Brocade Communications Systems IP250 Payload name Description Product Payloads, Dns

24 Payloads

Payloads

Payloads are defined as product payloads or interface payloads. Product payloads are deployed to the devices, whereas interface payloads are deployed to ports.

The available payloads are listed in Table 79.

TABLE 79	Payloads available for deployment
Payload name		Description
Product Payloads:
802.1Q Tag Type		Sets the tag type, or tag ID, that identifies the aggregate VLAN.
Banners		Displays messages when a user logs in to a device at a Privileged EXEC CLI
		level, or when a user accesses a device using Telnet or Secure Shell.
Boot Sequence		Specifies the sources from which the device will boot.
CLI Configuration		Deploys CLI configuration definitions that have been created in the CLI
		Configuration Manager to wired devices.
CLI Product Monitoring		Deploys CLI product monitoring definitions that have been created in the CLI
		Configuration Manager to wired devices.
DNS		Defines a domain that serves as a gateway to the DNS (Domain Name Server).
DNS Name Search List		Creates a list of DNS names and adds, deletes, or replaces target products that
		match the names in the list.
Enable Passwords		Assigns passwords to management privilege levels on the IOS device.
FDP Settings		Enables IOS devices to advertise themselves to other IOS devices on the
		network.
Image Update: Boot		Deploys boot and monitor images to devices.
Image Update: Software		Updates the software image file on a device.
Firmware Image Update:		Updates the unified firmware image file on a device.
Unified
LDP Settings		Configures LDP settings on a product.
Protocols		Enables or disables routing protocols on devices.
		This payload cannot be deployed to non-IP IOS devices.
RADIUS Parameters		Specifies the number of times an IOS device can resend an authentication
		request and wait for a response from the RADIUS server.
RADIUS Servers		Indicates which RADIUS servers are used for authentication.
Reload Products		Reloads selected products at one time.
SNMP Community Strings		Configures SNMP v1 and V2 community strings.
SNMP Identification		Sets the contact, location, and system name information about a product.
SNMP Trap Enable		Configures which standard traps are sent to trap receivers by the product.
SNMP Trap Receivers		Defines the trap receivers for a product.
SNMP V3 Settings		Defines the user accounts that can access the product using SNMP v3.
Syslog Receivers		Defines the systems that have been identified to receive system log events.
TACACS+ Parameters		Configures the TACACS/TACACS+ retransmit, timeout, and dead time
		authentication parameters.

766	Brocade Network Advisor IP User Manual
	53-1003056-01