Brocade Communications Systems IP250 user manual Editing a one-time discovery schedule

IP discovery profiles 3

7.Rearrange schedules in the Scheduled Discovery Cycles list by selecting an item in the list and clicking the Up or Down buttons to move it.

8.Click Apply to save your changes.

9.Click Close to close the Discover Setup - IP dialog box.

10.Click Yes on the confirmation message.

Editing a one-time discovery schedule

To edit a one-time discovery schedule, complete the following steps.

1.Select the time of day you want discovery to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

2.Click the Date list to select a date from the calendar.

3.Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.

4.To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 76.

Editing an hourly discovery schedule

To edit an hourly discovery schedule, complete the following steps.

1.Select the minute past the hour you want discovery to run from the Minutes past the Hour list. Where the minute value is from 00 through 59.

2.Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.

3.To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 76.

Editing a daily discovery schedule

To edit a daily discovery schedule, complete the following steps.

1.Select the time of day you want discovery to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

2.Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.

3.To finish editing the discovery schedule, return to “Editing a discovery schedule” on page 76.

Editing a weekly discovery schedule

To edit a weekly discovery schedule, complete the following steps.

1.Select the time of day you want discovery to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

2.Select the day you want discovery to run from the Day of the Week list.

3.Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.

Brocade Network Advisor IP User Manual	77
53-1003056-01