Brocade Communications Systems IP250 user manual Editing system collectors, Name Collector Basics

33 IP historical performance monitoring

“Adding third-party device MIB objects manually” “IP performance monitoring and traffic analysis” “IP configuration requirements”

“IP real-time performance monitoring” “IP Custom performance reports” “IP sFlow configuration”

“IP Traffic analyzer monitoring and sFlow reports” “IP traffic accounting”

Using Flow Vision dialog box options

Editing system collectors

Subject to the following restrictions, you can edit system collectors using the Data Collector wizard (refer to “Adding or editing a historical data collector” on page 998).

You can modify the following attributes:

•Enable/disable settings - Collector Basics page

•Target selection - Select Source page

•Threshold and Rearm settings - Threshold and Rearm page

You cannot modify the following attributes:

•Name - Collector Basics page

•Device or port level - Collector Basics page

•Polling interval - Collector Basics page

•Schedule setting - Collector Basics page

•MIB selection - MIB Object page

•Expression selection - Expression page

•MIB index - MIB Index page

NOTE

The MIB Index page for system collectors will not show because you cannot configure the MIB index for system collectors.

Displaying historical data collectors

Select Monitor > Performance > Historical Data Collectors to display configured historical data collectors.

996	Brocade Network Advisor IP User Manual
	53-1003056-01