuration Spanning Tree Protocol configurationDeploying Vlan configurations Select a Save Configuration optionConfiguring STP or Rstp on a port Vlan STP, RSTP, Mstp Target context STP typeIOS Vlan STP, Rstp FOS Vlan MstpDeploying an STP configuration on a port Vlan Configuring Mstp on a product Assigning an Mstp instance to a Vlan Adding an Mstp instanceVlan routing Vlan routingManaging IP addresses on an SVI Deploy IP Configuration dialog box Select a Save Configurations option Vlan routing Click the Deploy now optionMpls pre-configuration Mpls ManagementMpls Licensed and Configured Products group Mpls licensingConfiguring LDP Mpls overviewLSP Select the Admin Groups tab Figure Viewing LSP Admin Group informationSelect Configure Mpls LSP Viewing LSP path information Select the Paths tab FigureViewing Rsvp LSP information Select the Rsvp LSPs tab FigureViewing saved LSP configurations Related topics Mpls overviewAdding an LSP admin group LSPEditing an LSP admin group Duplicating an LSP admin groupDeleting an LSP admin group Adding an LSP pathEditing an LSP path You can edit an LSP path by taking the following stepsDeleting an LSP path LSP Delete Path Configuration wizard displays FigureDuplicating an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Duplicating an Rsvp LSP Delete Rsvp LSP Configuration wizard displays FigureEditing an Rsvp LSP Deleting an Rsvp LSPSelect the saved configuration Click the Edit button Editing a saved LSP configurationDuplicating a saved LSP configuration Select the saved configuration Click the Duplicate buttonDisplaying LSP Topologies Deleting a saved LSP configurationSelect the saved configuration Click the Delete button Select Monitor Mpls LSP TopologyLSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 Viewing VLL instances Select Configure Mpls VLLVLL manager VLL Mode StatusTag Mode Viewing Saved VLL configurations To view current saved VLL configurations, do the followingAdding or editing a VLL instance To add a new VLL instance do the followingConfiguring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box Deploying target actions using the VLL Manager VLL Configuration wizard Deploy Target Actions dialog boxDeploying VLL properties using the VLL Manager VLL configuration wizard Deployment PropertiesScheduling deployment using the VLL Manager VLL configuration wizard Deployment Schedule dialog boxReviewing the VLL Manager configuration Reviewing the VLL Manager summaryDeleting VLL instances Creating a new VLL instance using duplicateEditing a VLL instance To edit a VLL instance, do the followingVLL Monitor Dialog box displays Figure Filtering VLL traffic monitoringSelect Monitor Mpls VLL Virtual Private LAN Services Vpls overview VLL883 Viewing Vpls instances and peer topologies Select Configure Mpls VplsVpls Manager Vpls ManagerVpls settings Endpoint settings PE DevicesVpls Manager Peer Topology tab Viewing Saved Vpls configurations To view current Vpls configurations, do the followingAdding or editing a Vpls instance Configuring devices using the Vpls Manager Vpls Configuration wizard Device Configuration dialog boxConfiguring endpoint settings Row is added to the Configured Endpoint Settings listDeploying target actions using Vpls Manager Deployment Properties page displays FigureDeploying Vpls properties using Vpls Manager Vpls Configuration wizard Deployment Properties dialog boxScheduling deployment using Vpls Manager Vpls Configuration wizard Deployment Schedule dialog boxReviewing the Vpls Manager summary Creating a new Vpls instance from a duplicateTo edit a Vpls instance, do the following Editing a Vpls instanceDeleting a Vpls instance Vpls Monitor dialog box displays Figure Filtering for Vpls traffic monitoringSelect Monitor Mpls Vpls Viewing, creating, and deleting Vcid pools Select Configure Mpls Vcid PoolVcid pools Vcid pools802.1ag Connectivity Fault Management Configuring a maintenance associationAdd Maintenance Association dialog box displays 802.1ag CFM900 53-1003056-01 Click Close on the Configure 802.1ag CFM dialog box Editing a maintenance association802.1ag Connectivity Fault Management Edit Maintenance Association dialog box displays902 53-1003056-01 903 Adding a MEP to a maintenance association 28 802.1ag Connectivity Fault Management905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Sending a linktrace message Click LoopbackClick Linktrace Configuring frame delay 915 916 53-1003056-01 VIP Servers overview Select Configure Application Delivery VIP ServersVIP Servers Viewing the VIP ServersViewing the VIP Servers Viewing VIP Server information Viewing VIP Server informationVIP Servers list Enabling servers or server ports Enabling or disabling servers or server portsServer port statistics Disabling servers or server portsDeleting a row from the Server Port Statistics list Global Server Load Balancing Gslb ManagerTo view the Gslb Manager, perform the following steps Select Configure Application Delivery GslbViewing the Gslb Manager Gslb policy management Gslb policy managementCreating a Gslb policy To create a Gslb policy, perform the following steps926 53-1003056-01 Applying metrics on the Metrics tab Connection Load Weights Adding a prefix on the Prefix tabDeleting a prefix from the Prefix list Importing IP addresses from a file930 53-1003056-01 Gslb site management Adding a site configurationGslb site management Adding ServerIron ADX products to the site Gslb zone configuration Gslb zone configurationAdding a zone configuration Managing zonesAdd Hosts dialog box Adding a host to a zone List of IP Addresses and Weights dialog box displays Editing the list of IP addresses and weightsDeleting a zone configuration Controller Configuration tab displays Controller configurationController configuration Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL Certificates for ServerIron Products SSL certificatesSSL Certificates dialog box has two tabs SSL certificate configurationAccessing SSL certificates on the Certificate View tab Certificate View tab Figure Product View tab Figure945 Accessing SSL certificates on the Product View tab SSL Certificates dialog box Product View tabGenerating a certificate signing request 948 53-1003056-01 949 Adding an SSL certificate and key file Related topicEditing an SSL certificate and key file Duplicating an SSL certificate and key file Viewing SSL certificate detailsImporting certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Appending SSL certificates Chaining SSL certificates960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Deployment Manager Editing a deployment configurationSelect Configure Task Scheduler Introduction to the Deployment ManagerDuplicating a deployment configuration Viewing deployment logs Deleting a deployment configurationDeploying a configuration Generating a deployment reportGenerating a deployment configuration snapshot report Searching the configuration snapshots967 968 53-1003056-01 Performance Data SAN performance overviewSAN performance measures SAN performance overviewExample of default access control list SAN performance management requirementsExample of Snmp Example of setting Snmp 974 53-1003056-01 FCIP-MIB YES Snmp GETSnmp SET SAN real-time performance data SAN real-time performance dataGenerating a real-time performance graph Select Monitor Performance Real-Time GraphOpen the Real Time Performance Graphs dialog box Filtering real-time performance dataReal Time Performance Graphs dialog box displays Graph display Protocol Exporting real-time performance dataPerformance statistics counters Fcip SnmpFC, GE HttpHBA, CNA HCM API HBA, CNAType Protocol Source OID value IP configuration requirements IP performance monitoring and traffic analysisIP real-time performance monitoring IP real-time performance monitoringMonitoring real-time performance 984 53-1003056-01 Click Sources from the Real Time Graphs/Tables dialog box Adding products and ports to real-time performanceRemoving products and ports from real-time performance Select measures Real Time Graphs/Tables dialog box displays Adding measures to productsRemoving measures from products Click Mibs tab in the Available Measures areaAdding measures to ports Removing measures from ports Adding collectibles to monitoringRemoving collectibles from monitoring Configuring the performance graphConfiguring the performance graph display Show data points graph Configuring graph options Minutes Hours DayGraph Options dialog box Historical Graphs/Tables dialog box 993 Choose Export File Format dialog box displays Exporting a graphPrinting a graph Spreadsheet .csv Image .pngIP historical performance monitoring IP historical performance monitoring Editing system collectorsDisplaying historical data collectors Name Collector Basics997 Enabling a historical data collector Adding or editing a historical data collector999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Duplicating a historical data collector Configuring a MIB walk instanceAdding third-party device MIB objects manually Duplicating system data collectors Deleting a historical data collectorAdding, editing, or duplicating a user-defined expression Select Monitor Performance Historical Data Collectors1007 Deleting an expression Complete the following steps to delete an expressionViewing Historical Graphs/Tables Select the Data Monitoring tabNetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs MIB data collectors MIB data collectorsMapping a MIB object to a unit name To map a MIB name, use the following formatIP Custom performance reports IP Custom performance reportsCreating a custom report Complete the following steps to create a report1015 Time Settings Sampling Granularity 1017 Click the Identification tab Interpreting the Snmp Monitor report Exporting an Snmp Monitor reportIP sFlow configuration IP sFlow configurationConfiguring sFlow Interface Speed Sampling rate IP sFlow configuration Click NextInterface Payload sFlow Settings dialog box displays Product Payload SFlow Destination dialog box displays Click Next Creating custom sFlow reports Select the Report Definitions tabIP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Select the User Identification tab Add Report Definitions dialog box, User Identification tabAdd Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Scheduling custom sFlow reports Select Monitor Traffic Analysis Custom Reports1035 1036 53-1003056-01 Suspending a custom sFlow report schedule Device-level configuration requirementsIP Traffic analyzer monitoring and sFlow reports IP Traffic analyzer monitoring and sFlow reports 802.1X configuration requirementsDisplaying sFlow monitoring reports Select Monitor Traffic Analysis Monitor sFlowSelecting a report Report listMeasure list This field shows the date and time the report was requested Save and close the ipconfig.properties fileInterpreting an sFlow traffic report Viewing top MAC talkers Viewing top Vlan talkers Category list, select L3/L4 ReportsViewing all Layer 3 and Layer 4 traffic Viewing all IPv4 Layer 3 or Layer 4 Top TalkersViewing IPv4 top TCP talkers Reports list, select IPV4 Next list, select TCPTCP Viewing IPv4 top UDP talkers Icmp Viewing IPv4 top Icmp talkersCategory list, select L3 or L4 Reports Viewing IPv4 Others Viewing IPv6 Top TalkersViewing other Layer 3 or Layer 4 Top Talkers RST-SYN RST-FIN RST-PSH RST-URG FIN-SYN Enabling and viewing TCP reportsDefining invalid TCP packet combinations Complete the following steps to change these combinationsType list, select Invalid TCP Flags Displaying the invalid TCP Flags reportValid TCP flags report Viewing BGP paths report Viewing VCS fabric Top Talker reportsIP traffic accounting Troubleshooting sFlow reportsIP traffic accounting Select Monitor Traffic Analysis Traffic Accounting1055 1056 53-1003056-01 Frame Monitor Frame MonitorScsi RW Frame typesScsi Creating a custom frame monitor Frame Monitoring requirementsFrame Monitor Configuration Status dialog box Editing a frame monitor Assigning a frame monitor to a portFinding frame monitor assignments Removing a frame monitor from a portRemoving a frame monitor from a switch 1064 53-1003056-01 Power Center Power center overviewViewing PoE data for products Select Monitor Power CenterData monitoring Viewing PoE data for ports To view PoE data for a port, complete the following stepsFiltering port details To filter port details, complete the following stepsViewing attached device properties 1070 53-1003056-01 Viewing PoE charts To view a PoE chart, complete the following steps1072 53-1003056-01 1073 Refreshing PoE data Powering up PoE-capable ports on demand PoE power on demandConfiguring automatic data refresh PoE power on demandPowering down PoE-capable ports on demand Schedule PoE power deployment Scheduling an power up deploymentSchedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Click Show Ports Scheduled Ports ScheduleName dialog box displaysDeleting a power deployment schedule PoE thresholds PoE thresholdsAdding a PoE product threshold PoE Allocation PoE Consumption Consumption %Adding a PoE port threshold Thresholds dialog box Choose one of the following measures Port allocation Port consumption Port consumption %Viewing PoE thresholds To view PoE thresholds, complete the following stepsTo update a PoE threshold, complete the following steps Updating a PoE thresholdEnabling PoE thresholds To enable PoE thresholds, complete the following stepsTo disable PoE thresholds, complete the following steps Disabling PoE thresholdsDeleting PoE thresholds Monitoring real time power performance on productsViewing PoE performance Viewing PoE performance1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy Monitor Policy monitor overviewFabric policy monitors Policy monitor overviewSwitch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Management policy monitor Preconfigured policy monitorsNext Run Next time the policy will run using the format Frequency WeeklyViewing policy monitor status Viewing existing policy monitors Adding a policy monitor Select Monitor Policy Monitor1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Configuring a one-time policy monitor schedule Policy monitor schedulingConfiguring a weekly policy monitor schedule Configuring an hourly policy monitor scheduleConfiguring a daily policy monitor schedule Configuring a monthly policy monitor scheduleEditing a policy monitor Deleting a policy monitorPredefined configuration rules Configuration rulesViewing a predefined configuration rule Add Configuration Rule dialog box displays Figure Viewing configuration rule detailsConfiguration rules Port Profile Interface Rule expressions 1118 53-1003056-01 1119 Adding a configuration rule Click Cancel on the Add Configuration Rule dialog boxDuplicating a configuration rule Click OK on the Add Configuration Rule dialog boxClick Add Configuration Rule Editing a configuration ruleClick the Switch/Router Checks tab Deleting a configuration rule Exporting a configuration ruleImporting a configuration rule Click OK on the Edit Configuration Rule dialog boxAdd Configuration Rule dialog box displays Viewing predefined configuration conditionsAdding a configuration condition Select Add Condition Add Condition dialog box displays FigureDuplicating a configuration condition Selecting a productEditing a user-defined configuration condition You cannot edit a predefined configuration conditionPredefined conditions Configuration rules Predefined conditions Viewing a predefined configuration block Policy Monitor dialog box displays Click AddSelect Add Block Adding a configuration blockConfiguration rules Add Monitor dialog box displays Add Block dialog box displays FigureDuplicating a configuration block Select the Switch/Router Checks tabEditing a user-defined configuration block You cannot edit a predefined configuration blockClick Delete Click Yes on the confirmation message Deleting conditions and blocksPredefined blocks Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report1137 Exporting a policy monitor report Click Export File Download dialog box displays Click SavePolicy Monitor dialog box displays Viewing historical reports for all policy monitorsViewing historical reports for a policy monitor Click HistoryViewing historical reports for a policy monitor Fault Management Fault management overviewSupported IP address types Event notificationRestrictions Event Purging1143 Defining filters Setting up basic event filteringDefining filters Setting up advanced event filtering Click Advanced1146 53-1003056-01 Snmp traps Snmp traps Adding a trap recipient to one or more switchesSelect Monitor Snmp Setup Product Trap Recipients Snmp Trap Recipients dialog box, shown in , displaysSnmp trap forwarding Removing a trap recipient from one or more switchesSelect Monitor Snmp Setup Trap Forwarding Snmp Trap Forwarding dialog box, shown in , displaysSelect the Enable trap forwarding check box Adding a trap destinationAdding a new trap filter 1152 53-1003056-01 Event reception Accept Snmp v1/v2c traps with any community string Event Reception dialog box, shown in , displaysDo not accept Snmp v1/v2c traps Accept Snmp v1/v2c traps with only these community stringsAdding an Snmp v3 credential Snmp traps Snmp security and authenticationPrivacy protocol Authentication Result Credential type Adding an Snmp v1 or v2c community string Importing a new MIB into the Management applicationTrap customization Registering traps Click the Registered button Unregistering a registered trapCustomizing a registered trap definition Enabling or disabling Snmp informs Reverting the customization of a registered trap to defaultSnmp informs Select a product group from the Fabric / Products listSyslogs Adding a syslog recipientTo remove a syslog recipient, complete the following steps Removing a syslog recipientSyslogs Adding a syslog forwarding destination Select Monitor Syslog Configuration Syslog ForwardingSelect the Enable syslog forwarding check box Syslog Forwarding dialog box, shown in , displaysAdding a syslog filter 1165 Creating an event action definition Event action definitionsSnort message forwarding Select Monitor Event Processing Event ActionsSelecting an event for an event action Event action definitions1168 53-1003056-01 Configuring varbind filters Selecting source address products and ports Sources pane of the Add Event Action dialog boxClick Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Special events handling Acknowledging special events1177 Configuring event action e-mail settings Click Cancel to cancel the operation Modifying an event action definitionConfiguring event actions for Snort messages Deleting an event action definitionImport Snort Rule File dialog box displays, shown in Figure Pseudo eventsClick the Import Snort Rule button Select Monitor Event Processing Pseudo Events Displaying pseudo event definitionsCreating pseudo event definitions Pseudo Events dialog box, shown in , displaysSetting pseudo event policies Filtering pseudo event traps 1185 Editing a pseudo event definition Deleting a pseudo event definitionAdding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Select Reports Event Custom Reports Defining report settingsEvent custom reports Defining the report identity 1196 53-1003056-01 Filtering a report definition To filter a report definition, complete the following stepsAdd/Edit Report Definition dialog box Filter tab Filtering report events by date and time Add/Edit Report Definition dialog box Product tab displays1200 53-1003056-01 Editing a report definition Event custom report schedules Event custom report schedulesDeleting a report definition Adding or editing an event report schedule One Time Copying part of a log entry Event logsViewing event logs Event logsCopying an entire log entry Exporting the entire logDisplaying event properties from the Master Log Mailing all event details from the Master LogMailing selected event details from the Master Log Event Field Description Event logs Event PropertiesClick Close to close the Event Properties dialog box Exporting the Master Log Copying part of the Master LogCopying the entire Master Log Select Table Copy TableFiltering events in the Master Log ‘unnamed’ filter Duplicating a Filter ‘none’ filterEditing a Filter Deleting a FilterConfigure Pcap dialog box, shown in , displays Configuring packet capturesSelect Configure Packet Capture Pcap Packet Capture Pcap1214 53-1003056-01 Capturing Server and Client support save data Technical SupportServer and client support save Capturing Server support save data Capturing Client support save data Client support save using a command line interface Server and client support saveDevice technical support Device technical supportScheduling technical support information collection Click the Schedule tabSelect the Enable scheduled Technical Support Data check box 1221 Starting immediate technical support information collection Click OK on the Technical SupportSave dialog boxClick the Generate Now tab, if necessary Firmware Type Click Close on the Technical SupportSave Status dialog boxField Description ProgressType Default location Default naming convention Viewing the technical support repositoryAvailable SupportSave Saving technical support information to another locationClick OK on the Technical Support Repository dialog box Mail buttonMailing technical support information Deleting technical support files from the repository Select the file you want to delete in the table Click Delete1229 1230 53-1003056-01 Viewing IP reports ReportsReports overview Browser requirementsSelect Export as Html Select Export as CSV Exporting and saving IP reports to a fileExporting IP reports to e-mail recipients Select E-mail as Html Select E-mail as CSVIP report contents IP Wired Products reportIP Wired Products report Stacking Units Detailed Product ReportExport button Modules Stacking PortRealtime IP AddressesGRE Tunnels Cluster Peer MCTPhysical Ports Controller ClusterDetailed Cluster Report AP List CountNodes System InformationSystem Name values Physical Media IP Module reportFC Ports Field/ComponentDescription IP Port VLANs reportIP Layer 3 Vlan report IP Subnet report IP Subnet report Layer 3 Vlan report fields and componentsIP Address report IP Address reportMAC Address report Port NameIP Physical Ports Realtime report IP Physical Ports Realtime reportIP Stacking Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime reportIP Deployment reports IP Deployment reportsViewing a deployment report Select Reports DeploymentUser-defined reports Preconfigured reportsReports Template Manager overview Reports Template Manager overviewReport Template Manager dialog box displays Figure Accessing the Report Template ManagerSelect Reports Report Manager Viewing a report Deleting reports Importing a report templateExporting a report template Report content and functions Products List report Product CountIP address of the product Displayed for products that support stacking Physical port information for each port on the product Cluster Product ReportPorts Tx/Rx Ratio report Detailed Product Report Summary table LocationDevice Name Total Received MBMax Rx Utilization % Low Traffic Ports reportMax Tx Utilization % Exporting data from the report This appendix Menu Command Command OptionsApplication menus Dashboard main menusIP main menus Command Command OptionsIP main menus Edit MenuDiscover Menu Configure Menu Element Manager. Select to configure a selected deviceLsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu Tools Menu IP shortcut menusIP shortcut menus IronWare device Component Menu/Submenu Commands CommentsIP shortcut menus IP Subnet Launches the Real-Time Graphs / Tables dialog boxDCB L2 ACLVCS/VDX Third-party device 1273 1274 53-1003056-01 Network OS Call Home Event Call Home Event TablesIP Call Home Event Event reason code FRU code/Event type Description SeverityCall Home Event Tables Network OS Call Home Event Event Categories Product status eventsProduct audit events Security events for IP devices Security eventsSecurity events for FC devices Security eventsUser action events Management server eventsProduct events Product eventsIP Performance monitoring events Trap nameIP Performance monitoring events User Privileges About user privilegesAbout user privileges Application privileges and behavior Privilege Description No Privilege Read-Only Read/WriteSetup Mail server used to Send e-mail Disables Event Event Notification Setup button in the Users dialog boxForwarding dialog box Monitor menu Event Storage option Options commandRegistration Syslog RegistrationUpdate and OK Management commandEnables the Security L2 Performance Graphs dialog box and enables all controlsDisables Policy Monitor Enables Policy Monitor Policy monitors Command on the Monitor MenuServer Options menu Configure Switch Replicate menuLogs menu Capture, and View SupportSave, Upload Repository command Upload Failure DataView Repository Technical Support menu Repository commands Monitor Technical1291 Compare/Merge dialog Cancel and Help buttonsZoning Compare and ExportSwitch, Activate Compare/Merge dialog Zone Config tabZoning Scope list does Edit Limits commandLsan Zoning Device About user privileges IP privileges and behavior IP CLIIP L3 ACL FilterIP MPLS- LSP IP Mpls VLLIP Mpls Vpls Profile tabApplication Features and Role Access Levels About Roles and Access LevelsAbout Roles and Access Levels IP privileges and behavior 1299 IP Mpls LSP Viewing Fabric properties Device PropertiesViewing SAN device properties Click OK on the FabricName Properties dialog box to close Viewing SAN device propertiesViewing SAN device properties Fabric properties Viewing SAN device properties Device properties Remote Switch IP Preshared key configuredRemote Switch Name Remote Switch WWNSelect Edit Properties Viewing Storage propertiesICL Viewing SAN device properties Viewing iSCSI Properties dialog box ISCSI Service Command Descriptor Block CountDigest Error Count ISNS ServiceViewing port properties Address Class of ServiceAdditional Port Info Active FC4 TypesViewing SAN device properties Port properties ISCSI Capable Long Distance SettingISCSI button Locked Port TypePort Speed Gb/s Symbolic NameTroubleshooting list Port StateIP device properties Port properties IP device propertiesViewing IP device and port properties User Port #Detailed Report button VCS ModeConfig Mode AliasIP device properties Port Profiles tab Profile ModeAccess Points tab Show listChassis-Power Supply section of Detailed Report Connected switch \ PortTransceiver Temperature Device MACViewing VCS fabric properties Nodes tab Licensed FeaturesAccess Gateway Mode Fabric StatusDomain Count MAC CountVLANs Associated MACs listNative VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port SFP/Port Optics Host propertiesHost properties Viewing adapter port properties Field DescriptionHost properties Adapter port properties Properties customization Adapter port properties Properties customizationAdding a property field Click OK to closeEditing a property field Deleting a property fieldEditing a property field directly Properties customization Construct Matches Regular ExpressionsCharacters Predefined character classes Regular Expressions CharactersCharacter classes Posix character classes US-ASCII onlyClasses for Unicode blocks and categories Regular Expressions Posix character classes US-ASCII onlyJava.lang.Character classes simple java character type Boundary matchesPossessive quantifiers Regular Expressions Greedy quantifiersReluctant quantifiers Logical operatorsRegular Expressions Back references Special constructs non-capturingRegular Expressions CLI Templates CLI Templates HyperEdge Stack Port Creation HyperEdge Stack EnableHyperEdge Stack Disable HyperEdge Stack Port DeletionCLI Templates HyperEdge Stack Trunk Deletion IronWare OS Enable Web Element ManagerIronWare OS Configure L3-Access-List HyperEdge Peri Port CreationMCT Cluster Deployment CLI Templates IronWare OS Configure L2-Access-ListMCT Cluster Creation MCT Cluster UndeploymentCLI Templates MCT Cluster Deletion Mpls Loopback Interface ConfigurationMpls Core Interface Configuration MCT Client CreationNetwork OS Associate MAC to Port Profile CLI Templates Mpls Endpoint ConfigurationNetwork OS Configure CRC Align Errors Monitor AmppNetwork OS Configure Inter Frame Gap Violation Monitor CLI Templates Network OS Configure Extended L2 Access ListNetwork OS Configure Inter Frame Gap Violation Fencing Network OS Create CoS Mutation Map Network OS Configure RX Symbol Errors MonitorNetwork OS Configure Standard L2 Access List Network OS Create Traffic Class Map CLI Templates Network OS Create Lldp ProfileNetwork OS Create Port Profile Network OS Create Vlan Classifier GroupNetwork OS Update Vlan on Port Profile Network OS Update ACL on Port ProfileNetwork OS Update QoS on Port Profile CLI Templates Network OS Create Vlan Classifier RulePrivate Vlan Configure Pvaln mode in L2 interface CLI Templates Private Vlan Configure Vlan as a PvlanPrivate Vlan Delete Pvlan configuration from Vlan Private Vlan Add native Vlan mode to Pvlan trunkPrivate Vlan Delete Pvaln associations from trunk port Private Vlan Delete Pvlan mapping from promiscuous portPrivate Vlan Delete Pvlan associations from host port $PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGERVRF Route Targets Export and/or Import Configuration VRF Route Distinguisher ConfigurationVRF Maximum routes configuration for IPV4 Address Family VRF Delete Route Targets Export and/or Import ConfigurationCLI Templates VRF Display VRF Information IronWare OS Vlan Configure virtual routing interfaceIronWare OS Vlan Enable Spanning Tree Protocol on IOS Vlan IronWare OS Vlan Remove interfaces from Vlan as untaggedNetwork OS Vlan Vlan Interface Creation Network OS Vlan Layer2 Switch Port ConfigurationNetwork OS Vlan Native Vlan Configuration Network OS Vlan Vlan Interface DeletionNetwork OS Vlan Enable Spanning Tree Protocol on NOS Vlan Network OS Vlan Access Interface ConfigurationNetwork OS Vlan Disable Access Interface Configuration 1356 53-1003056-01 Troubleshooting Application Configuration Wizard troubleshooting Browser troubleshootingElement Manager troubleshooting Client browser troubleshootingConfiguration backup and restore troubleshooting Client browser troubleshootingFirmware download troubleshooting Firmware download troubleshootingSw0FID128admin sshutil delknownhost Select Start Settings Control Panel Java Launch Client troubleshootingLaunch Client troubleshooting Unix operating systems Master Log and Switch Console troubleshootingMaster Log and Switch Console troubleshooting Click the Global Settings tab Patch troubleshootingPatch troubleshooting Select Discover IP ProductsProfessional edition login troubleshooting Professional edition login troubleshootingServer troubleshooting Management console errors Server Management Console troubleshootingServer Management Console troubleshooting Select Properties Supportsave troubleshootingSupportsave troubleshooting Technical support data collection troubleshooting Technical support data collection troubleshootingWireless troubleshooting Problem Master log warning messageZoning troubleshooting Zoning troubleshooting Wireless troubleshootingZoning troubleshooting Database tables and fields AchcallcenterconfigDatabase Fields AchcallcenterAchfilter Database tables and fields AcheventAcheventfiltermap AchinfoAdapterdriverfiledetails AdapterportconfigdetailsAdapterportconfigproperty AordevicegroupmapAorhostmap AordevicemapAorfabricmap AorinmportgroupmapBirtreportruntemplate AvailableflyoverpropertyBirtreportparameter Bootimagefiledetails BirtreportscheduleconfigBootimagedrivermap Database tables and fields BirtreportruntemplateBootlunsequencedetail Database tables and fields BootimagefiledetailsBootlunsequence CapabilityDatabase tables and fields Card Cedapplicationmember CardcapabilityCedapplication CeduserpreferenceCfgbackuparchive CeeportClitemplate Database tables and fields CfgbackuparchiveChangelog Database tables and fields Clitemplate ClientviewClientviewmemberhost ClientviewcolumnClientviewmember ClusterCnaproductconnectivity CnaethportconfigCnaethport Collector Database tables and fields CnaethportconfigCnaport Collectorsnmpexpressionentry ConfigblockCollectormibobjectentry CollectortargetentryConfigcondition CoreswitchDatabase tables and fields Coreswitch Coreswitchcollection CoreswitchcapabilityCoreswitchchecksum CoreswitchdetailsDatabase tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Database tables and fields Cryptoswitch CryptotargetcontainerDashboard Database tables and fields CryptotargetcontainerCustomfavoritesobjectlist Dashboardcanvaspreference Database tables and fields DashboardDashboardcanvas DashboardproviderDashboardwidget Dashboardwidgetpreference DefaultfavoritesDatabase tables and fields Dashboardwidget Deploymentconfiguration Database tables and fields DefaultfavoritesDefaultwidgetpreference Deploymentproductstatus Database tables and fields DeploymentconfigurationDeploymenthandler Deploymentstatus Database tables and fields DeploymentproductstatusDeploymentreporttemplate Deploymenttargetmap DeviceDatabase tables and fields Device Tacpluspasswordportcfg TacpasswordportcfgTacpasswordreadonly TacpluspasswordreadonlPortcount LicensedfeaturesTrapregistered MplsmanagestateNetconftransport IsdcbswitchProductfamily =SSH =HTTPS =WINGHTTPS PoecapableVcsid IsprincipalswitchWirelesstype VcslicensedDeviceconnection DeviceenclosureDatabase tables and fields Deviceenclosure Deviceenclosuremember DevicefdmidetailsDevicegroupentry Database tables and fields DevicefdmidetailsDevicegroup Devicenode Database tables and fields DevicegroupDevicemacgroupmapping Database tables and fields Devicenode DeviceportDeviceportgigeportlink DeviceportmacaddressmapDiskusage EncryptionengineDatabase tables and fields Encryptionengine EncryptiongroupDatabase tables and fields Encryptiongroup Encryptiongroupmember EncryptionkmipparametersEthernetisl EncryptiontapepoolEthernetcloud Event Database tables and fields EthernetislEventcategory Database tables and fields EventEventcallhome EventdescriptionEventdetails EventfwdfilterEventmodule Database tables and fields EventfwdfilterEventinstance Eventpolicy EventnotificationEventorigin Database tables and fields Eventpolicy EventpolicysourceentryEventprocessormap EventruleDatabase tables and fields Eventpolicysourceentry Eventruleaction FabricDatabase tables and fields Eventrule Database tables and fields Fabric Fabricchecksum FabriccollectionFabricdiscoverypolicyrule Database tables and fields FabriccollectionFabricdiscoverypolicy FabricmemberDatabase tables and fields Fabricmember FabricthresholdsettingFavorites FabricvcsclustermapFcipporttunnelmap Database tables and fields FavoritesFcipcircuitportmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Circuitstatus MismatchedconfigurationsSecurityflag CircuitstatusstringFciptunnelperformance Featuresusage FeatureFeatureeditionmap FcoedeviceFirmwarefiledetail Database tables and fields FeaturesusageFicondeviceport Foundrymodule FirmwareswitchdetailFoundrydevice Foundryphysicalport Database tables and fields FoundrymoduleFoundryphysicaldevice FporttrunkgroupFRU Generatedreport FtpserverDatabase tables and fields FRU Gigeport Database tables and fields GeneratedreportGlobalvlan GigeportethernetcloudlinkGigeportstats GretunnelinterfaceHacluster HBADatabase tables and fields HBA Hbaport HbanodemapSUPPORTEDFC4TYPES SwitchipOperatingtopology SupportedcosHbaportdetail Database tables and fields Hbaportdetail Hbaportdeviceportmap HbaportfcoedetailsDatabase tables and fields Hbaportfcoedetails Hbaremoteport Database tables and fields Hbaremoteport HbaremoteportlunHealthtargetstatus HbatargetHealthstatus HostdiscoveryoptionHostdiscoveryrequest Database tables and fields HostdiscoveryoptionHostdiscoveryreqgroup Database tables and fields Hostdiscoveryrequest HypervvirtualmachineInterface HypervvmhbaportmapIFL Ipdevicelicense InterfacedeploymentconfigDatabase tables and fields Interface Ipportgroup Database tables and fields IpdevicelicenseIpinterface Ipxnetworkvlan IprouteIpsubnetvlan ISLDatabase tables and fields ISL SourceswitchportidTargetswitchportid IslconnectionSourcemasterport IsltrunkgroupMasterconnectionid TargetmasterportKeyvault L2ACCESSCONTROLENTRYIsltrunkmember L2ACLDEVICEDEPLOYMAP Database tables and fields L2ACCESSCONTROLENTRYL2ACCESSCONTROLLIST L2ACLINTERFACEDEPLOYMAPL3ACLDEVICEDEPLOYMENTMAP Database tables and fields L2ACLINTERFACEDEPLOYMAPL2NEIGHBOR L3ACLINTDEPLOYMENTMAPLagmember LAGDatabase tables and fields L3ACLINTDEPLOYMENTMAP Launchincontextmodule LastconfigupdatetimeDatabase tables and fields Lagmember Licensedowngradedetails LicenseDatabase tables and fields Launchincontextmodule Database tables and fields Licensedowngradedetails LicensefeaturemapLicensedfeature LicenseruleLsandevice LsantagconfigLock LsanproxydeviceLsanzonemember LsanzonedbconfigLsanzone MctclientMacfilterintdeploymentmap Database tables and fields MacfilterMacfilterdevdeploymentmap MacgroupMacgroupmember MacgroupMapsevent ManagedelementMapseventcauseaction Database tables and fields MapseventMapseventdetails Measure MapspolicyMarchingants Migrationhistory ModuleMessagerecipient Database tables and fields Module Mplslsp MplsadmingroupMplsadmingroupinterfacerelation ModuleslotpresentMplsrsvplsp MplspathMplspathhop Database tables and fields Mplsrsvplsp MplsrsvplspadmingroupMplsrsvplspadmingroupcontainer MplsrsvplspactuallyroutedhopMplsrsvplspfrrparameters MplsrsvplspparametersMplsrsvplsppath MplsserviceDatabase tables and fields Mplsrsvplspparameters MplsrsvplsptunnelresourceMplsserviceendpointrelation Database tables and fields MplsserviceMplsservicedevicerelation Mrpring Database tables and fields MplsserviceendpointrelationMplsservicepeerrelation MrpringdeviceDatabase tables and fields Mrpringdevice Networkscopetype N2FPORTMAPNetworkvlan NicprofileDatabase tables and fields Nportwwnmap NpflowdefinitionOuiguesseddevicemap Database tables and fields NpflowdefinitionNpsubflow Ouivendor PasswordhistoryPbrinterfaceconfig PerfcollectorPbrnexthop PbrpolicyPbrrule PbrruleacllistPhysicaldevice Database tables and fields PbrruleacllistPhantomport Database tables and fields Physicaldevice PhysicalinterfaceDatabase tables and fields Physicalinterface PmcollectormeasuresettingPmcollectortargetsetting PhysicalportPmdashboardwidget Database tables and fields PmcollectortargetsettingPmcollectortimeseriesmapping Database tables and fields Pmdashboardwidget PmdatacollectorPmstatsagingpolicy PmmeasureDatabase tables and fields Pmdatacollector Pmwidgetmonitortype PmwidgetmeasuretypePmwidgetmeasuretypeentry PmwidgettargetentryPmwidgetuserentry Database tables and fields PmwidgettimeseriesentryPmwidgettopncollectorentry PoethresholdPolicyrule Database tables and fields PoethresholdPoethresholdevent PolicyrulemapPortcommissioncimomserver PortbottleneckconfigPortbottleneckstatus Portfencingpolicymap Database tables and fields PortcommissioncimomserverPortfencingpolicy Portprofiledomain Database tables and fields PortfencingpolicymapPortprofile Portprofilemacmap PortprofiledomainmapPortprofileinterfacemap PortprofileqosmapPortprofileqospfcmap PortprofilevlanmapPortvlan Productapp PrivilegeDatabase tables and fields Portvlan Qrtzcalendars ProtocolvlanQrtzblobtriggers QrtzcrontriggersQrtzjoblisteners QrtzlocksQrtzjobdetails QrtzpausedtriggergrpsQrtzjtriggerlisteners Database tables and fields QrtzschedulerstateQrtzsimpletriggers QrtztriggersQuerybaseddevicegroup RecoverycardgroupmappingRaslog QuorumcardgroupmappingReportdrilldowntemplate ReporttypeReporttemplate ResourcefabricmapRoleprivilegemap RoleResourcehostmap RuleblockmapSanconnection SANRulelogicalexpressionmap Securitypolicy ScomhostDatabase tables and fields Sanconnection Sensorid SensorSelectedflyoverproperty CurrentreadingSflowcheckpoint SflowhoursummarySrcmac InpriorityOutpriority L3SRCADDRSflowiprouteinfo SflowminutebgpSFLOWMINUTEL3SLNUM Database tables and fields SflowminutebgpSflowminutebgpslnum SflowminutemacSflowminutesummary Database tables and fields SflowminutemacSflowminutemacslnum SflowminutevlanSFLOWREPORTL3SOURCE Database tables and fields SflowminutevlanSflowminutevlanslnum SFLOWREPORTL4SOURCEDatabase tables and fields Sflowstaging Smartcard SflowstagingslnumSnapshotproductstatus Database tables and fields SmartcardSmiasanname SnmpcredentialsSnmpdata Database tables and fields SnmpcredentialsSNMPDATA2HOUR Database tables and fields SnmpdataSNMPDATA1DAY MibindexSNMPEXPRDATA1DAY SNMPDATA30MINSnmpexprdata Snmpexpression Database tables and fields SNMPEXPRDATA1DAYSNMPEXPRDATA30MIN SnmpprofileWritecommunitystring Database tables and fields SnmpprofileReadcommunitystring Sourceobjecttype SnmptrapcredentialSNMPV3FORWARDINGCREDENTIAL SslcertificateSslcertificatevipservermap SslkeyDatabase tables and fields Sslcertificate Statsaging SslkeypasswordDatabase tables and fields Sslkey StpportStpinstance StpportDatabase tables and fields Stpinstance SwitchbottleneckconfigSwitchlicense SwitchconfigSwitchconfigdetail FieldSwitchmodel SwitchportDatabase tables and fields Switchport Islrrdyenabled NpivenabledFcfastwriteenabled QosenabledLogicalportnumber DefaultareaidEportdisabled LogicalportwwnSwitchportperformance Database tables and fields Switchportperformance Systemproperty SwitchthresholdsettingSystemcardenginemapping TargettypeTimeseriesdata ThresholdmeasureThresholdpolicy TIMESERIESDATA1DAYTABLE\399 TIMESERIESDATA30MIN Database tables and fields TIMESERIESDATA1DAYTIMESERIESDATA2HOUR Sumvalue TIMESERIESDATA1TIMESERIESDATA11DAY TIMESERIESDATA130MIN Database tables and fields TIMESERIESDATA11DAYTIMESERIESDATA12HOUR MinvalueDatabase tables and fields TIMESERIESDATA130MIN TIMESERIESDATA2TIMESERIESDATA21DAY TIMESERIESDATA22HOURTIMESERIESDATA3 Database tables and fields TIMESERIESDATA22HOURTIMESERIESDATA230MIN TIMESERIESDATA32HOUR Database tables and fields TIMESERIESDATA3TIMESERIESDATA31DAY Database tables and fields TIMESERIESDATA32HOUR TIMESERIESDATA330MINTIMESERIESDATA4 TIMESERIESDATA41DAYTIMESERIESDATA42HOUR TIMESERIESDATA430MINTrill ToolappToolpath Database tables and fields TIMESERIESDATA430MINTrunkgroupinterface TrilltrunkgroupTrilltrunkmember User TrunkgroupmemberUserdefineddevicedetail Database tables and fields UserUseraormap UserdefinednetworkscopeUserpreference UserrealtimemeasuresettingContent UserrealtimemeasuremappingUserstatemap UserresourcemapUserrolemap VportdetailVcnmember VcnpeerVcemprofile VcnpeerVcsclustermember Vipserverbinding Database tables and fields VcemprofileVipserver VirtualcircuitinterfaceVirtualfcoeportstat VirtualfcoeportVirtualfcoeportmacmember Database tables and fields Virtualfcoeportstat VirtualportwwndetailsVirtualswitch Database tables and fields VirtualportwwndetailsDatabase tables and fields Virtualswitch DOMAINMODE239 FcoeloginenabledInsistentdidmode DomainidoffsetCLUSTER1 Vcsid HifenabledMapsenabledactions MonitoredVlan Vlanintctagrelation VlaninterfacememberVlaninterfacerelation VlanintmacgrouprelationVllendpointrelation VmotioneventVmdatacenter Database tables and fields VmotioneventVmotionpnicdetails VmdatastoredetailsVmdvport Database tables and fields Vmdvport VmdvportgroupVmdvswitch Database tables and fields VmdvportgroupVmfchba Database tables and fields VmdvswitchVmdvswitchhostmember Vmfchbadeviceportmap VmhostDatabase tables and fields Vmfchba Vmhostenddevconnectivity VmhostproxyswitchDatabase tables and fields Vmhost Vmhostvirtualnic Database tables and fields VmhostproxyswitchVmhostproxyswitchpnicspec Vmnicteamingpolicy VmnetworksettingsDatabase tables and fields Vmhostvirtualnic Vmpath Database tables and fields VmnicteamingpolicyVmphysicalnic Database tables and fields Vmphysicalnic VmsecuritypolicyVmstdvswitchportgroup VmstandardvirtualswitchVmstandardvswitchport Database tables and fields Vmstdvswitchportgroup VmstorageVmtrafficshapingpolicy VmvcenterVmstoragehbaremoteportmap Vmvirtualethernetadapter Database tables and fields VmvcenterVmvcentermember Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Vplsdevicerelation Database tables and fields VmvirtualmachineVmvirtualmachinedatastoremap VplsendpointrelationVrconnfcconnection VrconndomainVrconndomaingroup Vrconnmodule VrconnmoduleportVrconnwwn WirelessproductdetailsVrconnserverprofile Zone WirelessproductrelationWtarchive Zonealiasmember ZonealiasZonealiasinzone ZonedbZonedbusers ZonedbconfigZonedbcontent ZONEIN-ZONESETAgconnectioninfo AdapterportconfiginfoViews ViewsCnaportdetailsinfo BootimagefiledetailsinfoCnaethportconfiginfo CNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS CNAETHPORT.MTU CNAPORT.ALARMWARNINGCnaportinfo Coreswitchdetailsinfo CORESWITCH.IDCryptohostluninfo CORESWITCHDETAILS.DESCRIPTIONCoreswitch Left Outer Join Coreswitchdetails Cryptolun LUN, CryptohostDashboardpreferencesinfo CRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, CryptoswitchCryptotargetengineinfo DASHBOARD.CREATEDBYDeploymentlog DeploymentconfigurationDeploymentinfo Deviceconnectioninfo EEMONITORSTATS2HOURINFO EEMONITORSTATS5MININFOEEMONITORSTATS30MININFO EEMONITORSTATS1DAYINFOTEPORTSTATS5MININFO TEPORTSTATS30MININFOTEPORTSTATS2HOURINFO TEPORTSTATS1DAYINFOCORESWITCH.MAXVIRTUALSWITCHES SwitchinfoCORESWITCH.IPADDRESS Deviceinfo CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, FabricVIRTUALSWITCH.CORESWITCHID = CORESWITCH.ID DEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS DEVICENODE.SIMULATEDDEVICEPORT.NUMBER DEVICEPORT.PORTID N2FPORTMAPINFO DEVICENODE.FABRICID = SWITCHINFO.FABRICIDN2FPORTMAP Switchport Agnport Switchport Agfport DevicenodeinfoDeviceportinfo DevicenodeDeviceport DevportgigeportlinkinfoDEVICENODE.FDMIHOSTNAME DEVICEPORTGIGEPORTLINK.DIRECTATTACHIslinfo DevportmacaddrmapinfoIslconnectioninfo ISL.DESTPORTNUMBER Eventdetailsinfo DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.IDEthernetislinfo FABRIC.ID = ISL.FABRICIDEventinfo Fabricinfo FCIPTUNNELCIRCUIT.DSCPDATA FciptunnelcircuitinfoFABRICMEMBER.FABRICID = FABRIC.ID FCIPTUNNEL.DSCPCONTROL FciptunnelinfoFciptunnelcircuit Fcoedeviceinfo FruinfoGigeportecloudlinkinfo Gigeportinfo Gigeport Switchport CoreswitchHBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATE HbaportdetailsinfoHBAPORTDETAIL.PREBOOTDISABLED HBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOSHBATARGET.DEVICEPORTID HbatargetinfoHbaport HBATARGET.TRUSTEDHBAREMOTEPORT.CURRENTSPEED HealthstatusinfoHBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTID HBAREMOTEPORT.IOLATENCYAVERAGEHOSTDISCOVERYOPTION.VMPORT HostdiscoveryrequestinfoHOSTDISCOVERYREQUEST.ID DEVICEENCLOSURE.TYPEHOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID IflinfoHostdiscoveryrequest Isltrillinfo DESTDEVICE.MANAGEDELEMENTID AS Destmeid IsltrunkgroupmemberinfoISL.DESTDOMAINID ISL.DESTPORTNUMBER ISL Device VcsdeviceIsltrunkinfo Mapseventdetailsinfo ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHIDL2NEIGHBORINFO L2NEIGHBORModuleinfo TEMPMODULE.MODULEID TEMPMODULE.NUMPORTSPHYSICALDEVICE.DEVICEID NportwwnmapinfoMODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENT FOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUMPhantomportinfo ProductinfoTEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLB TEMPDEVICE.FABRICWATCHSTATUSTEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESS LastseentimestampTEMPDEVICE.FIRSTSEENTIME TOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS asPortgroupinfo PortbottleneckconfinfoPortbottleneckstatinfo Roleprivilegeinfo PortprofileinfoPORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODE PortprofileinterfaceinfoPortprofilemacinfo PortprofileSflow PortvlaninfoProtocolvlaninfo Scomeemonitorinfo SFLOWMINUTEL3VIEWSflowminutemacview SOURCEPORT.ID = EEMONITOR.SOURCEPORTID SensorinfoEemonitor Smartcardusageinfo SWITCHCONFIG, Switchconfigdetail SwitchconfiginfoSwitchdetailsinfo SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGIDVIRTUALSWITCH.FMSMODE VIRTUALSWITCH.MANAGEDELEMENTID CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, CoreswitchdetailsSWITCHPORT.ID SwitchdiscoveredmacinfoSwitchportinfo DEVICE.IPADDRESS, DEVICE.DEVICEIDCORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo Timeseriesdataview TIMESERIESDATA12HOUR.MEASUREIDFrom timeseriesdatainfo tsd Union ALLTrillinfo Virtualfcoeportinfo TrilltrunkinfoUserroleresourceinfo Virtualportwwndetailsinfo CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.IDVIRTUALPORTWWNDETAILS.SWITCHID VirtualportwwndetailsDEVICE.DEVICEID VmaddressinfoVlanintclassifierinfo VLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBIDDEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.ID VmconnectivityinfoMACGROUP.ID INTERFACE.DEVICEID = DEVICE.DEVICEIDVMPATH.HBAPORT = DEVICEPORT.WWN DEVICEENCLOSURE.ID AS HostdbidVmnetworkconnectivityinfo VMHOSTENDDEVCONNECTIVITY.INTERFACEID VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHIDPnicmac DEVICE.MANAGEDELEMENTIDSwitchname VMHOST.DEVICEENCLOSUREIDVmpath Vmvirtualmachine VmdatastoredetailsinfoVmeemonitorinfo VMPATH.HBAPORTBPCHAR = SOURCEPORT.WWNVmhostinfo VmluninfoVmstatisticsinfo VMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN SWITCHPORT.PORTID SWITCHPORT.PORTNUMBERSWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOK VRCONNDOMAIN.FIRMWAREVERSION VrconnmoduleinfoVRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINID VCEMPROFILE.DISCOVERYSTATUSUnion Select distinct VRCONNMODULE.ID Vrconnmoduleportinfo VrconnnpivinfoUSERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS VmmdiscoveredmacinfoDEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAME Vmvirtualethernetadapterinfo Apusage ZONEDB.ID = ZONEDBCONFIG.ZONEDBIDZonedbinfo EventsPhysicaldeviceinfo SflowminutebgpviewSflowminutevlanview Snmpdatainfo SlotinfoManagedelementinfo Snmpexprdatainfo SnmpdataviewWhere sw.id = sp.virtualswitchid = de.managedelementid Vmvnetworkinfo Device PHYSICALINTERFACE, PhysicalportVcsclustermemberinfo Trilltrunkgroup Resetvcslicensed$BODY$ Wirelessinterface SelectWiredinterface Deviceipaddress CeeportinfoL3.SUBNETMASK CEEPORT.AMPPPROFILEMODECEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Ampp Access levels definedIndex EMC, 354 HP LAN, 355 IBM CNACUP, Ficon Hosts, 1011692 53-1003056-01 Gslb FiconFTP State, 102 Monitor MstpColumns, 284 product overview, 453 products New device, adding nameNOS Rbac1043 SVI 1699 Edit, 880 WWN1701