Brocade Communications Systems IP250 user manual IP device properties

		IP device properties	E
Field/Component	Description
QoS tab — Non-DCB mode (Ethernet Pause and Ethernet PFC)
Mode	The mode of Quality of Service (QoS) assigned to the port (non-DCB).
Flow Control	The Ethernet priority flow control mode of the port. The default flow
	control mode is Off. Possible modes are as follows:
	•	Off
	•	802.3x pause
	•	Tx On or Off
	•	Rx On or Off
	•	Priority Flow Control. For this mode, the Tx and Rx values for each
		CoS display in the table.
Maps	Displays details about the following DCB maps:
	• CoS to CoS — Displays the details of the CoS to CoS map (the
	•	default) assigned to the port.
		Traffic Class — Displays the details of the Traffic Class map
		assigned to the port.
L2 ACLs tab
Name	The name of the Access Control List (ACL).
Type	The ACL type. Options include Extended and Standard.
L2 ACLs list	The list includes the following details:
	• Sequence — The Layer 2 ACL entry sequence number.
	•	Action — Whether the ACL permits or denies traffic.
	•	Source — The source MAC address on which the ACL filters traffic.
	•	Count — Whether count is enabled or disabled.
Ports tab	Select to display information about ports on the fabric.
Show list	Select what ports you want to display. Options include:
	• Fabric and Edge Ports
	•	Edge Ports
	•	Fabric Ports
	•	FC Ports
Port Count	The number of ports in the group.
Port Actions list	Select one of the following options:
	•	Enable
	•	Disable
	•	Display Attached Port Properties
Performance list	Select to launch the Performance dialog box.

Brocade Network Advisor IP User Manual	1323
53-1003056-01