Cisco Systems IPMUX-1E Erase MAC Table, Vlan Configuration, To erase the MAC Table

IPmux-1/1EInstallation and Operation Manual Appendix E Configuration Menus

Erase MAC Table

Main Menu

↓

2. Configuration

↓

4.Switch Configuration

↓

3.Erase MAC Table

The MAC table is erased automatically every time you change the general operating mode of the switch, or you remove a VLAN membership.

To erase the MAC Table: x

1.On the Switch Configuration menu, select 3. A confirmation line appears.

Traffic will be disrupted. Are you sure?

Figure E-50. Erase MAC Table Confirmation

2. Answer Y to erase the table.

Erasing the MAC table takes about 2 seconds, during which time all traffic through the switch is halted.

VLAN Configuration

Note

Main Menu

↓

2. Configuration

↓

4.Switch Configuration

↓

4.VLAN Configuration

When working in Basic/Rate modes, a warning prints: VLAN tagging must be enabled for VLAN table to take effect.

VLAN CONFIGURATION

VLAN ID	1
Network	No
User1	No

Network VLANs:

User1 VLANs:

Internal VLANS:

ESC. Exit

Select item from the menu:

Figure E-51. VLAN Configuration

Ethernet Configuration/Status – with Ethernet User Port E-53