LSP 28

In addition to the topology information in the TED, the product considers attributes and requirements specified in configuration statements for the LSP. The LSP allows you to specify and adjust many of the parameters used when the product calculates a traffic-engineered path for a signalled LSP, including the following:

An RSVP signalled LSP address for the egress LER.

Explicit path to be used by the LSP.

Bandwidth required by the LSP.

Setup priority for the LSP.

Metric for the LSP.

Whether the LSP includes or excludes links belonging to specified administrative groups.

Viewing LSP Admin Group information

MPLS interfaces on an LSP can be organized into administrative groups (admin groups). LSP admin groups are typically used to manage CSPF path selection by including or excluding network segments identified as admin groups. Take the following steps to view LSP admin groups.

1.Select Configure > MPLS > LSP.

2.Select the Admin Groups tab (Figure 329).

FIGURE 329 LSP dialog box, Admin Groups tab

Brocade Network Advisor IP User Manual

847

53-1003056-01

 

Page 899
Image 899
Brocade Communications Systems IP250 user manual Viewing LSP Admin Group information, Select Configure Mpls LSP