Brocade Communications Systems IP250 user manual IP sFlow configuration Click Next

IP sFlow configuration 33

2.Click Next.

The Interface Payload - sFlow Settings dialog box displays.

FIGURE 423 Interface Payload - sFlow Settings dialog box

3.Under Global Settings, select Enable to have the sFlow report enabled when it is deployed. Select Disable to deploy the sFlow report as initially disabled.

4.Use the Rate Sampling selector to choose either Adaptive or Custom sampling.

If you choose Adaptive, the management server selects the sampling interval and traffic sampling rate. The sampling rate is the ratio between the total number of incoming packets and the number of flow samples taken at the product level. When Adaptive is chosen, the sampling rate is based on interface speeds as shown in Table 90 on page 1021.

TABLE 90 Interface Payload

Interface Speed	Sampling rate
10 Mbps	256
100 Mbps	512
1 Gbps	1024
10 Gbps	2048
100 Gbps	8192

Brocade Network Advisor IP User Manual	1021
53-1003056-01