Brocade Communications Systems IP250 user manual IP device properties

E	IP device properties
		Field/Component	Description
		Location	The physical location of the product.
		Contact	The name of the person or group you should contact about the product.
		Description	The description of the product.
		Connected AP count	Number of APs connected to the controller or switch.
		Managed AP count	Only applicable to the selected controller. Number of APs that the
			selected controller manages.
		Controller cluster mode	Only applicable to the selected controller. Cluster mode of the controller:
			Active, Standby and None.
		Controller cluster name	Only applicable to the selected controller. Cluster name.
		Controller cluster members	Only applicable to the selected controller. IP addresses of the controller
			cluster peers.
		Cluster (MCT switches only)	The cluster details of the Multi-Chassis Trunk (MCT) switch. MCT cluster
			details include:
			• Cluster ID — The MCT cluster ID.
			•	Cluster Name — The MCT cluster name.
			•	Cluster RBridge ID — The RBridge ID of the MCT cluster.
			•	Cluster State — Whether the MCT cluster is deployed or undeployed.
			•	Isolation Mode — Whether isolation mode is loose or strict.
			•	Active Member VLAN Range — The active member VLAN for data.
			•	Configure Member VLAN Range — The configured member VLAN for
			•	data.
				Keep Alive VLAN — An alternate VLAN for Cluster Communication
			•	Protocol (CCP) when the Inter-Chassis Link (ICL) is down.
				Session VLAN — The VLAN used by the cluster for control
			•	operations.
				ICL Name — The ICL name.
		Cluster Peer (MCT switches only)	The cluster peer details of the MCT switch. MCT cluster peer details
			include:
			• Peer Product — The name and IP address of the MCT peer product.
			•	Peer IP Address — The VE interface IP address of the MCT peer.
			•	Peer RBridge ID — The RBridge ID of the MCT peer.
			•	ICL Name — The name of the ICL used to reach the MCT peer.
			•	Keep Alive Interval — The interval time for CCP over the keep-alive
			•	VLAN.
				Hold Time — The hold-time before making the CCP down state when
			•	the ICL goes down.
				Fast Failover — Whether fast failover is enabled or disabled.
			•	Active VLAN Range — The active member VLAN for data.
			•	Peer State — Whether the peer state is CCP up or CCP down.
			•	Peer State Up Time — How long the peer has been up.
			•	Peer State Down Reason — The reason the peer is down.
		Add button	Click to add a user-defined property. For more information, refer to
			“Adding a property field” on page 1329.
		Edit button	Click to edit a user-defined property. For more information, refer to
			“Editing a property field” on page 1330.
		Delete button	Click to delete a user-defined property. For more information, refer to
			“Deleting a property field” on page 1330.

1316	Brocade Network Advisor IP User Manual
	53-1003056-01