Cisco Systems IPMUX-1E Manager List, Table E-3. Authentication/Community Parameters, Off

Appendix E Configuration MenusIPmux-1/1EInstallation and Operation Manual

Table E-3. Authentication/Community Parameters

Parameter	Possible Values	Remarks
Authentication	On	On – an authentication-failure trap is generated
Failure Trap	Off	when a system manager attempts to set a
		parameter within IPmux-1/1E with an incorrect
		community value
Trap	Up to 10 alphanumeric characters	The entry is case-sensitive
Read	Up to 10 alphanumeric characters	The entry is case-sensitive
Write	Up to 10 alphanumeric characters	The entry is case-sensitive

Manager List

Main Menu

↓

2. Configuration

↓

1.General Configuration

↓

2.Management Configuration

↓

2.Manager List

The Manager List window parameters are used when IPmux-1 inband management capability is used. The parameters define the parameters for up to eight managers. These parameters are:

•Manager IP address

•Host index

In addition, the Manager List window parameters configure the traps to be received by a manager. The default for all traps is Off.

To access additional manager-list parameters:

•Press <N> to go to the next Manager List window.

		MANAGER LIST
1.	Manager IP Address	192.333.234.172
2.	Link Up/Down Trap	On
3.	Alarm Trap	On
5.	VLAN Tagging
6.	VLAN ID
7.	VLAN Priority

ESC. ExitS. SaveN. Next

Select item from the menu.

Use <Esc> key or keys <1> to <3>

Figure E-14. Manager List Menu

E-10 General Configuration