Brocade Communications Systems IP250 user manual Selecting source address products and ports

37 Event action definitions

4.For each varbind in the Selected Varbinds list, select one of the following operations for the condition you want to filter:

•= – Equal to

•!= – Not equal

•< – Less than

•> – Greater than

•>= – Greater than or equal to

•<= – Less than or equal to

•In – Matches collection

•Not_in – Does not match collection

•~ – Arbitrary Unicode regular expression

5.Enter the value of the varbind. The value you enter must conform to the data type required by the varbind. For example, if the varbind expects an integer and you enter a text string, your entry will be rejected. Alternatively, you can select values from drop-down lists, shown in Figure 484.

6.Click Next.

The Sources pane of the Add Event Action dialog box displays. Proceed to “Selecting source address products and ports”.

Selecting source address products and ports

The Sources pane of the Add Event Action dialog box, shown in Figure 485, allows you to enter the IP address, the world wide name, or the name of the source to use as event senders. Alternatively, you can select source address products to use as event senders from the available list of sources. You can select from the available list of SAN products, IP products, or hosts by selecting the appropriate tab.

FIGURE 485 Sources pane of the Add Event Action dialog box

1170	Brocade Network Advisor IP User Manual
	53-1003056-01