Cisco Systems IPMUX-1E operation manual Connection Configuration CESoIP Mode, Activation Criterion

IPmux-1/1EInstallation and Operation ManualAppendix E Configuration Menus

Activation Criterion

Main Menu	1. Pattern ID	Activation Criterion	1
↓
2. Configuration	2. Tx A		1
↓
3. Connection	3. Tx B		N/C
Configuration	4. Tx C		N/C
↓
3. Activation	5. Tx D		N/C
Criterion
	ESC. Exit	D. Delete	N. Next
	Figure E-36. Activation Criterion Menu
	Table E-23. Activation Criterion Parameters
Parameter	Possible Values	Remarks
Pattern ID	1 to 4	An OR operation will be performed on the pattern
		defined here
		At least one pattern must be defined. For each
		defined pattern at least one bit must be configured
		to either 0 or 1.
Tx A	0, 1	Defines CAS A bit
	N/C	Ignored
Tx B	0, 1	Defines CAS B bit
	N/C	Ignored
Tx C	0, 1	Defines CAS C bit
	N/C	Ignored
Tx D	0, 1	Defines CAS D bit
	N/C	Ignored

Main Menu

↓

2.Configuration

↓

3.Bundle Connection Configuration

E.8 Connection Configuration: CESoIP Mode

To configure the Connection:

1.Select 1 to enter the Connection Mode. Use the <Space bar> to select CESoIP and then press <Enter>.

Connection Configuration: CESoIP Mode E-35