Brocade Communications Systems IP250 user manual Top Port Traffic monitor

7 Performance monitors

•Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) — Displays one of the following:

-Connected Port — The ISL or IFL port on the connected device. Click to launch the switch port properties dialog box.

-Initiator — The initiator port on the connected device. Click to launch the device properties dialog box.

-Target — The target port on the connected device. Click to launch the device properties dialog box.

•Too Long Errors— The number (error count) of frames longer than the maximum frame size allowed errors for the duration specified in the monitor.

•Too Long Errors/sec — The number (error rate) of frames longer than the maximum frame size allowed errors per second for the duration specified in the monitor.

•Product — The product affected by this monitor.

•Type — The type of port (for example, U-Port).

•Identifier — The port identifier.

•Port Number — The port number.

•State — The port state (for example, Enabled).

•Status — The port status (for example, Up).

•Refreshed — The time of the last update for the monitor.

To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on page 263.

Top Port Traffic monitor

The Top Port Traffic monitor (Figure 102) displays the top ports with receive and transmit traffic in a table.

FIGURE 102 Top Port Traffic monitor

The Top Port Traffic monitor includes the following data:

252	Brocade Network Advisor IP User Manual
	53-1003056-01