Brocade Communications Systems IP250 user manual Viewing port groups, Select Configure Port Groups

21 Port groups

Creating a port group

NOTE

At least one switch must be reachable to create a port group.

To create a port group, complete the following steps.

1.Select Configure > Port Groups.

The Port Groups dialog box displays, as shown in Figure 262 on page 718.

FIGURE 262 Port Groups dialog box

2.Click New.

3.Enter a name for the port group in the Name field.

4.Enter a description for the port group in the Description field.

5.Select one or more ports to add to the group in the Group Type - FC Ports list.

A port group must have at least one port in the Membership List. All ports must be from switches in the same fabric.

6.Click the right arrow button.

The selected ports display in the Membership List.

7.Click Update.

The new port group displays in the Port Groups list.

8.Click OK to close the Port Groups dialog box.

Viewing port groups

To view port groups, complete the following steps.

718	Brocade Network Advisor IP User Manual
	53-1003056-01