IPmux-1/1E Installation and Operation Manual Appendix E Configuration Menus
IPmux-1E Configuration E-27
Signaling Profile Configuration SIGNALING PROFILE CONFIGURATION
1. Rx A A
2. Rx B N/C
3. Rx C N/C
4. Rx D N/C
5. Tx A A
6. Tx B 1
7. Tx C 0
8. Tx D 1
ESC. Exit
+------------------------+
| Rx: From Network |
| Tx: To Network |
+------------------------+
Select item from the menu.
Figure E-30. Signaling Profile Configuration Parameters
Table E-18. Signaling Profile Configuration
Parameter Possible Values Remarks
Rx A A, A Inverse, N/C
Rx B B, B Inverse, N/C
Rx C C, C Inverse, N/C
Rx D D, D Inverse, N/C
Specifies which ABCD Signaling Bit (only one), and its polarity,
carries the on hook/off hook information from the far-end device
Tx A A, A Inverse, 0, 1
Tx B B, B Inverse, 0, 1
Tx C C, C Inverse, 0, 1
Tx D D, D Inverse, 0, 1
Specifies which ABCD Signaling Bit carries the on hook/off hook
information to the far-end device.
For example, if Rx = A, then all other Rx must be NC. If Rx = A Inverse, then all
other Rx must be N/C (ignored). Tx can be A, B , 0, 1.
Main Menu
↓
2. Configuration (Analog)
↓
2. Analog Configuration
↓
4. Signaling Profile
Configuration
Note