Brocade Communications Systems IP250 user manual Snmp Trap forwarding credential settings

SNMP Trap forwarding credential settings 5

FIGURE 63 Options dialog box (Trap Registration pane)

3.Select the Auto register server as SNMP trap or informs recipient check box, if necessary. This check box is selected by default.

4.Click Apply or OK to save your work.

Configuring the SNMP trap listing port number

1.Select Server > Options.

The Options dialog box displays.

2.Select Trap Registration in the Category pane.

3.Enter the SNMP listening port number of the Server in the SNMP Listening Port (Server) field, if necessary.

The default SNMP listening port number is 162 and is automatically populated.

4.Click Apply or OK to save your work.

SNMP Trap forwarding credential settings

You can configure SNMP credentials for the traps forwarded by the server.

Configuring SNMP v1 and v2c credentials

To configure a SNMP v1 or v2c credentials, complete the following steps.

1.Select Server > Options.

The Options dialog box displays.

2.Select Trap Forwarding Credentials in the Category pane. The Trap Forwarding Credentials pane displays (Figure 64).

Brocade Network Advisor IP User Manual	153
53-1003056-01