Cisco Systems IPMUX-1E Protection Switching Configuration, None, Disable, Immediate Msec to 1 sec

IPmux-1/1EInstallation and Operation Manual Appendix E Configuration Menus

Protection Switching Configuration

Main Menu

↓

2.Configuration

↓

3.Connection Configuration

↓

5.Protection Switching Configuration

	PROTECTION SWITCHING CONFIGURATION
1.	Primary Bundle ID	Empty!
2.	Secondary Bundle ID	Empty!
3.	Redundancy Type	Empty!
4.	TDM Fail Time	Empty!
5.	Event Threshold Window (sec)	Empty!
6.	Sequence Number Threshold (0=Disable)	Empty!
7.	Underflow/Overflow Threshold (0=Disable)	Empty!
8.	Local Fail Time (msec)	Empty!
9.	Force Connection	Empty!
A. Recovery		Empty!
B. Wait-To-Restore Time (sec)		Empty!

ESC. Exit

Figure E-33. Protection Switching Configuration Menu

Table E-21. Protection Switching Configuration Parameters

Parameter	Possible Values	Remarks
Primary Bundle ID	1, None
Secondary Bundle ID	1, 2, None
Redundancy Type	1+1	Only one bundle is transmit
	1:1	Both bundles are transmit
		Note: For 1:1, OAM Connectivity must be enabled in
		the Bundle Configuration menu.
TDM Fail Time	Disable, Immediate,
	100 msec to 1 sec
Event Threshold Window	1 to 1000	Relevaqnt for Sequence Number Threshold and
		Underflow/Overflow Threshold.
Sequence Number	1 to 1000	Redundancy will flip when this amount of sequence
Threshold		numbers is exceeded within the threshold window
Underflow/Overflow	1 to 1000	Redundancy will flip when this amount of
Threshold		underflow/overflow events is exceeded within the
		threshold window
Local Fail Time	2 to 1000	Redundancy will flip when the period is exceeded

Connection Configuration: Static Mode E-31