Brocade Communications Systems IP250 user manual Editing Host adapter credentials

3 Host discovery

12.Click OK on the Add Host Adapters dialog box.

If an error occurs, a message displays. Click OK to close the error message and fix the problem.

A Host Group displays in Discovered Hosts table with pending status. To update the status from pending you must close and reopen the Discover Host Adapters dialog box.

13.Click Close on the Discover Host Adapters dialog box.

Editing Host adapter credentials

To edit Host credentials, complete the following steps.

1.Select Discover > Host Adapters.

The Discover Host Adapters dialog box displays.

2.Select the Host in the Discovered Hosts list and click Edit. The Edit Host Adapters dialog box displays.

FIGURE 49 Edit Host Discovery dialog box

3.Configure Host credentials by choosing one of the following options:

•To configure HCM agent credentials, select the HCM agent option. Go to step 5.

•To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with step 4.

If you do not need to configure Host credentials, skip to step 8.

4.Configure discovery authentication by choosing one of the following options:

•To configure discovery with authentication, select the HTTPS from the Protocol list.

•To configure discovery without authentication, select the HTTP from the Protocol list.

5.Enter the port number in the Port field.

HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is 5988.

6.Enter your username in the User ID field.

HCM agent default is admin. Leave this field blank for the CIM server.

7.Enter your password Password field.

HCM agent default is password. Leave this field blank for the CIM server.

8.Click OK on the Edit Host Adapters dialog box.

If an error occurs, a message displays. Click OK to close the error message and fix the problem.

9.Click Close on the Discover Host Adapters dialog box.

100	Brocade Network Advisor IP User Manual
	53-1003056-01