Chapter 3 Operation

IPmux-1/1EInstallation and Operation Manual

 

 

3.3Getting Started

After installation, there are no special operating procedures for IPmux-1/1E. Once it is powered up, the unit operates automatically. The front panel LED indicators (Figure 3-1and Figure 3-3)indicate proper operation. The unit operational status can be monitored constantly.

If required, IPmux-1/1E can be reconfigured. Both the IPmux-1/1E configuration and monitoring operations are performed locally from an ASCII terminal connected to the Control port. Detailed configuration procedures are given in Overview of Menu Operations and Appendix E.

The following functions are supported (see menu trees in Figure 3-5,Figure 3-6,Figure 3-7, Figure 3-8,Figure 3-9,and Figure 3-10):

Viewing system information

Modifying configuration and mode of operation, including setting system default values

Viewing statistics and status.

3.4Overview of Menu Operations

Navigating

Navigate the IPmux-1/1E terminal menus to set and view configuration parameters:

Figure 3-5maps the IPmux-1 terminal menus except for the Connection Configuration menu.

Figure 3-6maps the IPmux-1E ISDN-S terminal menus except for the Connection Configuration menu.

Figure 3-7maps the IPmux-1E FXS/FXO/E&M terminal menus except for the Connection Configuration menu.

Figure 3-8maps the IPmux-1E Connection Configuration menu for Static Mode.

Figure 3-9maps the IPmux-1E Connection Configuration menu for Dynamic CAS Mode.

Figure 3-10maps the IPmux-1E Connection Configuration menu for CESoIP Mode.

Use these menu trees as a reference aid while performing configuration and control functions. Appendix E illustrates menus, explains parameters, and lists default values. Refer to Appendix E to find specific parameters.

3-6 Overview of Menu Operations

Page 85
Image 85
Cisco Systems IPMUX-1E operation manual Getting Started, Overview of Menu Operations, Navigating