Cisco Systems IPMUX-1E operation manual Los End

IPmux-1/1EInstallation and Operation ManualChapter 4 Troubleshooting and Diagnostics

Table 4-1. Event Types (Cont.)

Event	Description	Corrective Action
LOS END	LOS state detected has ended	None
LOS START	IPmux-1 has a LOS (loss of signal) state	1. Check the port cable connection
	on its E1/T1 port	2. Check input signal
PS ACTIVE	IPmux-1/1E power supply unit is	None
	powered on
SN ERRORS END	*Sequence Number ERRORS END	Refer to Bundle Configuration Statistics in
BUNDLE 1		Appendix E
SN ERRORS START	*Sequence Number ERRORS START	Refer to Bundle Configuration Statistics in
BUNDLE 1		Appendix E
SYSTEM USER RESET	IPmux-1/1E was reset by the user	None

*You can configure whether an item will be displayed for each event or every

1 sec / 1 min. For further information see Logfile Events in Appendix E.

Error Detection 4-3