Brocade Communications Systems IP250 CLI Templates MCT Cluster Deletion, MCT Client Creation

G	CLI Templates
		TABLE 31	MCT Cluster Deletion
		Feature	Description	CLI Commands
		MCT	Delete cluster.	no cluster $<CLUSTER_NAMESTRING>
				$<CLUSTER_IDINTEGER>
				no vlan $<SESSION_VLANINTEGER>
				no vlan $<KEEP_ALIVE_VLANINTEGER>
		TABLE 32	MCT Client Creation
		Feature	Description	CLI Commands
		MCT	Create a cluster client.	cluster $<CLUSTER_NAMESTRING> $<CLUSTER_IDINTEGER>
				client $<CLIENT_NAMESTRING>
				rbridge-id $<CLIENT_RBRIDGE_IDINTEGER>
				client-interface ethernet $<CLIENT_PORTSLOT_PORT>
				deploy
		TABLE 33	MCT Client Deletion
		Feature	Description	CLI Commands
		MCT	Delete a cluster client.	cluster $<CLUSTER_NAMESTRING> $<CLUSTER_IDINTEGER>
				no client $<CLIENT_NAMESTRING>
		TABLE 34	MPLS – Loopback Interface Configuration
		Feature	Description	CLI Commands
		MPLS	Loopback interface configuration	! Required for LSP egress address in LSP Manager as well as a
			used for device reachability using	soft interface for IP routing
			OSPF. It assigns an IP address and	interface loopback $<LOOPBACK_INTERFACEINTEGER>
			advertises the interface through	enable
			OSPF.	ip ospf area $<OSPF_AREAINTEGER>
				ip address $<LOOPBACK_INTERFACE_IPSTRING>
		TABLE 35	MPLS – Core Interface Configuration
		Feature	Description	CLI Commands
		MPLS	MPLS core interface configuration	! Core facing interfaces need IP address for MPLS
			such as assigning an IP address and	! Repeat the following commands for all MPLS core interfaces in
			advertising using OSPF	the product

interface ethernet $<CORE_INTERFACE_1SLOT_PORT> enable

ip ospf area $<OSPF_AREAINTEGER>

ip address $<CORE_INTERFACE_1_IPSTRING> router mpls

mpls-interface ethernet $<CORE_INTERFACE_1SLOT_PORT>

1344	Brocade Network Advisor IP User Manual
	53-1003056-01