Brocade Communications Systems IP250 user manual Top Port Utilization Percentage monitor

7 Performance monitors

•Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) — Displays one of the following:

-Connected Port — The ISL or IFL port on the connected device. Click to launch the switch port properties dialog box.

-Initiator — The initiator port on the connected device. Click to launch the device properties dialog box.

-Target — The target port on the connected device. Click to launch the device properties dialog box.

•Underflow Errors— The number (error count) of underflow errors for the duration specified in the monitor.

•Underflow Errors/sec — The number (error rate) of underflow errors per second for the duration specified in the monitor.

•Product — The product affected by this monitor.

•Type — The type of port (for example, U-Port).

•Identifier — The port identifier.

•Port Number — The port number.

•State — The port state (for example, Enabled).

•Status — The port status (for example, Up).

•Refreshed — The time of the last update for the monitor.

To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on page 263.

Top Port Utilization Percentage monitor

The Top Port Utilization monitor (Figure 103) displays the top port utilization percentages in a table.

FIGURE 103 Top Port Utilization monitor

The Top Port Utilization monitor includes the following data:

•Severity icon/monitor title — The worst severity of the data shown next to the monitor title.

•Port — The port affected by this monitor.

254	Brocade Network Advisor IP User Manual
	53-1003056-01