Brocade Communications Systems IP250 user manual Schedule PoE power deployment

Schedule PoE power deployment 35

6.Click Close to close the Deployment Status dialog box.

NOTE

Closing the Deployment Status dialog box does not stop deployment.

The updated PoE operational state of the selected port displays in the Admin State column.

7.Click Close to close the Power Center dialog box.

Schedule PoE power deployment

You can define a deployment schedule on a port, product, port group, or product group. However, when you schedule a deployment on a product, port group, or product group, the schedule is only configured on the ports present when you create the schedule. If you add ports to the productor products to the product group, the deployment schedule is not configured on the new ports. To configure the deployment schedule on the new ports, refer to “Updating a power deployment schedule” on page 1083.

Scheduling an power up deployment

To schedule a power up deployment, complete the following steps.

1.Select Monitor > Power Center.

The Power Center dialog box displays.

2.Select PoE Products from the View list.

3.Select a port, product, port group, or product group in the PoE Product list and click Schedule PoE On/Off.

The Schedule PoE On/Off dialog box displays.

Brocade Network Advisor IP User Manual	1077
53-1003056-01