Brocade Communications Systems IP250 Bulk port configuration, Configuring host adapter ports

15 Bulk port configuration

3.From the Boot Image Management dialog box, click the Update button to download a boot image to one or more selected hosts.

One of the following download status messages displays in the Status column of the Selected Hosts list:

•Ready

•Queued

•In progress

•Failed — If the download failed, the failure reason displays in the Message column of the Selected Hosts list; for example, failed to connect to HCM agent, a checksum error occurred, or the file is invalid.

•Finished

4.Alternatively, you can click the Select Latest button to automatically select the latest boot image for the selected hosts.

Deleting a boot image from the repository

1.Select one or more boot images from the Boot Image File Name list on the Boot Image Repository dialog box.

2.Click Delete.

The boot image is removed from the boot image repository.

Backing up boot image files

You can back up the boot image files from the repository using the Options dialog box. Refer to “Backup support” on page 479 for instructions.

Bulk port configuration

Use the Adapter Host Port Configuration dialog box to create and assign port-level configurations to either a single or multiple adapter ports at a time. You can save up to 50 port-level configurations.

The Management application supports the following default port configurations, which you can select and assign to one port or multiple ports. You cannot edit the default configurations, but you can delete them.

•Default Port — The port property. The default value is Enabled.

•Default FDFS — The Frame Data Field Size property. The default value is 2048.

•Default QoS — The Quality of Service property. The default value is Enabled.

•Default TRL — The Target Rate Limiting property. The default value is Enabled.

Configuring host adapter ports

To create, edit, duplicate, or delete port configurations, complete the following steps.

Select Host > Adapter Ports from the Configure menu.

The Configure Host Adapter Ports dialog box, shown in Figure 175, displays.

464	Brocade Network Advisor IP User Manual
	53-1003056-01