Brocade Communications Systems IP250 - page 880

828 Brocade Network Advisor IP User Manual
53-1003056-01
Port VLANs
27
4. Click the Load Products button. Products that already have the entered VLAN IDs configured on
them are automatically moved to the Selected Products list. The Load Products button is
disabled by default.
5. Under the Available Prod ucts list, select one or more products to which the VLAN will be
assigned. You can also use the Search tool to find ports.
6. Click the right arrow button to move your selection to the Selected Products list.
7. Expand the folder for a selected product in the Available Ports list to display all the interfaces
or trunk groups on the product that can be added to the VLAN.
The Selected Ports list displays the list of configured VLANs. Initially, these VLANs contain no
ports. If no ports or trunk groups are selected, an empty VLAN is created on the products (DCB
and Network OS products).
8. In the Available Po rts list, select the interfaces that you want to assign to a VLAN.
If you place your pointer over an interface in the Available Ports list, a tooltip appears, showing
the VLAN assignment of the interface. You can also use the Search toolbar to search for ports
under the Available Por ts list, then assign the ports found to the VLAN.
9. In the Available Po rts list, select the port-channel that you want to assign to a VL AN.
10. I n the Select VLANs list, select the VLAN you want to assign to the selected interfaces. The list
includes the default VLAN (VLAN1) and the VLAN or VLANs you are currently creating. You can
assign one or more VLANs to the selected ports.
In the Selected Ports list, each VLAN node is shown as Tagged, Untagged, or Dual Mode. If a
port is already tagged in one VLAN, it can be marked as Tagged in other VLANs. The port can
also be marked as Untagged in other VLANs, which changes its mode to Dual Mode. Dual
Mode is not supported on Network OS products.
11. Complete one of the following tasks:
•If you want to assign the interface to the VLAN as an untagged port, select Type as Tagged
and click right arrow button.
•If you want to assign the interface to the VLAN as a tagged port, select Type as Untagged
and click right arrow button.
•If you want to make the VLAN on the interface dual mode, assign that interface as tagged
and select the same interface and assign as untagged to another VLAN. Dual mode ports
can be added to any VLAN except for the default (VLAN 1).
12. Add a cTag by completing the following steps.
a. Select the port from the Available P orts list.
b. From the VLAN ID folder, select a VLAN ID greater than 4096.
c. From the Type list, select Tagged.
The cTag classifier list is enabled.
d. Enter the valid cTag ID (from 2 through 4094) and click the right arrow.
13. Click the Select Classifiers button to launch the Select Classifier Groups dialog box, shown in
Figure 322, where you can assign classifiers and rules for supported DCB and Network OS
platform-based VLANs.