Cisco Systems IPMUX-1 Preliminary Procedure, Before performing Tftp download, Anteappl.cmp

Appendix D TFTP Download Procedures IPmux-1Installation and Operation Manual

Preliminary Procedure

Before performing TFTP download:

1.Ping IPmux-1 from the station running the TFTP server to ensure that IPmux-1 has communication with the machine.

2.Log in as SUPERUSER (su).

3.Edit the file named inetd.conf found at the /etc directory, as follows:

−Search for the line starting with a # sign followed by tftp, for example, # tftp and delete the # sign.

−At the end of that line, there is -S <directory name>.

In <directory name> specify only the path to the file that is to be downloaded to the IPmux-1; for example, /export/home/demo/tftp).

4.Save modified file inetd.conf and INIT the Unix machine; for example, in Solaris type init 0 (not the same for SunOS or IRIX or HP-Unix).

5.After the Station reboots, type ovw & to open HPOV.

6.Open the MIB browser under MISC Æ SNMP MIB BROWSER.

7.Type iso.org.dod.internet.private.enterprises.rad.radGen. agnt.filetranster; The Browse MIB window showing the Agent IP and Server IP addresses is displayed (see Figure D-3).

The fields in are described in Table D-1.

Downloading should take between 60 to 120 seconds.

	Table D-1. Browse MIB Fields
Field	Description
fileServerIP	Specify the IP address of the TFTP server where the software file resides
fileName	Specify the file name containing the new software version, including any path
	to the file. This name must be under the root directory where the TFTP server
	was initiated. The name can be up to 12 characters in length; for example,
	anteappl.cmp
fileTransCmd	Set this parameter to sw download (Entry Number 1) to start software
	download
tftpRetryTimeOut	Specify the desired time interval, in seconds, between retries (default: 15)
tftpTotalOut	Specify the retry duration, in seconds (default: 60)
MIB Instance	Set to 0 (zero)

D-2 Inband TFTP Download Procedure