Brocade Communications Systems IP250 user manual 999

IP historical performance monitoring 33

FIGURE 404 Data Collector wizard Collector Basics dialog box

3.Enter a descriptive name for the data collector in the Name field.

4.Use the Polling Interval list to set the polling interval.

The choices are 1 minute, 5 minutes, 10 minutes, 15 minutes, and 30 minutes.

5.Select the Target Type.

•If you select Product level, SNMP data is collected at the product (device) level.

•If you select Port level, SNMP data is collected at the port level.

6.Select the Status of the collector.

•If you select Enabled, the data collector starts collecting data immediately.

•If you select Disabled, the data collector stops collecting data.

•If you select Schedule, you may set up a time schedule for running the data collector.

The following options become active when you select Schedule:

•Frequency - This list allows you to run the data collector on a Yearly, Monthly, Weekly, Daily, Hourly, or One Time basis. Appropriate options are displayed allowing you to set a start time and duration for data collection.

•If you select Yearly, or One Time, the Time (hh:mm) and Date selectors display.

•If you select Monthly, the Time (hh:mm) and Day of the Month selectors display.

•If you select Weekly, the Time (hh:mm) and Day of the Week selectors display.

•If you select Daily, the Time (hh:mm) selector displays.

Brocade Network Advisor IP User Manual	999
53-1003056-01