Editing a port configuration | Brocade Communications Systems IP250

15 Adapter port WWN virtualization

Editing a port configuration

The Edit Port Configuration dialog box allows you to modify port configuration parameters that were configured using the Add Port Configuration dialog box.

1.Click Edit on the Configure Host Adapter Ports dialog box. The Edit Port Configuration dialog box displays.

2.Modify the parameters that are described in “Adding a port configuration” on page 465.

3.Click OK to save the changes.

Duplicating a port configuration

1.Click Duplicate on the Configure Host Adapter Ports dialog box.

The Duplicate Port Configuration dialog box displays. The default name of the configuration file is source_name copy1.

2.Change the name of the configuration and click OK to save the changes.

Deleting a port configuration

1.Select a configuration from the Port Configuration list in the Configure Host Adapter Ports dialog box.

2.Click the Delete button.

The port configuration is removed from the list.

Adapter port WWN virtualization

Adapter port world wide name (WWN) virtualization enables the adapter port to use a switch-assigned WWN rather than the physical port WWN for communication, allowing you to preprovision the server with the following configuration tasks:

•Create the zones with the Fabric Assigned WWN (FAWWN) before the servers and devices are connected to the switches, before they are exposed to the SAN network.

•Create LUN mapping and LUN masking without the devices present in the network.

•Preconfigure boot LUN zoning. You can configure Solaris ports or Linux ports on the switch, enabling the server to boot automatically with the predefined boot LUNs.

NOTE

Fabric Assigned WWN (FAWWN) is not supported for base switches or FICON-enabled switches.

Configuring FAWWNs on switch ports

The Configure Fabric Assigned WWNs dialog box, shown in Figure 177, enables you to perform the following tasks:

•Enable and disable the Fabric Assigned WWN feature status on a switch or Access Gateway port.

468	Brocade Network Advisor IP User Manual
	53-1003056-01

Image 520

Brocade Communications Systems IP250 user manual Adapter port WWN virtualization, Configuring FAWWNs on switch ports

Contents

Brocade Network Advisor Brocade Communications Systems, Incorporated Title Publication number Summary of changes Date Title Publication number Summary of changes Date 53-1003056-01 Contents Installing a patch Uninstalling a patch Chapter Discovery Vii Configurable preferences Management groups overviewDisplaying Network Object view 111 Viewing configured users Users overview181 182 Accessing a dashboard Setting the dashboard displayDashboard overview Dashboard toolbar 53-1003056-01 IP tab overview IP main toolbarProduct List toolbar Host Product List toolbar Viewing Call Home configurations Call Home overviewSystem requirements 344 About third-party tools Starting third-party tools from the applicationLaunching a Telnet session Launching an Telnet session from the IP tab Wireless management overview Wireless devicesServer Management Console overview Launching the SMC on Windows VCS mode types Logical chassis cluster mode discoveryVCS Ethernet Fabrics view management Host management Brocade adaptersHost Bus Adapters Converged Network Adapters This chapter 481 Adding policies from saved configurations Telemetry overviewPolicy-based routing Viewing existing PBR policies Layer 2 access control list management IronWare Layer 2 ACL configurationFabric OS Layer 2 ACL configuration Creating a Layer 2 ACL from a saved configuration Scheduling a security configuration deployment Zoning overviewOnline zoning Offline zoning Chapter Port Fencing 671 Chapter IP Element Manager 723 743 765 CLI configuration overview 777778 807 Default Vlan Remote Switched Port AnalyzerConfiguration requirements for Vlan Manager Adding or modifying dual mode ports Mpls pre-configuration 843 VIP Server functions VIP Servers overview917 Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management This chapter 1213 Configuring packet captures Chapter Technical Support Reports Dashboard main menus 1261 IP main menus IP shortcut menus Link incident eventsProduct status events 1277 Database tables and fields This appendix1371 Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo This chapter About This DocumentHow this document is organized Xliv 53-1003056-01 Supported hardware and software Fabric OS hardware and software support IronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Document conventions Text formattingKey terms Bold text Additional information Brocade resourcesOther industry resources These references are made for informational purposes only Getting technical help Document feedback Getting Started User interface components Management server and client Logging into a server Management server and client Launching a remote client Clearing previous versions of the remote client Launching the Configuration Wizard 53-1003056-01 53-1003056-01 Select Server Active Sessions Viewing active sessionsActive Sessions dialog box displays Figure Disconnecting users Viewing server propertiesTo disconnect a user, complete the following steps Select Server Server Properties Viewing port status Management server and client Server PropertiesClick Close to close the Server Properties dialog box Field/Component Description Server and client ports TCP Tftp UDP 4431,2 Https server Json Accessibility features for the Management application Accessibility features for the Management applicationKeyboard shortcuts Menu Item or Function Keyboard Shortcut Setting the look and feel Look and feel customizationSelect Server Options Options dialog box displays PostgreSQL database Connecting to the database using pgAdminChanging the font size PostgreSQL database Selecting File Add Server Odbc Data Source Administrator dialog box displays Click the System DSN tab Click AddLinux version RedHat Package Manager file Suse Installing the Odbc driver on Linux systems On the Setup psqlODBC screen click NextAdding the Datasourse on Linux systems Save and close the odbcinst.ini file Testing the connection on Linux systems Executing SQL queries from the CLIOn the Select database screen, complete the following steps Select the Connect to an existing database option Supported open source software products Changing the database user passwordOpen Source Software License Type Lgpl HP Software Development KIT License Agreement Ireasoning BSD Open Source Software License Type Supported open source software products Patches Installing a patchExecute the patch file for your operating system Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview 53-1003056-01 Configuration requirements Discovery of IPv6 addressesMIB support Ietf standard MIB name Required MIB object Data collected IF-MIB MIB-IIBRIDGE-MIB Ietf standard MIB name Required MIB object Data collected ENTITY-MIB VDX/VCS discoveryIP-MIB Network OS discovery IP address format VCS in-band management interface discoveryMapping VCS in-band management 1000000533516242 Standalone discovery VCS fabric discoveryVCS fabric rediscovery Select File Save VCS fabric split and merge Seed switch failoverNetwork OS 2.0 device limitations Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change Configuring IP profile discovery Discover Setup IP dialog box displaysHyperEdge stack discovery HyperEdge stack discovery Configuring IP profile discovery Click the Global Settings tab Configuring IP simple discovery Configuring IP simple discoveryIP Snmp credentials Adding SNMPv1 and SNMPv2c credentials IP Snmp credentials Click the Snmp tab HMACMD5 Hmacsha Adding SNMPv3 credentialsCBC-DES Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Reordering Snmp credentials in the list Deleting Snmp credentials from the list Default IP user credentials Adding user credentials Default IP user credentials 53-1003056-01 Editing login prompt user credentials Editing enable prompt user credentials Editing enable super user credentials To edit an enable super user, complete the following steps Reordering user credentials in the list Deleting user credentials from the list IP Object identifier filters Including product typesIP Object identifier filters Click the OID Filter tab Excluding product types Product sysObjectID Vendor Defining global setting preferences Defining global setting preferencesDeleting product types from the list Click the Preferences tab 53-1003056-01 Configuring event-based collection Reduce the managed count by completing the following steps 53-1003056-01 IP discovery profiles Configuring a discovery profileIP discovery profiles Duplicating a discovery profile Configuring address ranges Adding Cidr subnet addresses Select Cidr Subnet from the Entry Type list Adding subnet addresses Adding IP addresses Excluding Cidr subnet addresses Excluding subnet addresses Editing address ranges Excluding IP addresses Editing subnet addresses Editing Cidr subnet addressesEditing IP addresses Scheduling discovery Configuring a one-time discovery schedule Configuring an hourly discovery schedule Configuring a daily discovery schedule Configuring a weekly discovery schedule Configuring a monthly discovery schedule Configuring a yearly discovery schedule Editing a discovery schedule Suspending a discovery scheduleTo edit a discovery schedule, complete the following steps Editing a one-time discovery schedule Editing an hourly discovery scheduleEditing a daily discovery schedule Editing a weekly discovery schedule Editing a monthly discovery schedule Configuring advanced discovery profile preferencesEditing a yearly discovery schedule IP discovery profiles Creating a discovery address file Deleting a discovery profileStarting discovery manually Starting discovery automatically Stopping discoveryViewing discovery status To view discovery status, complete the following steps Viewing discovery reports Mailing discovery reports Viewing the discovery log Exporting discovery reportsClick Discovery Log Adding an IP device to discovery Individual IP device discoveryIndividual IP device discovery HMACMD5 Click the SNMPv3 Read Only tab Click the SNMPv1/v2c Read/Write tab Click the SNMPv1/v2c Read Only tab Editing IP device discoveryClick the Read/Write Credentials tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Host discovery Deleting IP devices from discoveryDiscovering Hosts by Network address or host name Select Discover Host Adapters Host discovery Importing Hosts from a CSV file Click Close on the Discover Host Adapters dialog box Host discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery Editing Host adapter credentials To edit Host credentials, complete the following steps Removing a host from active discovery Rediscovering a previously discovered fabricDeleting a host adapter from discovery Click Discover Viewing the host discovery state Troubleshooting host discoveryIconDescription VM Manager discovery VM Manager discovery requirementsDiscovering a VM manager Select Discover VM Managers Clear to disable vSphere client plug-in registration VM Manager discovery Click Close on the Discover VM Managers dialog box Editing a VM managerTo edit VM manager discovery, complete the following steps Excluding a host from VM manager discovery Including a host in VM manager discoveryRemoving a VM manager from active discovery Rediscovering a previously discovered VM manager Deleting a VM manager from discovery Viewing the VM manager discovery state IP Rediscovery Troubleshooting VM manager discoveryRediscovering IP devices Rediscovering IP devices from the Product List Click Rediscover Enabling password validation on rediscovery Rediscovering a group Management groups overview Management GroupsDisplaying Network Object view Product group overview Static product groups Creating a static product group Editing a static product group Product group overview Duplicating a static product group Dynamic product groups Creating a dynamic product group Userdefinedproperty1 up to Select Value or Regular Expression from the Type list Editing a dynamic product group Duplicating a dynamic product group Viewing test results Viewing product group propertiesProduct Group Properties dialog box displays Click OK to close the dialog box Properties tabProducts tab Performance list Port Groups Deleting a product groupCreating a port group Port Groups Editing a port group Duplicating a port group Viewing port group properties Ports tab Deleting a port group Application Configuration Configurable preferences Server Data backup What is backed up? Management server backupConfiguring backup Select Server Backup in the Category list 130 53-1003056-01 Enabling backup Disabling backup Viewing the backup statusChanging the backup interval Clear the Enable Backup check box Click Apply or OK Reviewing backup events Starting immediate backupSelect Server Backup in the Category list Click Backup Now Server Data restore Restoring data SAN data collection Restoring data to a new server 136 53-1003056-01 Icmp Product communication protocolsSnmp Netconf FTP Event storage settings Configuring event storageEvent storage settings Product communication protocols To configure event storage, complete the following steps Flyover settings Configuring flyoversStoring historical events purged from repository Select Event Storage in the Category list Properties table Options dialog box Flyovers pane, Connection tab Turning flyovers on or off Name settingsViewing flyovers Fixing duplicate names Select Configure NamesClick Fix Duplicates Configure Names dialog box displays Figure Name settings Select one of the following optionsViewing names Adding a name to an existing device Applying a name to a detached WWN Adding a name to a new deviceClick Apply Names Removing a name from a device Editing namesExporting names Click Export Importing Names Searching for a device by nameTo import names, complete the following steps Click Import Miscellaneous security settings Searching for a device by WWN Configuring login security Configuring the server nameSelect Security Misc in the Category list Syslog Registration settings Configuring the login banner displayDisabling the login banner Registering a server as a Syslog recipient automatically Configuring the Syslog listing port number Snmp Trap Registration settingsRegistering a server as a Snmp trap recipient automatically Snmp Trap forwarding credential settings Configuring the Snmp trap listing port numberConfiguring Snmp v1 and v2c credentials Snmp Trap forwarding credential settings Configuring Snmp v3 credentials Configuring the server IP address Software ConfigurationClient/Server IP 156 53-1003056-01 Configuring an explicit server IP address Configuring the application to use dual network cards Click OK on the Login Banner You can configure the following preferences for IP products Software ConfigurationIP preferences Configuring change manager preferences Configuring deployment preferences Configuring custom report preferencesConfiguring deployment report preferences Configuring IP device manager preferences Configuring image repository preferencesConfiguring Mpls management preferences Configuring Mpls polling service preferences Configuring name service preferences Configuring polling service preferencesConfiguring sFlow accounting preferences Configuring sFlow data collector preferences Configuring sFlow monitoring preferences Configuring SSL certificates preferences Configuring syslog file reader preferences Configuring Snmp preferencesConfiguring Tftp preferences Memory allocation settings Configuring memory allocation settings Server Heap Size Configuring asset polling Configuring SAN communication Product communication settingsViewing the network size status Select the Connect using Http option Configuring the preferred IP formatSelect the Connect using Https Http over SSL only option Configuring IP communication FTP/SCP/SFTP server settings Http Accessing the FTP server folder Configuring an internal FTP server Configuring an internal SCP or Sftp server Configuring an external FTP, SCP, or Sftp server Select the Use External FTP Server and/or SCP Server option Testing the FTP, SCP, and Sftp server Select SCP from the Preferred Protocol Secured listSelect Sftp from the Preferred Protocol Secured list Select FTP/SCP/SFTP in the Category list Configuring the server port Server port settingsTo configure server settings, complete the following steps Support mode settings Configuring support mode settingsSelect Support Mode in the Category list Options dialog box displays Figure Configuring the server log file purge limit Fips Support User Account Management Users overview Viewing configured users To view configured users, complete the following stepsSelect Server Users Users dialog box displays Click the Users tab, if necessary 183 184 53-1003056-01 User accounts Creating a new user accountUser accounts To create a new user account, complete the following steps 186 53-1003056-01 Editing a user account Copying a user account Copying and pasting user preferences Disabling a user account Enabling a user account Deleting a user accountUnlocking a user account To re-activate a user account, complete the following steps Roles Creating a new roleRoles To create a new role, complete the following steps Editing a role Copying a role Adding privileges to a role Deleting a roleTo delete a role, complete the following steps Removing privileges from a role Areas of responsibilityAreas of responsibility Creating an AOR Editing an AOR Copying an AOR Deleting an AOR Assigning products to an AOR Password policies Configuring a password policyRemoving products from an AOR Users dialog box displays Click the Policy tab 199 Viewing password policy violators Authentication Server Groups on the Management server Click the Authentication Server Groups tabAssigning roles and AORs to an AD group Click View Policy Violators Loading an AD group Removing roles and AORs from an AD groupTo load an AD group, complete the following steps Deleting an AD group Creating an AD user accountOpen the Active Directory Users and Computers console Close the Active Directory Users and Computers dialog box Assigning an AD user to an AD group Configuring roles and AORs on the external Ldap serverDefining user accounts on the external Ldap server Click OK Close the Management console User profilesSelect Start Run Type adsiedit.msc and press Enter User profiles Configure CLI credentials Viewing your user profileSelect Server User Profile Click OK on the User Profile dialog box Changing your password Editing your user profileUser profiles To edit your user profile, complete the following steps Viewing your password policy To view your password policy, complete the following steps Resetting optional messages Configuring e-mail notificationConfiguring CLI credentials Click Optional Messages Reset Configuring the CLI credential policy Dashboard Management Dashboard overview 212 53-1003056-01 Dashboard toolbar Toolbar Dashboard messages Dashboards expand navigation bar Accessing a dashboard General dashboard functions Filtering the dashboards list Creating a user-defined dashboard Deleting a user-defined dashboard Setting the dashboard displayCustomizing the dashboard widgets and monitors 218 53-1003056-01 Printing the dashboard display Exporting the dashboard displayAttaching and detaching the Dashboard tab Setting the network scope Creating a customized network scope Editing a user-defined network scope Setting the data display time frameDeleting a user-defined network scope Product Status and Traffic dashboard Default dashboardsIP Port Health Status widgets Access Point Status widgetStatus widgets Customizing the Access Point Status widget Color Type Events widget ColorSeverity Accessing additional data from the Events widget Customizing the Events widget Host Adapter Inventory widget Customizing the Host Adapter Inventory widget IP Inventory widget Accessing additional data from the IP Inventory widget Customizing the IP Inventory widget IP Status widget displays the device status as a pie chart IP Status widget Accessing additional data from the IP Status widget Viewing additional IP product data Status widget Fabric Watch widgetsFabric Watch widgets Out of Range Violations widget Port Health Violations widget Customizing the Out of Range Violations widget Customizing the Port Health Violations widget Performance monitors Accessing additional data from the widgetMonitor title Description Data collectors Displaying monitors on the Performance Dashboard Performance monitors Preconfigure performance monitorsClick the Customize Dashboard icon Accessing additional data from top or bottom port monitors Top Port Alignment Errors monitorPerformance monitors Click OK Top Port C3 Discards monitor Performance monitors Top Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Top Port Encode Error Out monitor Accessing additional data from the Top Port Discards monitor Top Port Errors monitor Top Port Errors monitor Accessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Runtime Errors monitor Top Port Receive EOF monitor Top Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Top Port Underflow Errors monitor Accessing additional data from the Top Port Traffic monitor Top Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor Monitor types User-defined performance monitorsMeasures Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors User-defined performance monitors Port measures types Accessing additional data from the Distribution monitors Time series performance monitors Configuring a user-defined product performance monitor Accessing additional data from the sFlow monitorsTop sFlows performance monitors Add Performance Dashboard Monitor dialog box displays 271 Adding targets to a user-defined performance monitor Click OK on the Add Performance Dashboard Monitor dialog box Configuring a user-defined port performance monitor Performance Dashboard Monitor Targets dialog box displays 274 53-1003056-01 Configuring a user-defined sFlow performance monitor MAC Vlan Viewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph View Management Utilization Legend IP tab overview IP main toolbar Main toolbar Product List toolbar Host Product List toolbar Topology Map toolbar Host topology map toolbar IP Product List Topology Map Product List functions 286 53-1003056-01 IP tab overview Topology keyboard shortcuts Master LogKeyboard Shortcut Description Minimap Anchoring or floating the Minimap Status bar Resizing the Minimap Icon legend IP product icons Host product icons Icon legendVlan CNA IP group icons IP port iconsIP product status icons Event icons Customizing the main window Zooming in and out of the Connectivity MapZooming Customizing the main window Exporting the topology Customizing application tablesZooming out Displaying columns Changing the order of columns Resizing the columns Sorting table informationCopying table information Exporting table information Product List customization Adding a property labelSearching for information in a table Expanding and collapsing tables Editing a property label Deleting a property label Search Searching for a device Restricting a search by node Address Finder Searching for an exact matchClearing search results Address Finder Select Tools Address Finder Finding IP addressesAddress Finder dialog box displays 303 Finding MAC addresses 305 IP topology view manager Network Objects view Network Object view functions Clearing the Network Objects Product List filter Filtering devices in the Network Objects Product ListNetwork Objects view L2 Topology view IP Topology viewIP Topology view Ethernet Fabrics view Vlan Topology viewSTP/RSTP topology Ethernet Fabrics view Viewing STP/RSTP topology ElementDescription Generating an STP/RSTP Report Exporting an STP/RSTP ReportVlan Topology view STP/RSTP Topology map elements Element Description Mailing an STP/RSTP Report Host Topology viewHost Topology view Click Save 314 53-1003056-01 Topology map elements IP topology map componentsIP topology map components Logical Icon Description ProductsConnections Viewing flyovers on the topology map Topology map layout Organic Orthogonal Orthogonal Merge Lines Hierarchical Circular Selecting a topology map layoutFree Form Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Deleting a background image from the library Click OK on the Topology Background Map dialog box Printing a map Select Portrait or Landscape from the Orientation area Port actions Enabling port actions Displaying port properties for an attached device Disabling port actionsPort actions Accessing performance monitoring 330 53-1003056-01 MRP Topology MRP Topology overview Viewing a MRP Topology map Viewing a MRP ring Master Error Viewing a MRP ring MRP Topology map elements Configuring the application to show a dashed line Selecting a topology map layout 336 53-1003056-01 337 Creating a customized layout Click the Starting Point row Customizing the MRP Topology mapEnter the ring ID, for example, Ring Viewing MRP properties Refreshing MRP Topology dataClick Close on the MRP Topology Options dialog box 341 Viewing MRP properties Call Home Call Home Viewing Call Home configurations System requirements 346 347 Showing a Call Home center Hiding a Call Home centerShowing a Call Home center To show a Call Home center, complete the following steps Editing the IBM Call Home center Editing a Call Home centerClick Edit Centers beneath the Call Home Centers list Backup Connection field Editing an e-mail Call Home centerPrimary Connection field Click Edit Centers beneath the Call Home Centers table Enter a user name in the Smtp Server Settings Username field Enter a password in the Smtp Server Settings Password field Call Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center Enabling a Call Home center To enable a Call Home center, complete the following stepsEnabling supportSave Testing the Call Home center connection Testing the Call Home center connectionDisabling a Call Home center Select Monitor Event Notification Call Home Viewing Call Home status Viewing Call Home status Assigning a device to the Call Home center Removing a device from a Call Home centerRemoving all devices and filters from a Call Home center Assigning a device to the Call Home center To define an event filter, complete the following steps Defining an event filterClick OK on the Call Home Event Filter dialog box Assigning an event filter to a device Assigning an event filter to a Call Home centerAssigning an event filter to a Call Home center Removing all event filter from a Call Home center Overwriting an assigned event filterOverwriting an assigned event filter Searching for an assigned event filter Removing an event filter from a deviceRemoving an event filter from a device Searching for an assigned event filter About third-party tools Third-party toolsStarting third-party tools from the application Launching a Telnet session Launching an Element ManagerLaunching an Telnet session from the IP tab Select Tools Product Menu ToolName Select Configure Element Manager HCM. HCM Agent displays Select Tools SetupLaunching HCM Agent Adding a tool Entering the server IP address of a tool Adding an option to the Tools menu Changing an option on the Tools menu Removing an option from the Tools menu Adding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Server Management Console overview Server Management ConsoleLaunching the SMC on Windows Services tab Monitoring and managing Management application servicesServices tab Launching the SMC on Linux Stopping all services Stopping the Cimom servicesRefreshing the server status Click Stop Cimom Starting all services Restarting all servicesChanging the database password Click Change Database Password Ports tab Viewing server port numbers AAA Settings tab Configuring Radius server authenticationAAA Settings tab Select Radius Server from the Primary Authentication list Configuring a Radius server Local Database Configuring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server Configuring TACACS+ server authentication For Primary Authentication, select TACACS+ Server Configuring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list Configuring switch authentication For Primary Authentication, select Switch Configuring Windows authentication For Primary Authentication, select Windows Domain Configuring local database authentication Displaying the client authentication audit trailFor Primary Authentication, select Local Database Authentication Audit Trail log displays Restore tab Technical Support Information tabRestoring the database Capturing technical support information To upgrade HCM, complete the following steps HCM Upgrade tabUpgrading HCM on the Management server SMI Agent Configuration Tool SMI Agent Configuration Tool Select the HCM Upgrade tab SMI Agent Configuration Tool Launching the Smia configuration tool on WindowsManagement Console dialog box Launching the Smia configuration tool on Unix Smia Configuration Tool dialog box Service Location Protocol SLP support Launching a remote Smia configuration toolSmia Configuration Tool dialog box displays Slptool commands SLP on Unix systems SLP file locations on Unix systems SLP on Windows systems SLP file locations on Windows systems Authentication tab Home tab Click the Authentication tab Authentication tab Configuring Cimom server authentication Configuring the SMI Agent port number Cimom tab Configuring the Cimom Bind Network Address Configuring the Cimom log To import a certificate, complete the following steps Certificate Management tabClick the Certificate Management tab Viewing a certificate Exporting a certificate Summary tab Deleting a certificate SMI Agent Configuration Tool Click the Summary tab Managed Ports Log LevelLicensed Ports 412 53-1003056-01 Wireless Management Wireless management overview Wireless device discovery Wireless devicesDevice Name Firmware required Wireless devices on the dashboard Wireless devices on the dashboard Wireless device properties View managementElement Manager View management Browser and system requirements Launching the Element Manager Configuration repository and backup management Launching a Telnet session CLI configuration management Save and close the file Cluster mode Vlan management Performance management Fault managementPolicy Monitors AP Products report Status Firmware versionLocation Contact 424 53-1003056-01 VCS Management VCS VCS mode types Fabric cluster mode Logical chassis cluster mode discovery Logical chassis cluster operationsEthernet Fabrics view management This section contains these topics 428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Support for Network OS VDX 2740 embedded switch Network OS VCS product groups Port profilesStatic product group Dynamic product group Life of a port profile Ampp characteristicsPort profile Vlan profile QoS profile Ampp events and behavior Ampp event Applicable behavior and failures Port profile configuration using the management application Assigning MAC addresses to a port profile Managing offline MAC addresses Related topicsClick Add Assign MACs dialog box displays Click Add Offline MACs Comparing port profiles Profile Comparison Summary dialog box Profile Comparison Summary list Vlan SettingsProfile Properties QoS Settings ACL SettingsFCoE Settings Deploying port profiles System Monitor support on Network OS VDX platforms FRU monitoring Alert notifications System thresholdsResource monitoring SFP parameter monitoring Security monitoringPort statistics monitoring SFP parameter Description Suggested SFP impact Interface error types Select Monitor Diagnostics Traceroute Ethernet fabric tracerouteTracing Ethernet fabric routes To diagnose traceroute, you can do either of the following Source address format Condition TCP UDP Ethernet fabric traceroute Trace Route example Request Source port number Destination port number Exporting diagnostic data Browse to the directory where you want to save the data 450 53-1003056-01 Host Management Host management Brocade adapters Host Bus AdaptersFollowing sections describe the three Brocade adapter types Model number Description Converged Network Adapters Fabric Adapters AnyIOTM technology HCM softwareHCM software HCM features Host adapter discovery VM ManagerAdding a VM Manager Click Add on the Discover VM Managers dialog box Deleting a VM Manager HCM and Management application support on ESXi systemsESXi CIM listener ports Adding host adapter credentials for ESXi Add Host Adapters dialog box Select Host Adapter Software from the Configure menu Adapter softwareAdapter software Select CIM server ESXi only as the Contact option Driver repository Importing a driver into the repository Boot image repository Deleting a driver file from the repository Importing a boot image into the repository Boot Image Management dialog box Downloading a boot image to a selected host Click Import on the Boot Image Repository dialog box Bulk port configuration Configuring host adapter portsDeleting a boot image from the repository Backing up boot image files Adding a port configuration Bulk port configurationClick Add on the Configure Host Adapter Ports dialog box Add Port Configuration dialog box, shown in , displays 466 53-1003056-01 Adapter Port Configuration Status dialog box displays Configuring FAWWNs on switch ports Editing a port configurationDuplicating a port configuration Deleting a port configuration Enabling the Fawwn feature on a switch or AG ports Disabling the Fawwn feature on a switch or AG portsSelect Configure Fabric Assigned WWN. or Click Start to save the changes to the switch Manually assigning a Fawwn to a switch or AG port Auto-assigning a Fawwn to a switch or AG portModifying a Fawwn on a switch or AG port Deleting a Fawwn from a switch or AG port FAWWNs on attached AG ports Moving an AG port Fawwn across switches Adding AG port FAWWNsDeleting AG port FAWWNs Click the Attached AG Ports tab Role-based access control Host adapter administrator privilegesRole-based access control Host adapter management privileges Host performance management FC port measures HBA port measures CNA port measures Host security authentication Host security authentication Counters Host security authentication SupportSave on adapters Host fault managementAdapter events Filtering event notifications Host fault managementSyslog forwarding Configuring backup to a hard drive Backup supportSelect the Include FTP Root directory check box Select the Enable Backup check box Click Apply or OK Fibre Channel over Ethernet FCoE overview Enhanced Ethernet features Enhanced Ethernet featuresDcbx protocol Enhanced Transmission Selection FCoE protocols supported Ethernet jumbo framesEthernet link layer protocols supported FCoE protocols Copying switch configurations to selected switches Saving running configurationsFCoE licensing Saving running configurations DCB configuration management Device type Configuration possibilities Switch policies Switch policiesDCB map and Traffic Class map Lldp profiles Minimum DCB configuration for FCoE traffic DCB configurationDCB configuration Select Configure DCB Creating a DCB map to carry the LAN and SAN traffic Configuring Lldp To configure LLDP, complete the following steps To configure the DCB interface, complete the following steps Select Configure Element Manager Admin Select Assign the Global ConfigurationCreating the FCoE Vlan to carry FCoE traffic Adding a LAG Save the running-config file to the startup-config fileApply the Vlan classifier group to the DCB interface Click Add LAG or Edit LAG L2 Mode Select Access or TrunkAdd LAG or Edit LAG dialog box displays, as shown in Figure Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG QoS configuration Deleting a LAG Strict priority No bandwidth % configuration Allowed Creating a DCB mapOff Priority group ID 503 Editing a DCB map Deleting a DCB map QoS configuration Assigning a DCB map to a port or link aggregation group Editing a Traffic Class map Creating a Traffic Class mapSelect Traffic Class from the Map Type list Deleting a Traffic Class map Changing the Vlan ID on the default FCoE map FCoE provisioningFCoE provisioning Select Traffic Class in the Map Type list Enabling or disabling the FCoE map on the port Vlan classifier configuration Adding a Vlan classifier rule Vlan classifier configuration Editing a Vlan classifier rule Deleting a Vlan classifier rule Creating a Vlan classifier group Deleting a Vlan classifier group Configuring Lldp for FCoE LLDP-DCBX configurationLLDP-DCBX configuration 515 Editing an Lldp profile Deleting an Lldp profile 802.1x authentication 802.1x authenticationAssigning an Lldp profile to a port or ports in a LAG Enabling 802.1x authentication Disabling 802.1x authenticationSetting 802.1x parameters for a port 16 802.1x authentication 519 Deploying DCB product, port, and LAG configurations Switch, port, and LAG deploymentSwitch, port, and LAG deployment Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Network OS switches in VCS mode Viewing switches in VCS modeSupported VCS platforms Viewing QoS parameters on the Network OS switch Viewing FCoE parameters on the Network OS switch Viewing LLDP-DCBX parameters on the Network OS switch Available RulesVlan Classifiers Lldp Profiles list Viewing the 802.1x parameter on the Network OS switch Viewing ports in VCS modeViewing port parameters on the Network OS switch port QoS DCB parameters on the Network OS switch port Viewing QoS parameters on the Network OS switch portQoS-DCB QoS non-DCB parameters on the Network OS switch port Viewing FCoE parameters on the Network OS switch portQoS Non-DCB Viewing LLDP-DCBX parameters on the Network OS switch port Viewing the 802.1x parameter on the Network OS switch port Viewing LAGs in VCS mode Viewing LAG parameters on the Network OS switch LAGRe-authentication Interval sec Port Control Viewing QoS parameters on the Network OS switch LAG QoS DCB parameters on the Network OS switch LAGType Minimum Links Viewing FCoE parameters on the Network OS switch LAG QoS non-DCB parameters on the Network OS switch LAG Viewing LLDP-DCBX parameters on the Network OS switch LAG Enable LLDP-DCBX check box DCB performance Real-time performance graphGenerating a real-time performance graph from the SAN tab DCB performance Generating a real-time performance graph from the IP tab Historical performance graphGenerating a historical performance graph FCoE login groups Historical performance reportGenerating a historical performance report Historical Performance Graph dialog box displays 539 Adding an FCoE login group FCoE login groups FCoE login groups Click OK Editing an FCoE login groupFCoE Login Group Confirmation and Status dialog displays Disabling the FCoE login management feature on a switch Deleting one or more FCoE login groupsSelect a group from the Login Groups list and click Delete Virtual FCoE port configuration Enabling the FCoE login management feature on a switchVirtual FCoE port configuration Viewing virtual FCoE ports Select the Virtual FCoE Ports tab Clearing a stale entryVirtual FCoE Ports tab displays, as shown in Figure 545 546 53-1003056-01 Telemetry overview TelemetryPolicy-based routing Viewing existing PBR policies 549 Adding a new policy Adding rules to a policy 551 Editing a policy Adding policies from saved configurationsEditing a rule Deleting a policy or rule Deploying a PBR policy on demand Click OK on the Deploy to Products PBR dialog box Saving a PBR policy deploymentSelect Save deployment only Scheduling a PBR policy deployment Configuring a one-time deployment schedule Configuring an hourly deployment schedule Configuring a weekly deployment schedule Configuring a daily deployment scheduleConfiguring a monthly deployment schedule Resetting ACL counters Configure Security ACL AccountingACL Accounting Enabling or disabling ACL accounting Viewing ACL counters Select the Clear all counters on device check boxPort Selection Layer 2/3 ACL dialog box displays Click OK on the Port Selection Layer 2/3 ACL dialog box 560 53-1003056-01 Security Management Layer 2 access control list managementSecurity overview Creating a Layer 2 ACL configuration IronWare IronWare Layer 2 ACL configurationAdd Layer 2 ACL Configuration dialog box displays MAC Editing a Layer 2 ACL configuration IronWare Click OK on the Add Layer 2 ACL Configuration dialog box Copying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Clearing Layer 2 ACL assignments IronWare Select the Clear ACL Assignment option Creating a standard Layer 2 ACL configuration Fabric OS Fabric OS Layer 2 ACL configurationDeviceName Layer 2 ACL Configuration dialog box displays Copying a standard Layer 2 ACL configuration Fabric OS Editing a standard Layer 2 ACL configuration Fabric OSClick OK on the Edit Layer 2 ACL Configuration dialog box Creating an extended Layer 2 ACL configuration Fabric OS Select Extended from the Type list 572 53-1003056-01 Editing an extended Layer 2 ACL configuration Fabric OS Copying an extended Layer 2 ACL configuration Fabric OS 574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Deleting a Layer 2 ACL configuration from the application Creating a Layer 2 ACL from a saved configurationDeleting a Layer 2 ACL configuration from the switch Network OS Layer 2 ACL configuration Viewing Layer 2 ACL configuration on a fabric Network OS Viewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Layer 3 access control list policy Click OK on the Port Selection Layer 2 ACL dialog box Creating a standard L3 ACL configuration Layer 3 access control list policy Add L3 ACL Configuration dialog box displays Creating a L3 ACL from a saved configuration Click OK on the Add L3 ACL Configuration dialog box Edit L3 ACL Configuration dialog box displays Editing a standard L3 ACL configurationClick OK on the Edit L3 ACL Configuration dialog box Copying a standard L3 ACL configuration Creating an extended L3 ACL configurationClick OK on the Duplicate L3 ACL Configuration dialog box Click Duplicate 586 53-1003056-01 Editing an extended L3 ACL configuration L3 ACL Advanced Settings dialog box displays Copying an extended L3 ACL configuration 589 Creating an IPv6 L3 ACL configuration Add L3 ACL IPv6 Configuration dialog box displays Click OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Assigning a L3 ACL configuration to an interface Deleting a L3 ACL configurationClick OK on the DeviceName L3 ACL Configuration dialog box 595 Clearing L3 ACL assignments Configuring the ACL configuration type and operations Configuring hit statistics Configuring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded Viewing existing networks Network configurationTo view all existing networks, complete the following steps Layer 3 access control list policy Click the Networks tab Creating a network Editing a network Copying a network Deleting a network Network group configuration Viewing existing network groups Creating a network group Review the List of Network Groups tableTo create a network group, complete the following steps Click the Network Groups tab Editing a network group To edit a network group, complete the following steps Copying a network group To copy a network group, complete the following steps Click OK on the Duplicate Network Group dialog box Deleting a network group Service configurationTo delete a network group, complete the following steps Viewing existing services Creating a service TCP UDP Editing a service Copying a service Deleting a service Service group configuration Viewing existing service groupsClick the Service Groups tab Review the List of Service Groups table To create a service group, complete the following steps Creating a service groupClick Add Add Service Group dialog box displays Editing a service group To edit a service, complete the following steps To copy a service, complete the following steps Copying a service groupClick OK on the Duplicate Service Group dialog box Deleting a service group Media Access Control MAC filter managementMedia Access Control MAC filter management Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Click OK on the MAC Filter Saved Configurations dialog box Editing a MAC filter Copying a MAC filter 626 53-1003056-01 Deleting a MAC filter Assigning MAC filters Adding a MAC filter configuration to an interface Clearing MAC filter assignments Security configuration deployment Security configuration deployment Deploying a security configuration on demand Saving a security configuration deployment Click OK on the Deploy to Products Layer 2 ACL dialog box Scheduling a security configuration deployment Deploy to Product/Ports dialog box Edit Layer 2 ACL Configuration dialog box displays Select an ACL in the list and click Edit 634 53-1003056-01 635 636 53-1003056-01 Zoning Zoning overview Online zoning Green Zone Offline zoning Zoning naming conventions Zoning configuration Configuring zoningZone database size Zone database size Viewing zone properties Creating a zoneClick New Zone Select Save to Switch from the Zone DB Operation list Zoning configurationAdding members to a zone Removing a member from a zone Creating a member in a zoneClick New Member Renaming a zone Deleting a zone Duplicating a zone Enabling or disabling the default zone for fabrics Select Configure Zoning FabricCustomizing the zone member display Click Zoning Policies Editing a zone alias Creating a zone aliasClick New Alias Removing an object from a zone alias Exporting zone aliases Renaming a zone aliasDeleting a zone alias Click Export Alias Click New Configuration Creating a zone configurationDuplicating a zone alias Viewing zone configuration properties Adding zones to a zone configurationRemoving a zone from a zone configuration Zone Configuration Properties dialog box displays Activating a zone configuration Click Activate Click the Active Zone Configuration tab Deactivating a zone configurationClick Deactivate Renaming a zone configuration Deleting a zone configuration Duplicating a zone configuration Creating an offline zone database Deleting an offline zone database Select Delete from the Zone DB Operation list Merging fabrics Refreshing a zone databaseSelect Refresh from the Zone DB Operation list Merging two zone databases Select Compare from the Zone DB Operation list Creating a common active zone configuration in two fabrics Saving a zone database to a switch Exporting an offline zone databaseYou cannot export an online zone database Select an offline zone database from the Zone DB list Importing an offline zone database Zoning administrationRolling back changes to the offline zone database Comparing zone databases To compare two zone databases, complete the following steps Managing zone configuration comparison alerts Setting change limits on zoning activation Clearing the fabric zone database Removing all user names from a zone database Finding a member in one or more zonesSelect Clear All from the Zone DB Operation list Select Undo CheckOut from the Zone DB Operation list Finding a zone configuration member in the zones list Finding zones in a zone configurationFinding a zone member in the potential member list Listing zone members Listing un-zoned members Replacing zone members Removing an offline deviceClick OK on the Offline Device Management dialog box Replacing an offline device by WWN Replacing an offline device by name 670 53-1003056-01 Port Fencing About port fencing Viewing port fencing configurations About port fencing 673 Thresholds C3 Discard Frames threshold Link Reset threshold Protocol error thresholdInvalid CRCs threshold Invalid words threshold Adding thresholds State Change thresholdAdding a C3 Discard Frames threshold Adding thresholds Port Fencing dialog box Add C3 Discard Frames Threshold dialog box displays Adding an Invalid CRCs threshold Add Invalid CRCs Threshold dialog box displays Adding an Invalid Words threshold Add Invalid Words Threshold dialog box displays Adding a Link Reset threshold Add Link Reset Threshold dialog box displays Select Protocol Error from the Violation Type list Adding a Protocol Error thresholdAdd Protocol Error Threshold dialog box displays Adding a State Change threshold Add State Change Threshold dialog box displays Assigning thresholds Unblocking a port Avoiding port fencing inheritance Editing a C3 Discard Frames threshold Editing thresholdsClick OK on the Edit C3 Discard Frames Threshold dialog box Editing an Invalid CRCs threshold Editing an Invalid Words thresholdEditing thresholds Click OK on the Edit Invalid CRCs Threshold dialog box Editing a Link Reset threshold Editing a Protocol Error thresholdClick OK on the Edit Link Reset Threshold dialog box Click OK on the Edit Invalid Words Threshold dialog box Click OK on the Edit Protocol Error Threshold dialog box Editing a State Change threshold Viewing thresholds Finding assigned thresholdsViewing all thresholds on a specific Fabric OS device Removing thresholds Removing thresholds from individual objects Removing thresholds from the thresholds table Removing thresholds Ficon configurations Ficon Environments Planning the configuration Configuring a switch for Ficon operationConfiguring a switch for Ficon operation 697 Configuring the switch Select Discover Fabrics Click Add License Click Download 701 Configuring Ficon display Configuring an Allow/Prohibit Matrix 703 Configuring an Allow/Prohibit Matrix manually Click Analyze Zone ConflictsClick Manual Allow/Prohibit Manual Allow/Prohibit dialog box displays, as shown in on Click OK on the Manual Allow/Prohibit dialog box Copying an Allow/Prohibit Matrix configuration Save As/Duplicate dialog box displays, as shown in on 707 Activating an Allow/Prohibit Matrix configuration Deleting an Allow/Prohibit Matrix configurationActivating an Allow/Prohibit Matrix configuration Confirmation message displays, as shown in on Changing the Allow/Prohibit Matrix display Cascaded Ficon fabricChanging window arrangement Clearing port names Configuring a cascaded Ficon fabric Cascaded Ficon fabric Cascaded Ficon fabric merge Enabling DLS 713 Merging two cascaded Ficon fabrics Set up merge options screen displays Specify the Cable length between switch ports Range is form 10 through 500 km. The default is 50 kmResolving merge conflicts TOV 717 Select Configure Port Groups Viewing port groupsPort Groups dialog box displays, as shown in on To view port groups, complete the following steps To edit a port group, complete the following steps Swapping blades Swapping blades Click OK 721 722 53-1003056-01 Element Manager overview IP Element ManagerElement Manager CLI Accessing the IP Element Manager CLI Element Manager CLI Accessing the Element Manager interface Select Configure Element Manager GUIElement Manager interface overview Element Manager interface overview Switch properties Serial #Port Count Build Label 727 Element Manager toolbar Properties dialog box Ports tab Displaying port properties Tx Power Rx PowerTemperature Tx Bias Current Port Mode Comparing physical and virtual port properties Comparing physical port propertiesYou can compare physical and virtual port properties Comparing physical and virtual port properties Search Status indicator iconsTable capabilities Performance data Real-time performance monitoringHistorical performance monitoring Real Time Graph/Table Historical Graph/Table Configuring Vlan Configure dialog boxResetting port counters Enable or Disable Management Module switchoverChanging the standby Management Module to active Switch Fabric Module MR Switch Over Status dialog box Port mirroring Configuring port mirroringPort mirroring Adding a port to port mirroring Select Configure Port MirroringEditing a port in port mirroring SFlow Configuring sFlow in Element ManagerDeleting a port from port mirroring Accessing the Web Management interface Select Configure Element Manager WebWeb Management interface Web Management interface Web Management interface troubleshooting Accessing the IP device front panelSelect Configure Element Manager Front Panel Element Manager Front Panel Configuration Repository and Backup Configuration repository Configuration repository 745 Saving the configuration status 747 Viewing the configuration Comparing product configurations 749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Viewing configuration deviation status Configuration deviationChange tracking 754 53-1003056-01 Configuration snapshots Configuration Snapshots tab displays, as shown in Figure Comparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Saving a configuration snapshot Click Save Snapshot Searching the configuration snaphots Schedule backup Scheduling a configuration backup 763 Disabling a backup schedule Edit Automatic Configuration Backup dialog box displays IP Configuration Wizard Configuration requirements Payloads PayloadsPayload name Description Product Payloads DNS Creating a payload configuration Select Configure Configuration WizardPayload name Description Interface Payloads Creating a payload configuration 769 770 53-1003056-01 Save to Flash Don’t Save to Flash or ReloadSave to Flash and Reload Configuration dialog box Deployment Schedule pane 773 Duplicating a payload configuration Modifying a payload configurationDuplicating a payload configuration Select a configuration from the Product Configurations list Modifying a payload configuration Deleting a payload configuration Deploying a payload configurationDeploying a payload configuration CLI Configuration Management This chapter CLI configuration overview Viewing existing templates Select Configure CLI ConfigurationViewing existing templates Product configuration templates Creating a new product configurationProduct configuration templates To create a new configuration, complete the following steps 780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 Changing product credentials CLI Credentials dialog box Importing parameter values into a configuration Previewing CLI commands Previewing CLI commands Different values for each targetSame value for each target Select a row in the Parameters table Click Preview Copying a product configuration CLI command guidelinesCLI command guidelines Editing a product configuration Testing a configuration To test a configuration, complete the following steps Valid and invalid responses from devices Editing the CLI responses properties file Editing the Network OS CLI responses properties file SuccessresponsestartSuccessresponseend Failureresponseend Configuration command response validation Valid and invalid responses from devices Deleting a configuration Using a dash character in CLI Configuration managerConfiguration error checking To delete a configuration, complete the following steps CLI configuration deployment Deploying a configuration on demand Monitoring configurations Creating a monitoring configuration 796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration Viewing CLI deployment reports CLI deployment reportsSelect Reports Product CLI CLI configuration scheduling Configuring a one-time deployment scheduleConfiguring an hourly deployment schedule Product CLI Report displays Configuring a daily deployment schedule Configuring a weekly deployment scheduleConfiguring a monthly deployment schedule CLI configuration scheduling Configuring a yearly deployment schedule 806 53-1003056-01 Image Repository for IP Products Obtaining software files Boot image management Viewing the list of boot imagesProducts supporting the image import Products supporting the image import Manually importing boot images Select Configure Firmware Management Deploying boot images to products Deleting boot images from the Management application Software image management Viewing the list of software imagesManually importing software images Software image management Automatically retrieving software images from products Click OK on the Import Software Image dialog box Right-clickConfiguration Schedule Backup Schedule Backup dialog box displays, as shown in FigureDeploying software images to products Deleting software images from the Management application Viewing the list of unified images Unified image managementUnified image management Importing unified images into the Management application Import Firmware Image from File dialog box displays Click OK on the Manual Import Unified Image dialog box Updating unified images Deploying unified images to productsDeleting unified images from the Management application Complete the following steps Serial firmware update and activation for NOS devices Vlan Management Default VlanVlan Manager Super-aggregated Vlan Remote Switched Port AnalyzerPrivate Vlan Configuration requirements for Vlan Manager Transparent LAN Support Feature VCS FC mode Logical chassis mode Standalone mode Displaying a list of VLANsVlan management in a VCS environment Vlan Manager tabs Displaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Port VLANs Adding or modifying port VLANs 828 53-1003056-01 Adding or modifying dual mode ports Select Configuration Manager Vlan Manager L2 mode Tagged mode Assigning DCB ports to a Vlan Adding Vlan properties 832 53-1003056-01 Modifying port Vlan properties Deleting port VLANs from productsDeleting a port Vlan in Vlan view Deleting a port Vlan in Product view Spanning Tree Protocol configuration Deploying Vlan configurationsSpanning Tree Protocol configuration Select a Save Configuration option Configuring STP or Rstp on a port Vlan Target context STP type IOS Vlan STP, RstpSTP, RSTP, Mstp FOS Vlan Mstp Deploying an STP configuration on a port Vlan Configuring Mstp on a product Assigning an Mstp instance to a Vlan Adding an Mstp instance Managing IP addresses on an SVI Vlan routingVlan routing Deploy IP Configuration dialog box Select a Save Configurations option Vlan routing Click the Deploy now option Mpls pre-configuration Mpls Management Mpls Licensed and Configured Products group Mpls licensing Configuring LDP Mpls overview LSP Select Configure Mpls LSP Viewing LSP Admin Group informationSelect the Admin Groups tab Figure Viewing LSP path information Select the Paths tab Figure Viewing Rsvp LSP information Select the Rsvp LSPs tab Figure Viewing saved LSP configurations Related topics Mpls overview Adding an LSP admin group LSP Editing an LSP admin group Duplicating an LSP admin group Deleting an LSP admin group Adding an LSP path Editing an LSP path You can edit an LSP path by taking the following steps Duplicating an LSP path LSP Delete Path Configuration wizard displays FigureDeleting an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Delete Rsvp LSP Configuration wizard displays Figure Editing an Rsvp LSPDuplicating an Rsvp LSP Deleting an Rsvp LSP Editing a saved LSP configuration Duplicating a saved LSP configurationSelect the saved configuration Click the Edit button Select the saved configuration Click the Duplicate button Deleting a saved LSP configuration Select the saved configuration Click the Delete buttonDisplaying LSP Topologies Select Monitor Mpls LSP Topology LSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 VLL manager Select Configure Mpls VLLViewing VLL instances VLL Mode Status Tag Mode Viewing Saved VLL configurations To view current saved VLL configurations, do the following Adding or editing a VLL instance To add a new VLL instance do the following Configuring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box Deploying target actions using the VLL Manager VLL Configuration wizard Deploy Target Actions dialog box Deploying VLL properties using the VLL Manager VLL configuration wizard Deployment Properties Scheduling deployment using the VLL Manager VLL configuration wizard Deployment Schedule dialog box Reviewing the VLL Manager configuration Reviewing the VLL Manager summary Creating a new VLL instance using duplicate Editing a VLL instanceDeleting VLL instances To edit a VLL instance, do the following Select Monitor Mpls VLL Filtering VLL traffic monitoringVLL Monitor Dialog box displays Figure Virtual Private LAN Services Vpls overview VLL 883 Select Configure Mpls Vpls Vpls ManagerViewing Vpls instances and peer topologies Vpls Manager Vpls settings Endpoint settings PE Devices Vpls Manager Peer Topology tab Viewing Saved Vpls configurations To view current Vpls configurations, do the following Adding or editing a Vpls instance Configuring devices using the Vpls Manager Vpls Configuration wizard Device Configuration dialog box Configuring endpoint settings Row is added to the Configured Endpoint Settings list Deploying target actions using Vpls Manager Deployment Properties page displays Figure Deploying Vpls properties using Vpls Manager Vpls Configuration wizard Deployment Properties dialog box Scheduling deployment using Vpls Manager Vpls Configuration wizard Deployment Schedule dialog box Reviewing the Vpls Manager summary Creating a new Vpls instance from a duplicate Deleting a Vpls instance Editing a Vpls instanceTo edit a Vpls instance, do the following Select Monitor Mpls Vpls Filtering for Vpls traffic monitoringVpls Monitor dialog box displays Figure Select Configure Mpls Vcid Pool Vcid poolsViewing, creating, and deleting Vcid pools Vcid pools 802.1ag Connectivity Fault Management Configuring a maintenance association Add Maintenance Association dialog box displays 802.1ag CFM 900 53-1003056-01 Editing a maintenance association 802.1ag Connectivity Fault ManagementClick Close on the Configure 802.1ag CFM dialog box Edit Maintenance Association dialog box displays 902 53-1003056-01 903 Adding a MEP to a maintenance association 28 802.1ag Connectivity Fault Management 905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Sending a linktrace message Click Loopback Click Linktrace Configuring frame delay 915 916 53-1003056-01 Select Configure Application Delivery VIP Servers VIP ServersVIP Servers overview Viewing the VIP Servers Viewing the VIP Servers Viewing VIP Server information Viewing VIP Server information VIP Servers list Enabling or disabling servers or server ports Server port statisticsEnabling servers or server ports Disabling servers or server ports Deleting a row from the Server Port Statistics list Global Server Load Balancing Gslb Manager Viewing the Gslb Manager Select Configure Application Delivery GslbTo view the Gslb Manager, perform the following steps Gslb policy management Creating a Gslb policyGslb policy management To create a Gslb policy, perform the following steps 926 53-1003056-01 Applying metrics on the Metrics tab Connection Load Weights Adding a prefix on the Prefix tab Deleting a prefix from the Prefix list Importing IP addresses from a file 930 53-1003056-01 Gslb site management Adding a site configurationGslb site management Adding ServerIron ADX products to the site Gslb zone configuration Adding a zone configurationGslb zone configuration Managing zones Add Hosts dialog box Adding a host to a zone Deleting a zone configuration Editing the list of IP addresses and weightsList of IP Addresses and Weights dialog box displays Controller configuration Controller configurationController Configuration tab displays Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL Certificates for ServerIron Products SSL certificates SSL certificate configuration Accessing SSL certificates on the Certificate View tabSSL Certificates dialog box has two tabs Certificate View tab Figure Product View tab Figure 945 Accessing SSL certificates on the Product View tab SSL Certificates dialog box Product View tab Generating a certificate signing request 948 53-1003056-01 949 Adding an SSL certificate and key file Related topic Editing an SSL certificate and key file Duplicating an SSL certificate and key file Viewing SSL certificate details Importing certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Appending SSL certificates Chaining SSL certificates 960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Editing a deployment configuration Select Configure Task SchedulerDeployment Manager Introduction to the Deployment Manager Duplicating a deployment configuration Deleting a deployment configuration Deploying a configurationViewing deployment logs Generating a deployment report Generating a deployment configuration snapshot report Searching the configuration snapshots 967 968 53-1003056-01 Performance Data SAN performance overview SAN performance measures SAN performance overview Example of default access control list SAN performance management requirements Example of Snmp Example of setting Snmp 974 53-1003056-01 Snmp SET Snmp GETFCIP-MIB YES SAN real-time performance data Generating a real-time performance graphSAN real-time performance data Select Monitor Performance Real-Time Graph Real Time Performance Graphs dialog box displays Filtering real-time performance dataOpen the Real Time Performance Graphs dialog box Graph display Exporting real-time performance data Performance statistics countersProtocol Fcip Snmp Http HBA, CNA HCM APIFC, GE HBA, CNA Type Protocol Source OID value IP configuration requirements IP performance monitoring and traffic analysis Monitoring real-time performance IP real-time performance monitoringIP real-time performance monitoring 984 53-1003056-01 Removing products and ports from real-time performance Adding products and ports to real-time performanceClick Sources from the Real Time Graphs/Tables dialog box Adding measures to products Removing measures from productsSelect measures Real Time Graphs/Tables dialog box displays Click Mibs tab in the Available Measures area Adding measures to ports Removing measures from ports Adding collectibles to monitoring Configuring the performance graph display Configuring the performance graphRemoving collectibles from monitoring Show data points graph Configuring graph options Minutes Hours Day Graph Options dialog box Historical Graphs/Tables dialog box 993 Exporting a graph Printing a graphChoose Export File Format dialog box displays Spreadsheet .csv Image .png IP historical performance monitoring Editing system collectors Displaying historical data collectorsIP historical performance monitoring Name Collector Basics 997 Enabling a historical data collector Adding or editing a historical data collector 999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Adding third-party device MIB objects manually Configuring a MIB walk instanceDuplicating a historical data collector Deleting a historical data collector Adding, editing, or duplicating a user-defined expressionDuplicating system data collectors Select Monitor Performance Historical Data Collectors 1007 Deleting an expression Complete the following steps to delete an expression Viewing Historical Graphs/Tables Select the Data Monitoring tab NetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs MIB data collectors Mapping a MIB object to a unit nameMIB data collectors To map a MIB name, use the following format IP Custom performance reports Creating a custom reportIP Custom performance reports Complete the following steps to create a report 1015 Time Settings Sampling Granularity 1017 Click the Identification tab Interpreting the Snmp Monitor report Exporting an Snmp Monitor report Configuring sFlow IP sFlow configurationIP sFlow configuration Interface Payload sFlow Settings dialog box displays IP sFlow configuration Click NextInterface Speed Sampling rate Product Payload SFlow Destination dialog box displays Click Next Creating custom sFlow reports Select the Report Definitions tab IP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Select the User Identification tab Add Report Definitions dialog box, User Identification tab Add Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Scheduling custom sFlow reports Select Monitor Traffic Analysis Custom Reports 1035 1036 53-1003056-01 IP Traffic analyzer monitoring and sFlow reports Device-level configuration requirementsSuspending a custom sFlow report schedule 802.1X configuration requirements Displaying sFlow monitoring reportsIP Traffic analyzer monitoring and sFlow reports Select Monitor Traffic Analysis Monitor sFlow Selecting a report Report list Measure list Interpreting an sFlow traffic report Save and close the ipconfig.properties fileThis field shows the date and time the report was requested Viewing top MAC talkers Viewing top Vlan talkers Category list, select L3/L4 Reports Viewing all Layer 3 and Layer 4 traffic Viewing all IPv4 Layer 3 or Layer 4 Top Talkers Viewing IPv4 top TCP talkers Reports list, select IPV4 Next list, select TCP TCP Viewing IPv4 top UDP talkers Category list, select L3 or L4 Reports Viewing IPv4 top Icmp talkersIcmp Viewing IPv4 Others Viewing IPv6 Top Talkers Viewing other Layer 3 or Layer 4 Top Talkers Enabling and viewing TCP reports Defining invalid TCP packet combinationsRST-SYN RST-FIN RST-PSH RST-URG FIN-SYN Complete the following steps to change these combinations Valid TCP flags report Displaying the invalid TCP Flags reportType list, select Invalid TCP Flags Viewing BGP paths report Viewing VCS fabric Top Talker reports Troubleshooting sFlow reports IP traffic accountingIP traffic accounting Select Monitor Traffic Analysis Traffic Accounting 1055 1056 53-1003056-01 Frame Monitor Frame Monitor Scsi Frame typesScsi RW Creating a custom frame monitor Frame Monitoring requirements Frame Monitor Configuration Status dialog box Editing a frame monitor Assigning a frame monitor to a port Finding frame monitor assignments Removing a frame monitor from a port Removing a frame monitor from a switch 1064 53-1003056-01 Power Center Power center overview Data monitoring Select Monitor Power CenterViewing PoE data for products Viewing PoE data for ports To view PoE data for a port, complete the following steps Filtering port details To filter port details, complete the following steps Viewing attached device properties 1070 53-1003056-01 Viewing PoE charts To view a PoE chart, complete the following steps 1072 53-1003056-01 1073 Refreshing PoE data PoE power on demand Configuring automatic data refreshPowering up PoE-capable ports on demand PoE power on demand Powering down PoE-capable ports on demand Schedule PoE power deployment Scheduling an power up deployment Schedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Click Show Ports Scheduled Ports ScheduleName dialog box displays Deleting a power deployment schedule Adding a PoE product threshold PoE thresholdsPoE thresholds PoE Allocation PoE Consumption Consumption % Adding a PoE port threshold Thresholds dialog box Choose one of the following measures Port allocation Port consumption Port consumption % Viewing PoE thresholds To view PoE thresholds, complete the following steps To update a PoE threshold, complete the following steps Updating a PoE threshold To enable PoE thresholds, complete the following steps To disable PoE thresholds, complete the following stepsEnabling PoE thresholds Disabling PoE thresholds Monitoring real time power performance on products Viewing PoE performanceDeleting PoE thresholds Viewing PoE performance 1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy Monitor Policy monitor overview Fabric policy monitors Policy monitor overview Switch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Preconfigured policy monitors Next Run Next time the policy will run using the formatManagement policy monitor Frequency Weekly Viewing policy monitor status Viewing existing policy monitors Adding a policy monitor Select Monitor Policy Monitor 1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Configuring a one-time policy monitor schedule Policy monitor scheduling Configuring an hourly policy monitor schedule Configuring a daily policy monitor scheduleConfiguring a weekly policy monitor schedule Configuring a monthly policy monitor schedule Editing a policy monitor Deleting a policy monitor Viewing a predefined configuration rule Configuration rulesPredefined configuration rules Configuration rules Port Profile Interface Rule expressions Viewing configuration rule detailsAdd Configuration Rule dialog box displays Figure 1118 53-1003056-01 1119 Adding a configuration rule Click Cancel on the Add Configuration Rule dialog box Duplicating a configuration rule Click OK on the Add Configuration Rule dialog box Click the Switch/Router Checks tab Editing a configuration ruleClick Add Configuration Rule Exporting a configuration rule Importing a configuration ruleDeleting a configuration rule Click OK on the Edit Configuration Rule dialog box Adding a configuration condition Viewing predefined configuration conditionsAdd Configuration Rule dialog box displays Select Add Condition Add Condition dialog box displays Figure Duplicating a configuration condition Selecting a product Editing a user-defined configuration condition You cannot edit a predefined configuration condition Predefined conditions Configuration rules Predefined conditions Viewing a predefined configuration block Policy Monitor dialog box displays Click Add Adding a configuration block Configuration rules Add Monitor dialog box displaysSelect Add Block Add Block dialog box displays Figure Duplicating a configuration block Select the Switch/Router Checks tab Editing a user-defined configuration block You cannot edit a predefined configuration block Predefined blocks Deleting conditions and blocksClick Delete Click Yes on the confirmation message Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report 1137 Exporting a policy monitor report Click Export File Download dialog box displays Click Save Viewing historical reports for all policy monitors Viewing historical reports for a policy monitorPolicy Monitor dialog box displays Click History Viewing historical reports for a policy monitor Fault Management Fault management overview Event notification RestrictionsSupported IP address types Event Purging 1143 Defining filters Setting up basic event filteringDefining filters Setting up advanced event filtering Click Advanced 1146 53-1003056-01 Snmp traps Adding a trap recipient to one or more switches Select Monitor Snmp Setup Product Trap RecipientsSnmp traps Snmp Trap Recipients dialog box, shown in , displays Removing a trap recipient from one or more switches Select Monitor Snmp Setup Trap ForwardingSnmp trap forwarding Snmp Trap Forwarding dialog box, shown in , displays Select the Enable trap forwarding check box Adding a trap destination Adding a new trap filter 1152 53-1003056-01 Event reception Event Reception dialog box, shown in , displays Do not accept Snmp v1/v2c trapsAccept Snmp v1/v2c traps with any community string Accept Snmp v1/v2c traps with only these community strings Privacy protocol Authentication Result Credential type Snmp traps Snmp security and authenticationAdding an Snmp v3 credential Adding an Snmp v1 or v2c community string Importing a new MIB into the Management application Trap customization Registering traps Customizing a registered trap definition Unregistering a registered trapClick the Registered button Reverting the customization of a registered trap to default Snmp informsEnabling or disabling Snmp informs Select a product group from the Fabric / Products list Syslogs Adding a syslog recipient Syslogs Removing a syslog recipientTo remove a syslog recipient, complete the following steps Select Monitor Syslog Configuration Syslog Forwarding Select the Enable syslog forwarding check boxAdding a syslog forwarding destination Syslog Forwarding dialog box, shown in , displays Adding a syslog filter 1165 Event action definitions Snort message forwardingCreating an event action definition Select Monitor Event Processing Event Actions Selecting an event for an event action Event action definitions 1168 53-1003056-01 Configuring varbind filters Selecting source address products and ports Sources pane of the Add Event Action dialog box Click Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Special events handling Acknowledging special events 1177 Configuring event action e-mail settings Click Cancel to cancel the operation Modifying an event action definition Configuring event actions for Snort messages Deleting an event action definition Click the Import Snort Rule button Pseudo eventsImport Snort Rule File dialog box displays, shown in Figure Displaying pseudo event definitions Creating pseudo event definitionsSelect Monitor Event Processing Pseudo Events Pseudo Events dialog box, shown in , displays Setting pseudo event policies Filtering pseudo event traps 1185 Editing a pseudo event definition Deleting a pseudo event definition Adding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Event custom reports Defining report settingsSelect Reports Event Custom Reports Defining the report identity 1196 53-1003056-01 Filtering a report definition To filter a report definition, complete the following steps Add/Edit Report Definition dialog box Filter tab Filtering report events by date and time Add/Edit Report Definition dialog box Product tab displays 1200 53-1003056-01 Editing a report definition Deleting a report definition Event custom report schedulesEvent custom report schedules Adding or editing an event report schedule One Time Event logs Viewing event logsCopying part of a log entry Event logs Copying an entire log entry Exporting the entire log Mailing selected event details from the Master Log Mailing all event details from the Master LogDisplaying event properties from the Master Log Click Close to close the Event Properties dialog box Event logs Event PropertiesEvent Field Description Copying part of the Master Log Copying the entire Master LogExporting the Master Log Select Table Copy Table Filtering events in the Master Log ‘unnamed’ filter ‘none’ filter Editing a FilterDuplicating a Filter Deleting a Filter Configuring packet captures Select Configure Packet Capture PcapConfigure Pcap dialog box, shown in , displays Packet Capture Pcap 1214 53-1003056-01 Server and client support save Technical SupportCapturing Server and Client support save data Capturing Server support save data Capturing Client support save data Client support save using a command line interface Server and client support save Device technical support Scheduling technical support information collectionDevice technical support Click the Schedule tab Select the Enable scheduled Technical Support Data check box 1221 Starting immediate technical support information collection Click OK on the Technical SupportSave dialog box Click the Generate Now tab, if necessary Click Close on the Technical SupportSave Status dialog box Field DescriptionFirmware Type Progress Type Default location Default naming convention Viewing the technical support repository Saving technical support information to another location Click OK on the Technical Support Repository dialog boxAvailable SupportSave Mail button Mailing technical support information Deleting technical support files from the repository Select the file you want to delete in the table Click Delete 1229 1230 53-1003056-01 Reports Reports overviewViewing IP reports Browser requirements Exporting and saving IP reports to a file Exporting IP reports to e-mail recipientsSelect Export as Html Select Export as CSV Select E-mail as Html Select E-mail as CSV IP report contents IP Wired Products report IP Wired Products report Export button Detailed Product ReportStacking Units Stacking Port RealtimeModules IP Addresses Cluster Peer MCT Physical PortsGRE Tunnels Controller Cluster Detailed Cluster Report AP List Count System Name values System InformationNodes FC Ports IP Module reportPhysical Media IP Layer 3 Vlan report IP Port VLANs reportField/ComponentDescription IP Subnet report IP Subnet report Layer 3 Vlan report fields and components IP Address report MAC Address reportIP Address report Port Name IP Stacking Ports Realtime report IP Physical Ports Realtime reportIP Physical Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime report IP Deployment reports Viewing a deployment reportIP Deployment reports Select Reports Deployment Preconfigured reports Reports Template Manager overviewUser-defined reports Reports Template Manager overview Select Reports Report Manager Accessing the Report Template ManagerReport Template Manager dialog box displays Figure Viewing a report Exporting a report template Importing a report templateDeleting reports Report content and functions Products List report Product Count IP address of the product Displayed for products that support stacking Physical port information for each port on the product Cluster Product Report Ports Tx/Rx Ratio report Summary table Location Device NameDetailed Product Report Total Received MB Max Tx Utilization % Low Traffic Ports reportMax Rx Utilization % Exporting data from the report Menu Command Command Options Application menusThis appendix Dashboard main menus Command Command Options IP main menusIP main menus Edit Menu Discover Menu Configure Menu Element Manager. Select to configure a selected device Lsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu IP shortcut menus IP shortcut menusTools Menu Component Menu/Submenu Commands Comments IP shortcut menus IP SubnetIronWare device Launches the Real-Time Graphs / Tables dialog box DCB L2 ACL VCS/VDX Third-party device 1273 1274 53-1003056-01 Call Home Event Tables IP Call Home EventNetwork OS Call Home Event Event reason code FRU code/Event type Description Severity Call Home Event Tables Network OS Call Home Event Event Categories Product status events Product audit events Security events Security events for FC devicesSecurity events for IP devices Security events User action events Management server events Product events IP Performance monitoring eventsProduct events Trap name IP Performance monitoring events User Privileges About user privileges About user privileges Application privileges and behavior Privilege Description No Privilege Read-Only Read/Write Setup Mail server used to Send e-mail Disables Event Event Notification Setup button in the Users dialog box Options command RegistrationForwarding dialog box Monitor menu Event Storage option Syslog Registration Management command Enables the Security L2Update and OK Performance Graphs dialog box and enables all controls Disables Policy Monitor Enables Policy Monitor Policy monitors Command on the Monitor Menu Logs menu Configure Switch Replicate menuServer Options menu SupportSave, Upload Repository command Upload Failure Data View Repository Technical Support menu Repository commandsCapture, and View Monitor Technical 1291 Cancel and Help buttons ZoningCompare/Merge dialog Compare and Export Switch, Activate Compare/Merge dialog Zone Config tab Lsan Zoning Device Edit Limits commandZoning Scope list does About user privileges IP privileges and behavior IP CLI IP L3 ACL Filter IP Mpls VLL IP Mpls VplsIP MPLS- LSP Profile tab About Roles and Access Levels IP privileges and behavior About Roles and Access LevelsApplication Features and Role Access Levels 1299 IP Mpls LSP Viewing SAN device properties Device PropertiesViewing Fabric properties Viewing SAN device properties Fabric properties Viewing SAN device propertiesClick OK on the FabricName Properties dialog box to close Viewing SAN device properties Device properties Preshared key configured Remote Switch NameRemote Switch IP Remote Switch WWN ICL Viewing Storage propertiesSelect Edit Properties Viewing SAN device properties Viewing iSCSI Properties dialog box Command Descriptor Block Count Digest Error CountISCSI Service ISNS Service Viewing port properties Class of Service Additional Port InfoAddress Active FC4 Types Viewing SAN device properties Port properties Long Distance Setting ISCSI buttonISCSI Capable Locked Port Type Symbolic Name Troubleshooting listPort Speed Gb/s Port State IP device properties Viewing IP device and port propertiesIP device properties Port properties User Port # VCS Mode Config ModeDetailed Report button Alias IP device properties Profile Mode Access Points tabPort Profiles tab Show list Connected switch \ Port Transceiver TemperatureChassis-Power Supply section of Detailed Report Device MAC Viewing VCS fabric properties Licensed Features Access Gateway ModeNodes tab Fabric Status MAC Count VLANsDomain Count Associated MACs list Native VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port Host properties Host propertiesSFP/Port Optics Viewing adapter port properties Field Description Host properties Adapter port properties Properties customization Adding a property fieldProperties customization Adapter port properties Click OK to close Editing a property field Deleting a property field Editing a property field directly Properties customization Characters Regular ExpressionsConstruct Matches Regular Expressions Characters Character classesPredefined character classes Posix character classes US-ASCII only Regular Expressions Posix character classes US-ASCII only Java.lang.Character classes simple java character typeClasses for Unicode blocks and categories Boundary matches Regular Expressions Greedy quantifiers Reluctant quantifiersPossessive quantifiers Logical operators Regular Expressions Back references Special constructs non-capturing Regular Expressions CLI Templates CLI Templates HyperEdge Stack Enable HyperEdge Stack DisableHyperEdge Stack Port Creation HyperEdge Stack Port Deletion IronWare OS Enable Web Element Manager IronWare OS Configure L3-Access-ListCLI Templates HyperEdge Stack Trunk Deletion HyperEdge Peri Port Creation CLI Templates IronWare OS Configure L2-Access-List MCT Cluster CreationMCT Cluster Deployment MCT Cluster Undeployment Mpls Loopback Interface Configuration Mpls Core Interface ConfigurationCLI Templates MCT Cluster Deletion MCT Client Creation CLI Templates Mpls Endpoint Configuration Network OS Configure CRC Align Errors MonitorNetwork OS Associate MAC to Port Profile Ampp Network OS Configure Inter Frame Gap Violation Fencing CLI Templates Network OS Configure Extended L2 Access ListNetwork OS Configure Inter Frame Gap Violation Monitor Network OS Configure Standard L2 Access List Network OS Configure RX Symbol Errors MonitorNetwork OS Create CoS Mutation Map CLI Templates Network OS Create Lldp Profile Network OS Create Port ProfileNetwork OS Create Traffic Class Map Network OS Create Vlan Classifier Group Network OS Update ACL on Port Profile Network OS Update QoS on Port ProfileNetwork OS Update Vlan on Port Profile CLI Templates Network OS Create Vlan Classifier Rule CLI Templates Private Vlan Configure Vlan as a Pvlan Private Vlan Delete Pvlan configuration from VlanPrivate Vlan Configure Pvaln mode in L2 interface Private Vlan Add native Vlan mode to Pvlan trunk Private Vlan Delete Pvlan mapping from promiscuous port Private Vlan Delete Pvlan associations from host portPrivate Vlan Delete Pvaln associations from trunk port $PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGER VRF Route Distinguisher Configuration VRF Maximum routes configuration for IPV4 Address FamilyVRF Route Targets Export and/or Import Configuration VRF Delete Route Targets Export and/or Import Configuration IronWare OS Vlan Configure virtual routing interface IronWare OS Vlan Enable Spanning Tree Protocol on IOS VlanCLI Templates VRF Display VRF Information IronWare OS Vlan Remove interfaces from Vlan as untagged Network OS Vlan Layer2 Switch Port Configuration Network OS Vlan Native Vlan ConfigurationNetwork OS Vlan Vlan Interface Creation Network OS Vlan Vlan Interface Deletion Network OS Vlan Disable Access Interface Configuration Network OS Vlan Access Interface ConfigurationNetwork OS Vlan Enable Spanning Tree Protocol on NOS Vlan 1356 53-1003056-01 Troubleshooting Application Configuration Wizard troubleshooting Browser troubleshooting Client browser troubleshooting Configuration backup and restore troubleshootingElement Manager troubleshooting Client browser troubleshooting Firmware download troubleshooting Firmware download troubleshooting Sw0FID128admin sshutil delknownhost Launch Client troubleshooting Launch Client troubleshootingSelect Start Settings Control Panel Java Master Log and Switch Console troubleshooting Master Log and Switch Console troubleshootingUnix operating systems Patch troubleshooting Patch troubleshootingClick the Global Settings tab Select Discover IP Products Server troubleshooting Professional edition login troubleshootingProfessional edition login troubleshooting Server Management Console troubleshooting Server Management Console troubleshootingManagement console errors Supportsave troubleshooting Supportsave troubleshootingSelect Properties Technical support data collection troubleshooting Wireless troubleshootingTechnical support data collection troubleshooting Problem Master log warning message Zoning troubleshooting Zoning troubleshooting Wireless troubleshooting Zoning troubleshooting Achcallcenterconfig Database FieldsDatabase tables and fields Achcallcenter Database tables and fields Achevent AcheventfiltermapAchfilter Achinfo Adapterportconfigdetails AdapterportconfigpropertyAdapterdriverfiledetails Aordevicegroupmap Aordevicemap AorfabricmapAorhostmap Aorinmportgroupmap Birtreportparameter AvailableflyoverpropertyBirtreportruntemplate Birtreportscheduleconfig BootimagedrivermapBootimagefiledetails Database tables and fields Birtreportruntemplate Database tables and fields Bootimagefiledetails BootlunsequenceBootlunsequencedetail Capability Database tables and fields Card Cardcapability CedapplicationCedapplicationmember Ceduserpreference Cfgbackuparchive Ceeport Changelog Database tables and fields CfgbackuparchiveClitemplate Database tables and fields Clitemplate Clientview Clientviewcolumn ClientviewmemberClientviewmemberhost Cluster Cnaethport CnaethportconfigCnaproductconnectivity Cnaport Database tables and fields CnaethportconfigCollector Configblock CollectormibobjectentryCollectorsnmpexpressionentry Collectortargetentry Configcondition Coreswitch Database tables and fields Coreswitch Coreswitchcapability CoreswitchchecksumCoreswitchcollection Coreswitchdetails Database tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Database tables and fields Cryptoswitch Cryptotargetcontainer Customfavoritesobjectlist Database tables and fields CryptotargetcontainerDashboard Database tables and fields Dashboard DashboardcanvasDashboardcanvaspreference Dashboardprovider Dashboardwidget Database tables and fields Dashboardwidget DefaultfavoritesDashboardwidgetpreference Defaultwidgetpreference Database tables and fields DefaultfavoritesDeploymentconfiguration Deploymenthandler Database tables and fields DeploymentconfigurationDeploymentproductstatus Deploymentreporttemplate Database tables and fields DeploymentproductstatusDeploymentstatus Deploymenttargetmap Device Database tables and fields Device Tacpasswordportcfg TacpasswordreadonlyTacpluspasswordportcfg Tacpluspasswordreadonl Licensedfeatures TrapregisteredPortcount Mplsmanagestate Isdcbswitch ProductfamilyNetconftransport =SSH =HTTPS =WINGHTTPS Poecapable Isprincipalswitch WirelesstypeVcsid Vcslicensed Deviceconnection Deviceenclosure Database tables and fields Deviceenclosure Deviceenclosuremember Devicefdmidetails Devicegroup Database tables and fields DevicefdmidetailsDevicegroupentry Devicemacgroupmapping Database tables and fields DevicegroupDevicenode Database tables and fields Devicenode Deviceport Deviceportgigeportlink Deviceportmacaddressmap Diskusage Encryptionengine Database tables and fields Encryptionengine Encryptiongroup Database tables and fields Encryptiongroup Encryptiongroupmember Encryptionkmipparameters Ethernetcloud EncryptiontapepoolEthernetisl Event Database tables and fields Ethernetisl Database tables and fields Event EventcallhomeEventcategory Eventdescription Eventdetails Eventfwdfilter Eventinstance Database tables and fields EventfwdfilterEventmodule Eventorigin EventnotificationEventpolicy Database tables and fields Eventpolicy Eventpolicysourceentry Database tables and fields Eventpolicysourceentry EventruleEventprocessormap Database tables and fields Eventrule FabricEventruleaction Database tables and fields Fabric Fabricchecksum Fabriccollection Database tables and fields Fabriccollection FabricdiscoverypolicyFabricdiscoverypolicyrule Fabricmember Fabricthresholdsetting FavoritesDatabase tables and fields Fabricmember Fabricvcsclustermap Fcipcircuitportmap Database tables and fields FavoritesFcipporttunnelmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Mismatchedconfigurations SecurityflagCircuitstatus Circuitstatusstring Fciptunnelperformance Feature FeatureeditionmapFeaturesusage Fcoedevice Ficondeviceport Database tables and fields FeaturesusageFirmwarefiledetail Foundrydevice FirmwareswitchdetailFoundrymodule Database tables and fields Foundrymodule FoundryphysicaldeviceFoundryphysicalport Fporttrunkgroup FRU Database tables and fields FRU FtpserverGeneratedreport Gigeport Database tables and fields Generatedreport Gigeportethernetcloudlink GigeportstatsGlobalvlan Gretunnelinterface Hacluster HBA Database tables and fields HBA Hbaport Hbanodemap Switchip OperatingtopologySUPPORTEDFC4TYPES Supportedcos Hbaportdetail Database tables and fields Hbaportdetail Hbaportdeviceportmap Hbaportfcoedetails Database tables and fields Hbaportfcoedetails Hbaremoteport Database tables and fields Hbaremoteport Hbaremoteportlun Hbatarget HealthstatusHealthtargetstatus Hostdiscoveryoption Hostdiscoveryreqgroup Database tables and fields HostdiscoveryoptionHostdiscoveryrequest Database tables and fields Hostdiscoveryrequest Hypervvirtualmachine IFL HypervvmhbaportmapInterface Database tables and fields Interface InterfacedeploymentconfigIpdevicelicense Ipinterface Database tables and fields IpdevicelicenseIpportgroup Iproute IpsubnetvlanIpxnetworkvlan ISL Sourceswitchportid TargetswitchportidDatabase tables and fields ISL Islconnection Isltrunkgroup MasterconnectionidSourcemasterport Targetmasterport Isltrunkmember L2ACCESSCONTROLENTRYKeyvault Database tables and fields L2ACCESSCONTROLENTRY L2ACCESSCONTROLLISTL2ACLDEVICEDEPLOYMAP L2ACLINTERFACEDEPLOYMAP Database tables and fields L2ACLINTERFACEDEPLOYMAP L2NEIGHBORL3ACLDEVICEDEPLOYMENTMAP L3ACLINTDEPLOYMENTMAP Database tables and fields L3ACLINTDEPLOYMENTMAP LAGLagmember Database tables and fields Lagmember LastconfigupdatetimeLaunchincontextmodule Database tables and fields Launchincontextmodule LicenseLicensedowngradedetails Licensefeaturemap LicensedfeatureDatabase tables and fields Licensedowngradedetails Licenserule Lsantagconfig LockLsandevice Lsanproxydevice Lsanzonedbconfig LsanzoneLsanzonemember Mctclient Database tables and fields Macfilter MacfilterdevdeploymentmapMacfilterintdeploymentmap Macgroup Macgroup MapseventMacgroupmember Managedelement Mapseventdetails Database tables and fields MapseventMapseventcauseaction Marchingants MapspolicyMeasure Messagerecipient ModuleMigrationhistory Database tables and fields Module Mplsadmingroup MplsadmingroupinterfacerelationMplslsp Moduleslotpresent Mplspathhop MplspathMplsrsvplsp Mplsrsvplspadmingroup MplsrsvplspadmingroupcontainerDatabase tables and fields Mplsrsvplsp Mplsrsvplspactuallyroutedhop Mplsrsvplspfrrparameters Mplsrsvplspparameters Mplsservice Database tables and fields MplsrsvplspparametersMplsrsvplsppath Mplsrsvplsptunnelresource Mplsservicedevicerelation Database tables and fields MplsserviceMplsserviceendpointrelation Database tables and fields Mplsserviceendpointrelation MplsservicepeerrelationMrpring Mrpringdevice Database tables and fields Mrpringdevice N2FPORTMAP NetworkvlanNetworkscopetype Nicprofile Database tables and fields Nportwwnmap Npflowdefinition Npsubflow Database tables and fields NpflowdefinitionOuiguesseddevicemap Passwordhistory PbrinterfaceconfigOuivendor Perfcollector Pbrpolicy PbrrulePbrnexthop Pbrruleacllist Phantomport Database tables and fields PbrruleacllistPhysicaldevice Database tables and fields Physicaldevice Physicalinterface Pmcollectormeasuresetting PmcollectortargetsettingDatabase tables and fields Physicalinterface Physicalport Pmcollectortimeseriesmapping Database tables and fields PmcollectortargetsettingPmdashboardwidget Database tables and fields Pmdashboardwidget Pmdatacollector Database tables and fields Pmdatacollector PmmeasurePmstatsagingpolicy Pmwidgetmeasuretype PmwidgetmeasuretypeentryPmwidgetmonitortype Pmwidgettargetentry Database tables and fields Pmwidgettimeseriesentry PmwidgettopncollectorentryPmwidgetuserentry Poethreshold Database tables and fields Poethreshold PoethresholdeventPolicyrule Policyrulemap Portbottleneckstatus PortbottleneckconfigPortcommissioncimomserver Portfencingpolicy Database tables and fields PortcommissioncimomserverPortfencingpolicymap Portprofile Database tables and fields PortfencingpolicymapPortprofiledomain Portprofiledomainmap PortprofileinterfacemapPortprofilemacmap Portprofileqosmap Portprofileqospfcmap Portprofilevlanmap Portvlan Database tables and fields Portvlan PrivilegeProductapp Protocolvlan QrtzblobtriggersQrtzcalendars Qrtzcrontriggers Qrtzlocks QrtzjobdetailsQrtzjoblisteners Qrtzpausedtriggergrps Database tables and fields Qrtzschedulerstate QrtzsimpletriggersQrtzjtriggerlisteners Qrtztriggers Recoverycardgroupmapping RaslogQuerybaseddevicegroup Quorumcardgroupmapping Reporttype ReporttemplateReportdrilldowntemplate Resourcefabricmap Role ResourcehostmapRoleprivilegemap Ruleblockmap Rulelogicalexpressionmap SANSanconnection Database tables and fields Sanconnection ScomhostSecuritypolicy Sensor SelectedflyoverpropertySensorid Currentreading Sflowcheckpoint Sflowhoursummary Inpriority OutprioritySrcmac L3SRCADDR Sflowiprouteinfo Sflowminutebgp Database tables and fields Sflowminutebgp SflowminutebgpslnumSFLOWMINUTEL3SLNUM Sflowminutemac Database tables and fields Sflowminutemac SflowminutemacslnumSflowminutesummary Sflowminutevlan Database tables and fields Sflowminutevlan SflowminutevlanslnumSFLOWREPORTL3SOURCE SFLOWREPORTL4SOURCE Database tables and fields Sflowstaging Smartcard Sflowstagingslnum Database tables and fields Smartcard SmiasannameSnapshotproductstatus Snmpcredentials Snmpdata Database tables and fields Snmpcredentials Database tables and fields Snmpdata SNMPDATA1DAYSNMPDATA2HOUR Mibindex Snmpexprdata SNMPDATA30MINSNMPEXPRDATA1DAY Database tables and fields SNMPEXPRDATA1DAY SNMPEXPRDATA30MINSnmpexpression Snmpprofile Readcommunitystring Database tables and fields SnmpprofileWritecommunitystring Snmptrapcredential SNMPV3FORWARDINGCREDENTIALSourceobjecttype Sslcertificate Database tables and fields Sslcertificate SslkeySslcertificatevipservermap Sslkeypassword Database tables and fields SslkeyStatsaging Stpport Stpinstance Stpport Database tables and fields Stpinstance Switchbottleneckconfig Switchconfig SwitchconfigdetailSwitchlicense Field Switchmodel Switchport Database tables and fields Switchport Npivenabled FcfastwriteenabledIslrrdyenabled Qosenabled Defaultareaid EportdisabledLogicalportnumber Logicalportwwn Switchportperformance Database tables and fields Switchportperformance Switchthresholdsetting SystemcardenginemappingSystemproperty Targettype Thresholdmeasure ThresholdpolicyTimeseriesdata TIMESERIESDATA1DAY TIMESERIESDATA2HOUR Database tables and fields TIMESERIESDATA1DAYTABLE\399 TIMESERIESDATA30MIN TIMESERIESDATA11DAY TIMESERIESDATA1Sumvalue Database tables and fields TIMESERIESDATA11DAY TIMESERIESDATA12HOURTIMESERIESDATA130MIN Minvalue Database tables and fields TIMESERIESDATA130MIN TIMESERIESDATA2 TIMESERIESDATA21DAY TIMESERIESDATA22HOUR TIMESERIESDATA230MIN Database tables and fields TIMESERIESDATA22HOURTIMESERIESDATA3 TIMESERIESDATA31DAY Database tables and fields TIMESERIESDATA3TIMESERIESDATA32HOUR Database tables and fields TIMESERIESDATA32HOUR TIMESERIESDATA330MIN TIMESERIESDATA4 TIMESERIESDATA41DAY TIMESERIESDATA42HOUR TIMESERIESDATA430MIN Toolapp ToolpathTrill Database tables and fields TIMESERIESDATA430MIN Trilltrunkmember TrilltrunkgroupTrunkgroupinterface User Trunkgroupmember Database tables and fields User UseraormapUserdefineddevicedetail Userdefinednetworkscope Userrealtimemeasuresetting ContentUserpreference Userrealtimemeasuremapping Userresourcemap UserrolemapUserstatemap Vportdetail Vcnmember Vcnpeer Vcsclustermember VcnpeerVcemprofile Database tables and fields Vcemprofile VipserverVipserverbinding Virtualcircuitinterface Virtualfcoeportmacmember VirtualfcoeportVirtualfcoeportstat Database tables and fields Virtualfcoeportstat Virtualportwwndetails Virtualswitch Database tables and fields Virtualportwwndetails Database tables and fields Virtualswitch Fcoeloginenabled InsistentdidmodeDOMAINMODE239 Domainidoffset Hifenabled MapsenabledactionsCLUSTER1 Vcsid Monitored Vlan Vlaninterfacemember VlaninterfacerelationVlanintctagrelation Vlanintmacgrouprelation Vllendpointrelation Vmotionevent Database tables and fields Vmotionevent VmotionpnicdetailsVmdatacenter Vmdatastoredetails Vmdvport Database tables and fields Vmdvport Vmdvportgroup Vmdvswitch Database tables and fields Vmdvportgroup Vmdvswitchhostmember Database tables and fields VmdvswitchVmfchba Database tables and fields Vmfchba VmhostVmfchbadeviceportmap Database tables and fields Vmhost VmhostproxyswitchVmhostenddevconnectivity Vmhostproxyswitchpnicspec Database tables and fields VmhostproxyswitchVmhostvirtualnic Database tables and fields Vmhostvirtualnic VmnetworksettingsVmnicteamingpolicy Vmpath Database tables and fields Vmnicteamingpolicy Vmphysicalnic Database tables and fields Vmphysicalnic Vmsecuritypolicy Vmstandardvswitchport VmstandardvirtualswitchVmstdvswitchportgroup Database tables and fields Vmstdvswitchportgroup Vmstorage Vmstoragehbaremoteportmap VmvcenterVmtrafficshapingpolicy Vmvcentermember Database tables and fields VmvcenterVmvirtualethernetadapter Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Database tables and fields Vmvirtualmachine VmvirtualmachinedatastoremapVplsdevicerelation Vplsendpointrelation Vrconndomaingroup VrconndomainVrconnfcconnection Vrconnmodule Vrconnmoduleport Vrconnserverprofile WirelessproductdetailsVrconnwwn Wtarchive WirelessproductrelationZone Zonealias ZonealiasinzoneZonealiasmember Zonedb Zonedbconfig ZonedbcontentZonedbusers ZONEIN-ZONESET Adapterportconfiginfo ViewsAgconnectioninfo Views Cnaethportconfiginfo BootimagefiledetailsinfoCnaportdetailsinfo Cnaportinfo CNAETHPORT.MTU CNAPORT.ALARMWARNINGCNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS Coreswitchdetailsinfo CORESWITCH.ID CORESWITCHDETAILS.DESCRIPTION Coreswitch Left Outer Join CoreswitchdetailsCryptohostluninfo Cryptolun LUN, Cryptohost CRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, Cryptoswitch CryptotargetengineinfoDashboardpreferencesinfo DASHBOARD.CREATEDBY Deploymentinfo DeploymentconfigurationDeploymentlog Deviceconnectioninfo EEMONITORSTATS5MININFO EEMONITORSTATS30MININFOEEMONITORSTATS2HOURINFO EEMONITORSTATS1DAYINFO TEPORTSTATS5MININFO TEPORTSTATS30MININFO TEPORTSTATS2HOURINFO TEPORTSTATS1DAYINFO CORESWITCH.IPADDRESS SwitchinfoCORESWITCH.MAXVIRTUALSWITCHES VIRTUALSWITCH.CORESWITCHID = CORESWITCH.ID CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, FabricDeviceinfo DEVICEPORT.NUMBER DEVICEPORT.PORTID DEVICENODE.SIMULATEDDEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS DEVICENODE.FABRICID = SWITCHINFO.FABRICID N2FPORTMAP Switchport Agnport Switchport AgfportN2FPORTMAPINFO Devicenodeinfo Deviceportinfo Devicenode Devportgigeportlinkinfo DEVICENODE.FDMIHOSTNAMEDeviceport DEVICEPORTGIGEPORTLINK.DIRECTATTACH Islconnectioninfo DevportmacaddrmapinfoIslinfo ISL.DESTPORTNUMBER DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.ID EthernetislinfoEventdetailsinfo FABRIC.ID = ISL.FABRICID Eventinfo Fabricinfo FABRICMEMBER.FABRICID = FABRIC.ID FciptunnelcircuitinfoFCIPTUNNELCIRCUIT.DSCPDATA Fciptunnelcircuit FciptunnelinfoFCIPTUNNEL.DSCPCONTROL Fcoedeviceinfo Fruinfo Gigeportecloudlinkinfo Gigeport Switchport Coreswitch HBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATEGigeportinfo Hbaportdetailsinfo HBAPORTDETAIL.PREBOOTDISABLED HBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOS Hbatargetinfo HbaportHBATARGET.DEVICEPORTID HBATARGET.TRUSTED Healthstatusinfo HBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTIDHBAREMOTEPORT.CURRENTSPEED HBAREMOTEPORT.IOLATENCYAVERAGE Hostdiscoveryrequestinfo HOSTDISCOVERYREQUEST.IDHOSTDISCOVERYOPTION.VMPORT DEVICEENCLOSURE.TYPE Hostdiscoveryrequest IflinfoHOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID Isltrillinfo Isltrunkgroupmemberinfo ISL.DESTDOMAINID ISL.DESTPORTNUMBERDESTDEVICE.MANAGEDELEMENTID AS Destmeid ISL Device Vcsdevice Isltrunkinfo ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHID L2NEIGHBORINFOMapseventdetailsinfo L2NEIGHBOR Moduleinfo TEMPMODULE.MODULEID TEMPMODULE.NUMPORTS Nportwwnmapinfo MODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENTPHYSICALDEVICE.DEVICEID FOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUM Phantomportinfo Productinfo TEMPDEVICE.FABRICWATCHSTATUS TEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESSTEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLB Lastseentimestamp TEMPDEVICE.FIRSTSEENTIME TOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS as Portbottleneckstatinfo PortbottleneckconfinfoPortgroupinfo Roleprivilegeinfo Portprofileinfo Portprofileinterfaceinfo PortprofilemacinfoPORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODE Portprofile Protocolvlaninfo PortvlaninfoSflow Sflowminutemacview SFLOWMINUTEL3VIEWScomeemonitorinfo Eemonitor SensorinfoSOURCEPORT.ID = EEMONITOR.SOURCEPORTID Smartcardusageinfo Switchconfiginfo SwitchdetailsinfoSWITCHCONFIG, Switchconfigdetail SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGID VIRTUALSWITCH.FMSMODE VIRTUALSWITCH.MANAGEDELEMENTID CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, Coreswitchdetails Switchdiscoveredmacinfo SwitchportinfoSWITCHPORT.ID DEVICE.IPADDRESS, DEVICE.DEVICEID CORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo Timeseriesdataview TIMESERIESDATA12HOUR.MEASUREID From timeseriesdatainfo tsd Union ALL Trillinfo Userroleresourceinfo TrilltrunkinfoVirtualfcoeportinfo CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.ID VIRTUALPORTWWNDETAILS.SWITCHIDVirtualportwwndetailsinfo Virtualportwwndetails Vmaddressinfo VlanintclassifierinfoDEVICE.DEVICEID VLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBID Vmconnectivityinfo MACGROUP.IDDEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.ID INTERFACE.DEVICEID = DEVICE.DEVICEID VMPATH.HBAPORT = DEVICEPORT.WWN DEVICEENCLOSURE.ID AS Hostdbid Vmnetworkconnectivityinfo VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHID PnicmacVMHOSTENDDEVCONNECTIVITY.INTERFACEID DEVICE.MANAGEDELEMENTID Switchname VMHOST.DEVICEENCLOSUREID Vmdatastoredetailsinfo VmeemonitorinfoVmpath Vmvirtualmachine VMPATH.HBAPORTBPCHAR = SOURCEPORT.WWN Vmhostinfo Vmluninfo Vmstatisticsinfo SWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOK SWITCHPORT.PORTID SWITCHPORT.PORTNUMBERVMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN Vrconnmoduleinfo VRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINIDVRCONNDOMAIN.FIRMWAREVERSION VCEMPROFILE.DISCOVERYSTATUS Union Select distinct VRCONNMODULE.ID Vrconnmoduleportinfo Vrconnnpivinfo DEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAME VmmdiscoveredmacinfoUSERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS Vmvirtualethernetadapterinfo ZONEDB.ID = ZONEDBCONFIG.ZONEDBID ZonedbinfoApusage Events Sflowminutevlanview SflowminutebgpviewPhysicaldeviceinfo Managedelementinfo SlotinfoSnmpdatainfo Snmpexprdatainfo Snmpdataview Where sw.id = sp.virtualswitchid = de.managedelementid Vmvnetworkinfo Device PHYSICALINTERFACE, Physicalport Vcsclustermemberinfo $BODY$ ResetvcslicensedTrilltrunkgroup Wirelessinterface Select Wiredinterface Ceeportinfo L3.SUBNETMASKDeviceipaddress CEEPORT.AMPPPROFILEMODE CEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Index Access levels definedAmpp EMC, 354 HP LAN, 355 IBM CNA CUP, Ficon Hosts, 101 1692 53-1003056-01 FTP FiconGslb State, 102 Monitor Mstp New device, adding name NOSColumns, 284 product overview, 453 products Rbac 1043 SVI 1699 Edit, 880 WWN 1701