Cisco Systems IPMUX-1E operation manual Login, Turning IPmux-1/1E Off, User Name and Password

IPmux-1/1EInstallation and Operation Manual Chapter 3 Operation

6.Press <Esc> to open the configuration software.

7.Enter your User Name according to your assigned system privileges (either Supervisor (su) or User and then your Password when prompted (the factory-set password is xxxxxxxxxx).

The Main Menu is displayed (Figure 3-11).

Note If the password is invalid in three consecutive attempts, the system becomes inaccessible for 15 minutes.

Login

User Name and Password

To enter as a superuser:

1.Enter su for User Name.

2.Enter xxxxxxxxxx for Password.

This allows you to configure all the parameters of IPmux-1/1E, and to change the su and user passwords.

To view the unit’s comfiguration:

1.Enter user for User Name.

2.Enter xxxxxxxxxx for Password.

This does not allow you to make configuration changes.

To set all passwords to the default value (xxxxxxxxxx):

•Delete the unit’s configuration through the Configuration screens.

Note Deleting the unit’s configuration using <Cntl+A> and choosing 4 in the Boot Menu does not set the password to the default value.

Turning IPmux-1/1E Off

To power off the unit:

•Switch PWR to OFF.

Operating Instructions 3-5