Brocade Communications Systems IP250 user manual Deploying Vpls properties using Vpls Manager

28 VPLS Manager

FIGURE 367 VPLS Configuration wizard Deployment Properties dialog box

Deploying VPLS properties using VPLS Manager

1.From the Deployment Properties pane, choose one of the following persistence properties:

-Do not Save to Flash or Reload - Use this option if you want to update the running configuration. The payload configuration is not saved to the device flash memory, nor is the device rebooted when the payload configuration is deployed.

-Save to Flash - Use this option if you want to make the payload configuration permanent in the device flash memory and saved to the running configuration. This is equivalent to entering a write memory command. The payload configuration is applied to the device when the device reboots.

-Save to Flash and Reload - Use this option if you want to save the payload configuration to the device flash memory and reboot the device. This is equivalent to entering the write memory and reload commands. The availability of this option depends on your user privileges.

2.Determine if you want to save the payload configuration in the Management application. If this is a one-time deployment, select One time deployment, do not save configuration. If you want to save the configuration for future deployment, select Save configuration, and enter a configuration name and description.

3.Click Next.

If you did not select Save configuration on the Deployment Properties dialog box, the Summary dialog box displays (Figure 369), and you may skip to step 1.

If you selected Save configuration on the Deployment Properties dialog box, the Deployment Schedule dialog box displays (Figure 368). Proceed with step 1.

892	Brocade Network Advisor IP User Manual
	53-1003056-01