Brocade Communications Systems IP250 Viewing LLDP-DCBX parameters on the Network OS switch LAG

FCoE Logical Link

FCoE Application

DCBX

Advertise — The profiles that are configured to advertise. The profile options are as follows:

-

-

-

			Network OS switches in VCS mode	16
TABLE 70	FCoE configuration parameters on VCS switch
Field/Component		Description
FCoE Map		Displays the following information about the FCoE map:
Note: The default FCoE map contains		•	Fabric Map — The name of the Fabric map. The default Fabric map
both the default Fabric map and the		•	consists of virtual fabric and FCoE VLAN-related information.
default DCB map.			DCB Map — The name of the DCB map.
Fabric Map		Displays the following information about the Fabric map:
		• VLAN ID — The FCoE VLAN identifier associated with the Fabric
		•	map.
			FCMAP — The unique MAC address prefix an FCoE Forwarder (FCF)
		•	uses to identify FCoE traffic on a particular FCoE VLAN.
			Fabric ID — The Fabric identifier.
		•	Priority — The FCoE priority forwarding class to queue mapping.
		•	FIP Advertisement Interval — Displays the frequency, in seconds, at
		•	which FIP advertisements are set.
			FIP Keep Alive Timeout — Displays whether the Keep Alive Timeout

feature is enabled. The feature represents the amount of time (in seconds) to keep keep-alive connections active.

Viewing LLDP-DCBX parameters on the Network OS switch LAG

Table 71 describe the parameters that displays on the View LAG dialog box - LLDP-DCBXtab. TABLE 71 LLDP-DCBX parameters on the Network OS switch LAG

Field/ComponentDescription

Enable LLDP-DCBX check box	Indicates whether LLDP-DCBX feature is enabled or disabled and
	whether the global configuration or a specified LLDP profile has been
	assigned to the vLAG ports.
LLDP Profile Parameters	Displays the following LLDP profile parameters:
	• Name — The name of the LLDP profile.
	•	Description — A description of the LLDP profile.
	•	Mode — The Transmit and Received mode. Options include Both
	•	Transmit and Received, Transmit Only, or Receive Only.
		Hello — The hello interval time (in seconds) for the bridge. The value
	•	range is from 4 through 180 and the default value is 30.
		Multiplier — The multiplier (in seconds). The value range is from 1
	•	through 10 and the default is 4.

Brocade Network Advisor IP User Manual	535
53-1003056-01