Cisco Systems IPMUX-1E Set Default Parameters, Figure E-21. Reset Default Warning

Appendix E Configuration Menus IPmux-1/1EInstallation and Operation Manual

Set Default Parameters

Main Menu

↓

2. Configuration

↓

1.General Configuration

↓

6.Set Default Parameters

Setting Default Parameters reconfigures the device according to default parameters. Before overwriting the system, the warning in Figure E-21appears asking you to confirm your selection.

Configuration will be overwritten and system will RESET.

Continue ? (Y/N)

Figure E-21. Reset Default Warning

To overwrite the system and reconfigure it according to default settings:

1.At the prompt (Figure E-21), do one of the following: Type Y.

A prompt appears asking for confirmation.

Are you sure? Y/N

Figure E-22. Reset Confirmation

1. Type Y.

A second prompt appears asking for confirmation (if you have configured the Host):

Save Host Connection? Y/N

Figure E-23. Host Confirmation

2.Perform one of the following: Type Y.

The Default Configuration returns all the Default Settings, except for Host IP, Default Gateway, and Managers.

OR Type N.

The Default Configuration returns all the Default Settings, and deletes the Host IP, Default Gateway, and Managers.

OR

Type N to exit and return to the General Configuration menu.

2. Following this, IPmux-1/1E performs an automatic Reset.

E-16 General Configuration