Brocade Communications Systems IP250 user manual 539

FCoE login groups 16

Without the FCoE license, the virtual FCoE port displays in the device tree, but you cannot enable, disable, or view virtual FCoE port information.

NOTE

FCoE Login Group is not available for Network OS DCB devices.

1.Select Configure > FCoE from the menu bar.

The FCoE Configuration dialog box displays all configured login groups and the following details associated with a selected device, shown in Figure 199.

•FCoE login — Indicates whether the switch is FCoE enabled or disabled.

•Group Status — Indicates whether the group is active or conflicted.

•Member Status — Indicates whether the device associated with the group is active or conflicted.

•Member WWN — Displays the world wide name (WWN) of the device associated with the group.

•Type — Displays the model type.

FIGURE 199 FCoE Configuration dialog box

2.Perform one of the following tasks: Under Login Group:

•Click Add to launch the Add Login Group dialog box, where you can select an existing switch or enter the WWN of a switch on which the FCoE login group will be created. See “Adding an FCoE login group” on page 540.

•Click Edit to launch the Edit Login Group dialog box, where you can edit the login group parameters. See “Editing an FCoE login group” on page 541.

•Click Delete to remove the login group from the list. See “Deleting one or more FCoE login groups” on page 542.

Brocade Network Advisor IP User Manual	539
53-1003056-01