Cisco Systems IPMUX-1E operation manual Applications, Options

Chapter 1 Introduction IPmux-1/1EInstallation and Operation Manual

•IPmux-1E with E1 interface and an echo canceller Balanced line with an RJ-45 connector Unbalanced line with a mini-coaxial connector (TBNC)

•IPmux-1E with T1 interface and an echo canceller Balanced line with an RJ-45 connector

Unbalanced line with a mini-coaxial connector (TBNC).

An external clock port is optional for IPmux-1/1E (Ordering options).

A user Ethernet interface is optional for IPmux-1/1E (Ordering options).

Options

IPmux-1/1E is a 1U high, easy-to-install standalone unit. A rack mount installation option is available: RM-25 for IPmux-1, and RM-26 for IPmux-1E.

IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available with AC power supply.

Applications

Typical IPmux-1/1E applications are shown with E1/T1, ISDN, and FXS/FXO/E&M interfaces.

Figure 1-1illustrates Multiplexing Voice and Data over an Ethernet link. Figure 1-2shows an E1/T1 circuit extension over an IP/Ethernet Network.

Figure 1-3illustrates mixed ISDN BRI and POTS support application of V5.1 concentration of ISDN BRI remote terminals.

Figure 1-4shows mixed ISDN BRI and POTS support application of Voice Concentration.

Figure 1-5illustrates extending ISDN BRI ports and LAN of a Small Office.

Figure 1-6shows Ethernet-based multi-tenant with voice and data integrated access.

SITE A			SITE B
E1/T1	10/100 Mbps IP/Ethernet 10/100 Mbps		E1/T1
PBX	Network		PBX
	IPmux-1	IPmux-1

Figure 1-1. Multiplexing Voice and Data over an IP/Ethernet Link

1-2 Overview