Brocade Communications Systems IP250 user manual Viewing existing policy monitors

Viewing existing policy monitors 36

Viewing existing policy monitors

To view existing policy monitors, complete the following steps.

1.Select Monitor > Policy Monitor (Figure 458). The Policy Monitor dialog box displays.

FIGURE 458 Policy Monitor dialog box

2.Review the policy monitor details:

•Name — The user-defined name of the policy.

•Description — A description of the policy.

•Alert — Select to receive e-mail alerts and have the policy monitor status icon display in the Status bar when the monitor fails or partially fails.

•Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy is scheduled.

•Next Run — The time the policy will run again.

•Last Run — The time the policy ran last.

•Result — The result of last policy monitor run. There are four possible results: Passed, Partially Failed, Failed, and Not Applicable.

•Acknowledged — Whether the policy is acknowledged or not. Select the check box to acknowledge the policy. Disabled when the associated Alert check box is cleared.

3.To add a policy monitor, click Add (refer to “Adding a policy monitor” on page 1108).

4.To edit the selected policy monitor, click Edit (refer to “Editing a policy monitor” on page 1115).

5.To delete the selected policy monitor, click Delete (refer to “Deleting a policy monitor” on page 1115).

6.To run the selected policy and view the report, click Run (refer to “Running a policy monitor” on page 1135).

Brocade Network Advisor IP User Manual	1107
53-1003056-01