Brocade Communications Systems IP250 user manual Adding Cidr subnet addresses

IP discovery profiles 3

•To exclude an address range using the address range format, refer to “Excluding IP addresses” on page 70.

NOTE

To exclude a VCS fabric, you must add all members of the VCS fabric to the exclude list.

8.Click the right arrow button to add the address range to the Excluded IP Addresses list.

9.Click Apply to save your changes.

10.Click Close to close the Discover Setup - IP dialog box.

11.Click Yes on the confirmation message.

Adding CIDR subnet addresses

To add CIDR subnet addresses (IPv4 and IPv6), complete the following steps.

1.Select CIDR Subnet from the Entry Type list.

FIGURE 21 Include CIDR Subnet

2.Enter the IP address in the IP Address field.

3.Enter the number of subnet mask bits in the Subnet Mask Bits field. For IPv4, the number of subnet mask bits is from 0 through 32.

For IPv6, the number of subnet mask bits is from 0 through128.

4.To exclude an address range using the CIDR Subnet format, refer to “Excluding CIDR subnet addresses” on page 69.

5.To finish configuring the address ranges, return to “Configuring address ranges” on page 66.

Brocade Network Advisor IP User Manual	67
53-1003056-01