Brocade Communications Systems IP250 user manual Configuring a one-time discovery schedule

IP discovery profiles 3

Configuring a one-time discovery schedule

To configure a one-time discovery schedule, complete the following steps.

1.Select One Time from the Frequency list.

FIGURE 28 Scheduling tab - One Time

2.Select the time of day you want discovery to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

3.Click the Date list to select a date from the calendar.

4.Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.

5.To finish configuring the discovery schedule, return to “Scheduling discovery” on page 72.

Configuring an hourly discovery schedule

To configure an hourly discovery schedule, complete the following steps. 1. Select Hourly from the Frequency list.

FIGURE 29 Scheduling tab - Hourly

2.Select the minute past the hour you want discovery to run from the Minutes past the hour list. Where the minute value is from 00 through 59.

3.To finish configuring the discovery schedule, return to “Scheduling discovery” on page 72.

Brocade Network Advisor IP User Manual	73
53-1003056-01