3qosp3time-exceeded | Brocade Communications Systems IP250 specs

Layer 3 access control list policy

18

b.Choose one of the following code types:

The available code types vary depending on the selected message type.T

echo		timestamp-reply
•	echo	•	timestamp-reply
echo-reply		timestamp-request
•	echo-reply	•	timestamp-request
information-request		unreachable
•	information-request	•	net-unreachable
mask-reply		•	host-unreachable
•	mask-reply	•	protocol-unreachable
mask-request		•	port-unreachable
•	mask-request	•	packet-too-big
parameter-problem		•	source-route-failed
•	parameter-problem	•	destination-network-unknown
•	general-parameter-problem	•	destination-host-unknown
redirect		•	source-host-isolated
•	net-redirect	•	destination-net-prohibited
•	host-redirect	•	destination-host-prohibited
•	net-tos-redirect	•	net-tos-unreachable
•	host-tos-redirect	•	host-tos-unreachable
source-quench		•	administratively-prohibited
•	source-quench	•	host-precedence-violation

•precedence-cutoff

•ttl-exceeded

•reassembly-timeout

9.(IPv4 ACL only) Select one of the following options to match packets to a hardware forwarding queue from the Priority list.

•0:qosp0

•1:qosp1

•2:qosp2

•3:qosp3time-exceeded

This changes the internal forwarding priority of the packet. If the outgoing interface is an 802.1Q interface, the specified priority is mapped to the equivalent 802.1p (CoS) priority and the packet is marked with the new 802.1p priority.

10.(IPv4 ACL only) Select the hardware forwarding queue to which you want to assign outgoing packets from the Priority Force list.

11.(IPv4 ACL only) Select a priority map to filter packets based on their 802.1p value from the Priority Map list.

Selecting a priority map does not change the forwarding priority of the packet or mark the packet with a new priority.

12.(IPv4 ACL only) Enter a Differentiated Services Code Points (DSCP) marking value to mark packets with a specified TOS value in the DSCP-Marking(0-63)field.

13.Enter a DSCP mapping value to maps a DSCP value to an internal forwarding priority in the (IPv4 ACL only) DSCP-Mapping(0-63)field.

Brocade Network Advisor IP User Manual	601
53-1003056-01

Image 653

Brocade Communications Systems IP250 user manual 3qosp3time-exceeded

Contents

Brocade Network Advisor Title Publication number Summary of changes Date Brocade Communications Systems, Incorporated Title Publication number Summary of changes Date 53-1003056-01 Contents Chapter Discovery Installing a patch Uninstalling a patch Vii Management groups overview Configurable preferencesDisplaying Network Object view 111 Users overview Viewing configured users181 182 Setting the dashboard display Accessing a dashboardDashboard overview Dashboard toolbar 53-1003056-01 IP main toolbar IP tab overviewProduct List toolbar Host Product List toolbar Call Home overview Viewing Call Home configurationsSystem requirements 344 Starting third-party tools from the application About third-party toolsLaunching a Telnet session Launching an Telnet session from the IP tab Wireless devices Wireless management overviewServer Management Console overview Launching the SMC on Windows Logical chassis cluster mode discovery VCS mode typesVCS Ethernet Fabrics view management Brocade adapters Host managementHost Bus Adapters Converged Network Adapters 481 This chapter Telemetry overview Adding policies from saved configurationsPolicy-based routing Viewing existing PBR policies IronWare Layer 2 ACL configuration Layer 2 access control list managementFabric OS Layer 2 ACL configuration Creating a Layer 2 ACL from a saved configuration Zoning overview Scheduling a security configuration deploymentOnline zoning Offline zoning 671 Chapter Port Fencing 723 Chapter IP Element Manager 765 743 777 CLI configuration overview778 807 Remote Switched Port Analyzer Default VlanConfiguration requirements for Vlan Manager Adding or modifying dual mode ports 843 Mpls pre-configuration 917 VIP Servers overviewVIP Server functions Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management Chapter Technical Support This chapter 1213 Configuring packet captures Reports Link incident events Dashboard main menus 1261 IP main menus IP shortcut menusProduct status events 1277 1371 This appendixDatabase tables and fields Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo How this document is organized About This DocumentThis chapter Xliv 53-1003056-01 Fabric OS hardware and software support Supported hardware and software IronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Text formatting Document conventionsKey terms Bold text Brocade resources Additional informationOther industry resources These references are made for informational purposes only Document feedback Getting technical help User interface components Getting Started Management server and client Management server and client Logging into a server Clearing previous versions of the remote client Launching a remote client Launching the Configuration Wizard 53-1003056-01 53-1003056-01 Active Sessions dialog box displays Figure Viewing active sessionsSelect Server Active Sessions Viewing server properties Disconnecting usersTo disconnect a user, complete the following steps Select Server Server Properties Management server and client Server Properties Viewing port statusClick Close to close the Server Properties dialog box Field/Component Description Server and client ports Tftp UDP TCP 4431,2 Https server Json Accessibility features for the Management application Accessibility features for the Management applicationKeyboard shortcuts Menu Item or Function Keyboard Shortcut Look and feel customization Setting the look and feelSelect Server Options Options dialog box displays Changing the font size Connecting to the database using pgAdminPostgreSQL database Selecting File Add Server PostgreSQL database Click the System DSN tab Click Add Odbc Data Source Administrator dialog box displaysLinux version RedHat Package Manager file Suse On the Setup psqlODBC screen click Next Installing the Odbc driver on Linux systemsAdding the Datasourse on Linux systems Save and close the odbcinst.ini file Executing SQL queries from the CLI Testing the connection on Linux systemsOn the Select database screen, complete the following steps Select the Connect to an existing database option Open Source Software License Type Changing the database user passwordSupported open source software products HP Software Development KIT License Agreement Lgpl BSD Ireasoning Open Source Software License Type Supported open source software products Execute the patch file for your operating system Installing a patchPatches Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview 53-1003056-01 Discovery of IPv6 addresses Configuration requirementsMIB support Ietf standard MIB name Required MIB object Data collected BRIDGE-MIB MIB-IIIF-MIB Ietf standard MIB name Required MIB object Data collected IP-MIB VDX/VCS discoveryENTITY-MIB VCS in-band management interface discovery Network OS discovery IP address formatMapping VCS in-band management 1000000533516242 VCS fabric discovery Standalone discoveryVCS fabric rediscovery Select File Save Network OS 2.0 device limitations Seed switch failoverVCS fabric split and merge Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change Discover Setup IP dialog box displays Configuring IP profile discoveryHyperEdge stack discovery HyperEdge stack discovery Click the Global Settings tab Configuring IP profile discovery Configuring IP simple discovery Configuring IP simple discoveryIP Snmp credentials Adding SNMPv1 and SNMPv2c credentials Click the Snmp tab IP Snmp credentials CBC-DES Adding SNMPv3 credentialsHMACMD5 Hmacsha Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Deleting Snmp credentials from the list Reordering Snmp credentials in the list Adding user credentials Default IP user credentials Default IP user credentials 53-1003056-01 Editing enable prompt user credentials Editing login prompt user credentials To edit an enable super user, complete the following steps Editing enable super user credentials Deleting user credentials from the list Reordering user credentials in the list Including product types IP Object identifier filtersIP Object identifier filters Click the OID Filter tab Product sysObjectID Vendor Excluding product types Defining global setting preferences Defining global setting preferencesDeleting product types from the list Click the Preferences tab 53-1003056-01 Reduce the managed count by completing the following steps Configuring event-based collection 53-1003056-01 IP discovery profiles Configuring a discovery profileIP discovery profiles Duplicating a discovery profile Configuring address ranges Select Cidr Subnet from the Entry Type list Adding Cidr subnet addresses Adding IP addresses Adding subnet addresses Excluding subnet addresses Excluding Cidr subnet addresses Excluding IP addresses Editing address ranges Editing IP addresses Editing Cidr subnet addressesEditing subnet addresses Scheduling discovery Configuring an hourly discovery schedule Configuring a one-time discovery schedule Configuring a weekly discovery schedule Configuring a daily discovery schedule Configuring a yearly discovery schedule Configuring a monthly discovery schedule To edit a discovery schedule, complete the following steps Suspending a discovery scheduleEditing a discovery schedule Editing an hourly discovery schedule Editing a one-time discovery scheduleEditing a daily discovery schedule Editing a weekly discovery schedule Editing a yearly discovery schedule Configuring advanced discovery profile preferencesEditing a monthly discovery schedule IP discovery profiles Starting discovery manually Deleting a discovery profileCreating a discovery address file Stopping discovery Starting discovery automaticallyViewing discovery status To view discovery status, complete the following steps Mailing discovery reports Viewing discovery reports Click Discovery Log Exporting discovery reportsViewing the discovery log Individual IP device discovery Individual IP device discoveryAdding an IP device to discovery HMACMD5 Click the SNMPv1/v2c Read/Write tab Click the SNMPv3 Read Only tab Click the Read/Write Credentials tab Editing IP device discoveryClick the SNMPv1/v2c Read Only tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Deleting IP devices from discovery Host discoveryDiscovering Hosts by Network address or host name Select Discover Host Adapters Host discovery Click Close on the Discover Host Adapters dialog box Importing Hosts from a CSV file Host discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery To edit Host credentials, complete the following steps Editing Host adapter credentials Rediscovering a previously discovered fabric Removing a host from active discoveryDeleting a host adapter from discovery Click Discover IconDescription Troubleshooting host discoveryViewing the host discovery state VM Manager discovery requirements VM Manager discoveryDiscovering a VM manager Select Discover VM Managers VM Manager discovery Clear to disable vSphere client plug-in registration To edit VM manager discovery, complete the following steps Editing a VM managerClick Close on the Discover VM Managers dialog box Including a host in VM manager discovery Excluding a host from VM manager discoveryRemoving a VM manager from active discovery Rediscovering a previously discovered VM manager Viewing the VM manager discovery state Deleting a VM manager from discovery Rediscovering IP devices Troubleshooting VM manager discoveryIP Rediscovery Click Rediscover Rediscovering IP devices from the Product List Rediscovering a group Enabling password validation on rediscovery Displaying Network Object view Management GroupsManagement groups overview Product group overview Creating a static product group Static product groups Product group overview Editing a static product group Duplicating a static product group Creating a dynamic product group Dynamic product groups Userdefinedproperty1 up to Select Value or Regular Expression from the Type list Duplicating a dynamic product group Editing a dynamic product group Product Group Properties dialog box displays Viewing product group propertiesViewing test results Properties tab Click OK to close the dialog boxProducts tab Performance list Deleting a product group Port GroupsCreating a port group Port Groups Editing a port group Duplicating a port group Ports tab Viewing port group properties Deleting a port group Configurable preferences Application Configuration Server Data backup Management server backup What is backed up?Configuring backup Select Server Backup in the Category list 130 53-1003056-01 Enabling backup Viewing the backup status Disabling backupChanging the backup interval Clear the Enable Backup check box Click Apply or OK Select Server Backup in the Category list Click Backup Now Starting immediate backupReviewing backup events Restoring data Server Data restore Restoring data to a new server SAN data collection 136 53-1003056-01 Snmp Product communication protocolsIcmp FTP Netconf Configuring event storage Event storage settingsEvent storage settings Product communication protocols To configure event storage, complete the following steps Configuring flyovers Flyover settingsStoring historical events purged from repository Select Event Storage in the Category list Options dialog box Flyovers pane, Connection tab Properties table Viewing flyovers Name settingsTurning flyovers on or off Click Fix Duplicates Select Configure NamesFixing duplicate names Viewing names Name settings Select one of the following optionsConfigure Names dialog box displays Figure Adding a name to an existing device Click Apply Names Adding a name to a new deviceApplying a name to a detached WWN Editing names Removing a name from a deviceExporting names Click Export Searching for a device by name Importing NamesTo import names, complete the following steps Click Import Searching for a device by WWN Miscellaneous security settings Select Security Misc in the Category list Configuring the server nameConfiguring login security Configuring the login banner display Syslog Registration settingsDisabling the login banner Registering a server as a Syslog recipient automatically Registering a server as a Snmp trap recipient automatically Snmp Trap Registration settingsConfiguring the Syslog listing port number Configuring the Snmp trap listing port number Snmp Trap forwarding credential settingsConfiguring Snmp v1 and v2c credentials Snmp Trap forwarding credential settings Configuring Snmp v3 credentials Client/Server IP Software ConfigurationConfiguring the server IP address 156 53-1003056-01 Configuring an explicit server IP address Click OK on the Login Banner Configuring the application to use dual network cards IP preferences Software ConfigurationYou can configure the following preferences for IP products Configuring change manager preferences Configuring deployment report preferences Configuring custom report preferencesConfiguring deployment preferences Configuring image repository preferences Configuring IP device manager preferencesConfiguring Mpls management preferences Configuring Mpls polling service preferences Configuring polling service preferences Configuring name service preferencesConfiguring sFlow accounting preferences Configuring sFlow data collector preferences Configuring SSL certificates preferences Configuring sFlow monitoring preferences Configuring Tftp preferences Configuring Snmp preferencesConfiguring syslog file reader preferences Configuring memory allocation settings Memory allocation settings Server Heap Size Configuring asset polling Viewing the network size status Product communication settingsConfiguring SAN communication Select the Connect using Https Http over SSL only option Configuring the preferred IP formatSelect the Connect using Http option Configuring IP communication Http FTP/SCP/SFTP server settings Configuring an internal FTP server Accessing the FTP server folder Configuring an internal SCP or Sftp server Select the Use External FTP Server and/or SCP Server option Configuring an external FTP, SCP, or Sftp server Select SCP from the Preferred Protocol Secured list Testing the FTP, SCP, and Sftp serverSelect Sftp from the Preferred Protocol Secured list Select FTP/SCP/SFTP in the Category list To configure server settings, complete the following steps Server port settingsConfiguring the server port Configuring support mode settings Support mode settingsSelect Support Mode in the Category list Options dialog box displays Figure Configuring the server log file purge limit Fips Support Users overview User Account Management To view configured users, complete the following steps Viewing configured usersSelect Server Users Users dialog box displays Click the Users tab, if necessary 183 184 53-1003056-01 Creating a new user account User accountsUser accounts To create a new user account, complete the following steps 186 53-1003056-01 Copying a user account Editing a user account Copying and pasting user preferences Disabling a user account Deleting a user account Enabling a user accountUnlocking a user account To re-activate a user account, complete the following steps Creating a new role RolesRoles To create a new role, complete the following steps Copying a role Editing a role To delete a role, complete the following steps Deleting a roleAdding privileges to a role Areas of responsibility Areas of responsibilityRemoving privileges from a role Creating an AOR Copying an AOR Editing an AOR Assigning products to an AOR Deleting an AOR Configuring a password policy Password policiesRemoving products from an AOR Users dialog box displays Click the Policy tab 199 Viewing password policy violators Click the Authentication Server Groups tab Authentication Server Groups on the Management serverAssigning roles and AORs to an AD group Click View Policy Violators To load an AD group, complete the following steps Removing roles and AORs from an AD groupLoading an AD group Creating an AD user account Deleting an AD groupOpen the Active Directory Users and Computers console Close the Active Directory Users and Computers dialog box Defining user accounts on the external Ldap server Configuring roles and AORs on the external Ldap serverAssigning an AD user to an AD group Select Start Run Type adsiedit.msc and press Enter User profilesClick OK Close the Management console Viewing your user profile User profiles Configure CLI credentialsSelect Server User Profile Click OK on the User Profile dialog box Editing your user profile Changing your passwordUser profiles To edit your user profile, complete the following steps To view your password policy, complete the following steps Viewing your password policy Configuring e-mail notification Resetting optional messagesConfiguring CLI credentials Click Optional Messages Reset Configuring the CLI credential policy Dashboard overview Dashboard Management 212 53-1003056-01 Toolbar Dashboard toolbar Dashboards expand navigation bar Dashboard messages General dashboard functions Accessing a dashboard Creating a user-defined dashboard Filtering the dashboards list Customizing the dashboard widgets and monitors Setting the dashboard displayDeleting a user-defined dashboard 218 53-1003056-01 Attaching and detaching the Dashboard tab Exporting the dashboard displayPrinting the dashboard display Setting the network scope Creating a customized network scope Deleting a user-defined network scope Setting the data display time frameEditing a user-defined network scope IP Port Health Default dashboardsProduct Status and Traffic dashboard Status widgets Access Point Status widgetStatus widgets Color Type Customizing the Access Point Status widget ColorSeverity Events widget Customizing the Events widget Accessing additional data from the Events widget Customizing the Host Adapter Inventory widget Host Adapter Inventory widget IP Inventory widget Customizing the IP Inventory widget Accessing additional data from the IP Inventory widget IP Status widget IP Status widget displays the device status as a pie chart Viewing additional IP product data Accessing additional data from the IP Status widget Fabric Watch widgets Fabric Watch widgetsStatus widget Out of Range Violations widget Customizing the Out of Range Violations widget Port Health Violations widget Customizing the Port Health Violations widget Monitor title Description Data collectors Accessing additional data from the widgetPerformance monitors Click the Customize Dashboard icon Performance monitors Preconfigure performance monitorsDisplaying monitors on the Performance Dashboard Performance monitors Click OK Top Port Alignment Errors monitorAccessing additional data from top or bottom port monitors Performance monitors Top Port C3 Discards monitor Top Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Accessing additional data from the Top Port Discards monitor Top Port Encode Error Out monitor Top Port Errors monitor Top Port Errors monitor Accessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Receive EOF monitor Top Port Runtime Errors monitor Top Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Accessing additional data from the Top Port Traffic monitor Top Port Underflow Errors monitor Top Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor Measures User-defined performance monitorsMonitor types Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors Port measures types User-defined performance monitors Time series performance monitors Accessing additional data from the Distribution monitors Accessing additional data from the sFlow monitors Configuring a user-defined product performance monitorTop sFlows performance monitors Add Performance Dashboard Monitor dialog box displays 271 Click OK on the Add Performance Dashboard Monitor dialog box Adding targets to a user-defined performance monitor Performance Dashboard Monitor Targets dialog box displays Configuring a user-defined port performance monitor 274 53-1003056-01 MAC Vlan Configuring a user-defined sFlow performance monitor Viewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph Utilization Legend View Management IP tab overview Main toolbar IP main toolbar Product List toolbar Topology Map toolbar Host Product List toolbar IP Product List Host topology map toolbar Product List functions Topology Map 286 53-1003056-01 Keyboard Shortcut Description Master LogIP tab overview Topology keyboard shortcuts Anchoring or floating the Minimap Minimap Resizing the Minimap Status bar IP product icons Icon legend Icon legend Host product iconsVlan CNA IP port icons IP group iconsIP product status icons Event icons Zooming in and out of the Connectivity Map Customizing the main windowZooming Customizing the main window Customizing application tables Exporting the topologyZooming out Displaying columns Changing the order of columns Sorting table information Resizing the columnsCopying table information Exporting table information Adding a property label Product List customizationSearching for information in a table Expanding and collapsing tables Deleting a property label Editing a property label Searching for a device Search Restricting a search by node Searching for an exact match Address FinderClearing search results Address Finder Address Finder dialog box displays Finding IP addressesSelect Tools Address Finder 303 Finding MAC addresses 305 IP topology view manager Network Object view functions Network Objects view Network Objects view Filtering devices in the Network Objects Product ListClearing the Network Objects Product List filter IP Topology view IP Topology viewL2 Topology view Vlan Topology view Ethernet Fabrics viewSTP/RSTP topology Ethernet Fabrics view ElementDescription Viewing STP/RSTP topology Exporting an STP/RSTP Report Generating an STP/RSTP ReportVlan Topology view STP/RSTP Topology map elements Element Description Host Topology view Click Save Host Topology viewMailing an STP/RSTP Report 314 53-1003056-01 IP topology map components IP topology map componentsTopology map elements Connections Icon Description ProductsLogical Topology map layout Viewing flyovers on the topology map Orthogonal Organic Hierarchical Orthogonal Merge Lines Free Form Selecting a topology map layoutCircular Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Click OK on the Topology Background Map dialog box Deleting a background image from the library Select Portrait or Landscape from the Orientation area Printing a map Enabling port actions Port actions Port actions Disabling port actionsDisplaying port properties for an attached device Accessing performance monitoring 330 53-1003056-01 MRP Topology overview MRP Topology Viewing a MRP Topology map Master Viewing a MRP ring Viewing a MRP ring MRP Topology map elements Error Selecting a topology map layout Configuring the application to show a dashed line 336 53-1003056-01 337 Creating a customized layout Enter the ring ID, for example, Ring Customizing the MRP Topology mapClick the Starting Point row Click Close on the MRP Topology Options dialog box Refreshing MRP Topology dataViewing MRP properties 341 Viewing MRP properties Call Home Call Home System requirements Viewing Call Home configurations 346 347 Hiding a Call Home center Showing a Call Home centerShowing a Call Home center To show a Call Home center, complete the following steps Click Edit Centers beneath the Call Home Centers list Editing a Call Home centerEditing the IBM Call Home center Editing an e-mail Call Home center Backup Connection fieldPrimary Connection field Click Edit Centers beneath the Call Home Centers table Enter a password in the Smtp Server Settings Password field Enter a user name in the Smtp Server Settings Username field Call Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center Enabling supportSave To enable a Call Home center, complete the following stepsEnabling a Call Home center Testing the Call Home center connection Testing the Call Home center connectionDisabling a Call Home center Select Monitor Event Notification Call Home Viewing Call Home status Viewing Call Home status Removing a device from a Call Home center Assigning a device to the Call Home centerRemoving all devices and filters from a Call Home center Assigning a device to the Call Home center Click OK on the Call Home Event Filter dialog box Defining an event filterTo define an event filter, complete the following steps Assigning an event filter to a Call Home center Assigning an event filter to a Call Home centerAssigning an event filter to a device Overwriting an assigned event filter Overwriting an assigned event filterRemoving all event filter from a Call Home center Removing an event filter from a device Removing an event filter from a deviceSearching for an assigned event filter Searching for an assigned event filter Starting third-party tools from the application Third-party toolsAbout third-party tools Launching an Element Manager Launching a Telnet sessionLaunching an Telnet session from the IP tab Select Tools Product Menu ToolName Select Tools Setup Select Configure Element Manager HCM. HCM Agent displaysLaunching HCM Agent Adding a tool Entering the server IP address of a tool Adding an option to the Tools menu Removing an option from the Tools menu Changing an option on the Tools menu Adding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Launching the SMC on Windows Server Management ConsoleServer Management Console overview Monitoring and managing Management application services Services tabServices tab Launching the SMC on Linux Stopping the Cimom services Stopping all servicesRefreshing the server status Click Stop Cimom Restarting all services Starting all servicesChanging the database password Click Change Database Password Viewing server port numbers Ports tab Configuring Radius server authentication AAA Settings tabAAA Settings tab Select Radius Server from the Primary Authentication list Local Database Configuring a Radius server Configuring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server For Primary Authentication, select TACACS+ Server Configuring TACACS+ server authentication Configuring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list For Primary Authentication, select Switch Configuring switch authentication For Primary Authentication, select Windows Domain Configuring Windows authentication Displaying the client authentication audit trail Configuring local database authenticationFor Primary Authentication, select Local Database Authentication Audit Trail log displays Technical Support Information tab Restore tabRestoring the database Capturing technical support information Upgrading HCM on the Management server HCM Upgrade tabTo upgrade HCM, complete the following steps SMI Agent Configuration Tool Select the HCM Upgrade tab SMI Agent Configuration Tool Management Console dialog box Launching the Smia configuration tool on WindowsSMI Agent Configuration Tool Smia Configuration Tool dialog box Launching the Smia configuration tool on Unix Smia Configuration Tool dialog box displays Launching a remote Smia configuration toolService Location Protocol SLP support Slptool commands SLP file locations on Unix systems SLP on Unix systems SLP file locations on Windows systems SLP on Windows systems Home tab Authentication tab Authentication tab Click the Authentication tab Configuring Cimom server authentication Cimom tab Configuring the SMI Agent port number Configuring the Cimom Bind Network Address Configuring the Cimom log Click the Certificate Management tab Certificate Management tabTo import a certificate, complete the following steps Exporting a certificate Viewing a certificate Deleting a certificate Summary tab SMI Agent Configuration Tool Click the Summary tab Licensed Ports Log LevelManaged Ports 412 53-1003056-01 Wireless management overview Wireless Management Device Name Firmware required Wireless devicesWireless device discovery Wireless devices on the dashboard Wireless devices on the dashboard View management Wireless device propertiesElement Manager View management Launching the Element Manager Browser and system requirements Launching a Telnet session Configuration repository and backup management Save and close the file CLI configuration management Vlan management Cluster mode Policy Monitors Fault managementPerformance management AP Products report Firmware version StatusLocation Contact 424 53-1003056-01 VCS VCS Management Fabric cluster mode VCS mode types Logical chassis cluster operations Logical chassis cluster mode discoveryEthernet Fabrics view management This section contains these topics 428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Network OS Support for Network OS VDX 2740 embedded switch Port profiles VCS product groupsStatic product group Dynamic product group Port profile Vlan profile QoS profile Ampp characteristicsLife of a port profile Ampp event Applicable behavior and failures Ampp events and behavior Assigning MAC addresses to a port profile Port profile configuration using the management application Related topics Managing offline MAC addressesClick Add Assign MACs dialog box displays Click Add Offline MACs Comparing port profiles Profile Comparison Summary dialog box Profile Properties Vlan SettingsProfile Comparison Summary list ACL Settings QoS SettingsFCoE Settings Deploying port profiles FRU monitoring System Monitor support on Network OS VDX platforms Resource monitoring System thresholdsAlert notifications Security monitoring SFP parameter monitoringPort statistics monitoring SFP parameter Description Suggested SFP impact Interface error types Ethernet fabric traceroute Select Monitor Diagnostics TracerouteTracing Ethernet fabric routes To diagnose traceroute, you can do either of the following Source address format Condition TCP UDP Request Source port number Destination port number Ethernet fabric traceroute Trace Route example Browse to the directory where you want to save the data Exporting diagnostic data 450 53-1003056-01 Host management Host Management Host Bus Adapters Brocade adaptersFollowing sections describe the three Brocade adapter types Model number Description Fabric Adapters Converged Network Adapters HCM software HCM softwareAnyIOTM technology HCM features VM Manager Host adapter discoveryAdding a VM Manager Click Add on the Discover VM Managers dialog box ESXi CIM listener ports HCM and Management application support on ESXi systemsDeleting a VM Manager Add Host Adapters dialog box Adding host adapter credentials for ESXi Adapter software Select Host Adapter Software from the Configure menuAdapter software Select CIM server ESXi only as the Contact option Importing a driver into the repository Driver repository Deleting a driver file from the repository Boot image repository Boot Image Management dialog box Importing a boot image into the repository Click Import on the Boot Image Repository dialog box Downloading a boot image to a selected host Configuring host adapter ports Bulk port configurationDeleting a boot image from the repository Backing up boot image files Bulk port configuration Adding a port configurationClick Add on the Configure Host Adapter Ports dialog box Add Port Configuration dialog box, shown in , displays 466 53-1003056-01 Adapter Port Configuration Status dialog box displays Editing a port configuration Configuring FAWWNs on switch portsDuplicating a port configuration Deleting a port configuration Disabling the Fawwn feature on a switch or AG ports Enabling the Fawwn feature on a switch or AG portsSelect Configure Fabric Assigned WWN. or Click Start to save the changes to the switch Modifying a Fawwn on a switch or AG port Auto-assigning a Fawwn to a switch or AG portManually assigning a Fawwn to a switch or AG port FAWWNs on attached AG ports Deleting a Fawwn from a switch or AG port Adding AG port FAWWNs Moving an AG port Fawwn across switchesDeleting AG port FAWWNs Click the Attached AG Ports tab Host adapter administrator privileges Role-based access controlRole-based access control Host adapter management privileges FC port measures HBA port measures CNA port measures Host performance management Host security authentication Counters Host security authentication Host security authentication Adapter events Host fault managementSupportSave on adapters Syslog forwarding Host fault managementFiltering event notifications Select the Include FTP Root directory check box Backup supportConfiguring backup to a hard drive Select the Enable Backup check box Click Apply or OK FCoE overview Fibre Channel over Ethernet Enhanced Ethernet features Enhanced Ethernet featuresDcbx protocol Enhanced Transmission Selection Ethernet jumbo frames FCoE protocols supportedEthernet link layer protocols supported FCoE protocols FCoE licensing Saving running configurationsCopying switch configurations to selected switches Saving running configurations Device type Configuration possibilities DCB configuration management Switch policies Switch policiesDCB map and Traffic Class map Lldp profiles DCB configuration DCB configurationMinimum DCB configuration for FCoE traffic Creating a DCB map to carry the LAN and SAN traffic Select Configure DCB To configure LLDP, complete the following steps Configuring Lldp To configure the DCB interface, complete the following steps Creating the FCoE Vlan to carry FCoE traffic Select Assign the Global ConfigurationSelect Configure Element Manager Admin Apply the Vlan classifier group to the DCB interface Save the running-config file to the startup-config fileAdding a LAG Add LAG or Edit LAG dialog box displays, as shown in Figure L2 Mode Select Access or TrunkClick Add LAG or Edit LAG Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG Deleting a LAG QoS configuration Creating a DCB map Strict priority No bandwidth % configuration AllowedOff Priority group ID 503 Deleting a DCB map Editing a DCB map Assigning a DCB map to a port or link aggregation group QoS configuration Select Traffic Class from the Map Type list Creating a Traffic Class mapEditing a Traffic Class map Deleting a Traffic Class map FCoE provisioning Changing the Vlan ID on the default FCoE mapFCoE provisioning Select Traffic Class in the Map Type list Enabling or disabling the FCoE map on the port Adding a Vlan classifier rule Vlan classifier configuration Vlan classifier configuration Deleting a Vlan classifier rule Editing a Vlan classifier rule Deleting a Vlan classifier group Creating a Vlan classifier group LLDP-DCBX configuration LLDP-DCBX configurationConfiguring Lldp for FCoE 515 Deleting an Lldp profile Editing an Lldp profile Assigning an Lldp profile to a port or ports in a LAG 802.1x authentication802.1x authentication Disabling 802.1x authentication Enabling 802.1x authenticationSetting 802.1x parameters for a port 16 802.1x authentication 519 Switch, port, and LAG deployment Switch, port, and LAG deploymentDeploying DCB product, port, and LAG configurations Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Supported VCS platforms Viewing switches in VCS modeNetwork OS switches in VCS mode Viewing FCoE parameters on the Network OS switch Viewing QoS parameters on the Network OS switch Available Rules Viewing LLDP-DCBX parameters on the Network OS switchVlan Classifiers Lldp Profiles list Viewing port parameters on the Network OS switch port Viewing ports in VCS modeViewing the 802.1x parameter on the Network OS switch QoS-DCB Viewing QoS parameters on the Network OS switch portQoS DCB parameters on the Network OS switch port QoS Non-DCB Viewing FCoE parameters on the Network OS switch portQoS non-DCB parameters on the Network OS switch port Viewing the 802.1x parameter on the Network OS switch port Viewing LLDP-DCBX parameters on the Network OS switch port Viewing LAG parameters on the Network OS switch LAG Viewing LAGs in VCS modeRe-authentication Interval sec Port Control QoS DCB parameters on the Network OS switch LAG Viewing QoS parameters on the Network OS switch LAGType Minimum Links QoS non-DCB parameters on the Network OS switch LAG Viewing FCoE parameters on the Network OS switch LAG Enable LLDP-DCBX check box Viewing LLDP-DCBX parameters on the Network OS switch LAG Real-time performance graph DCB performanceGenerating a real-time performance graph from the SAN tab DCB performance Generating a historical performance graph Historical performance graphGenerating a real-time performance graph from the IP tab Historical performance report FCoE login groupsGenerating a historical performance report Historical Performance Graph dialog box displays 539 FCoE login groups Adding an FCoE login group FCoE Login Group Confirmation and Status dialog displays Editing an FCoE login groupFCoE login groups Click OK Select a group from the Login Groups list and click Delete Deleting one or more FCoE login groupsDisabling the FCoE login management feature on a switch Enabling the FCoE login management feature on a switch Virtual FCoE port configurationVirtual FCoE port configuration Viewing virtual FCoE ports Virtual FCoE Ports tab displays, as shown in Figure Clearing a stale entrySelect the Virtual FCoE Ports tab 545 546 53-1003056-01 Policy-based routing TelemetryTelemetry overview Viewing existing PBR policies 549 Adding rules to a policy Adding a new policy 551 Editing a rule Adding policies from saved configurationsEditing a policy Deploying a PBR policy on demand Deleting a policy or rule Select Save deployment only Saving a PBR policy deploymentClick OK on the Deploy to Products PBR dialog box Scheduling a PBR policy deployment Configuring an hourly deployment schedule Configuring a one-time deployment schedule Configuring a monthly deployment schedule Configuring a daily deployment scheduleConfiguring a weekly deployment schedule Configure Security ACL Accounting Resetting ACL countersACL Accounting Enabling or disabling ACL accounting Select the Clear all counters on device check box Viewing ACL countersPort Selection Layer 2/3 ACL dialog box displays Click OK on the Port Selection Layer 2/3 ACL dialog box 560 53-1003056-01 Security overview Layer 2 access control list managementSecurity Management Add Layer 2 ACL Configuration dialog box displays IronWare Layer 2 ACL configurationCreating a Layer 2 ACL configuration IronWare MAC Click OK on the Add Layer 2 ACL Configuration dialog box Editing a Layer 2 ACL configuration IronWare Copying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Select the Clear ACL Assignment option Clearing Layer 2 ACL assignments IronWare DeviceName Layer 2 ACL Configuration dialog box displays Fabric OS Layer 2 ACL configurationCreating a standard Layer 2 ACL configuration Fabric OS Click OK on the Edit Layer 2 ACL Configuration dialog box Editing a standard Layer 2 ACL configuration Fabric OSCopying a standard Layer 2 ACL configuration Fabric OS Select Extended from the Type list Creating an extended Layer 2 ACL configuration Fabric OS 572 53-1003056-01 Copying an extended Layer 2 ACL configuration Fabric OS Editing an extended Layer 2 ACL configuration Fabric OS 574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Deleting a Layer 2 ACL configuration from the switch Creating a Layer 2 ACL from a saved configurationDeleting a Layer 2 ACL configuration from the application Viewing Layer 2 ACL configuration on a fabric Network OS Network OS Layer 2 ACL configuration Viewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Click OK on the Port Selection Layer 2 ACL dialog box Layer 3 access control list policy Creating a standard L3 ACL configuration Add L3 ACL Configuration dialog box displays Layer 3 access control list policy Click OK on the Add L3 ACL Configuration dialog box Creating a L3 ACL from a saved configuration Click OK on the Edit L3 ACL Configuration dialog box Editing a standard L3 ACL configurationEdit L3 ACL Configuration dialog box displays Creating an extended L3 ACL configuration Copying a standard L3 ACL configurationClick OK on the Duplicate L3 ACL Configuration dialog box Click Duplicate 586 53-1003056-01 L3 ACL Advanced Settings dialog box displays Editing an extended L3 ACL configuration Copying an extended L3 ACL configuration 589 Add L3 ACL IPv6 Configuration dialog box displays Creating an IPv6 L3 ACL configuration Click OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Click OK on the DeviceName L3 ACL Configuration dialog box Deleting a L3 ACL configurationAssigning a L3 ACL configuration to an interface 595 Clearing L3 ACL assignments Configuring hit statistics Configuring the ACL configuration type and operations Configuring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded To view all existing networks, complete the following steps Network configurationViewing existing networks Creating a network Layer 3 access control list policy Click the Networks tab Editing a network Deleting a network Copying a network Viewing existing network groups Network group configuration Review the List of Network Groups table Creating a network groupTo create a network group, complete the following steps Click the Network Groups tab To edit a network group, complete the following steps Editing a network group To copy a network group, complete the following steps Copying a network group Click OK on the Duplicate Network Group dialog box To delete a network group, complete the following steps Service configurationDeleting a network group Viewing existing services TCP UDP Creating a service Copying a service Editing a service Deleting a service Viewing existing service groups Service group configurationClick the Service Groups tab Review the List of Service Groups table Click Add Add Service Group dialog box displays Creating a service groupTo create a service group, complete the following steps To edit a service, complete the following steps Editing a service group Click OK on the Duplicate Service Group dialog box Copying a service groupTo copy a service, complete the following steps Media Access Control MAC filter management Media Access Control MAC filter managementDeleting a service group Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Editing a MAC filter Click OK on the MAC Filter Saved Configurations dialog box Copying a MAC filter 626 53-1003056-01 Assigning MAC filters Deleting a MAC filter Clearing MAC filter assignments Adding a MAC filter configuration to an interface Security configuration deployment Security configuration deployment Deploying a security configuration on demand Click OK on the Deploy to Products Layer 2 ACL dialog box Saving a security configuration deployment Deploy to Product/Ports dialog box Scheduling a security configuration deployment Select an ACL in the list and click Edit Edit Layer 2 ACL Configuration dialog box displays 634 53-1003056-01 635 636 53-1003056-01 Zoning overview Zoning Green Zone Online zoning Zoning naming conventions Offline zoning Configuring zoning Zoning configurationZone database size Zone database size Click New Zone Creating a zoneViewing zone properties Adding members to a zone Zoning configurationSelect Save to Switch from the Zone DB Operation list Click New Member Creating a member in a zoneRemoving a member from a zone Renaming a zone Duplicating a zone Deleting a zone Select Configure Zoning Fabric Enabling or disabling the default zone for fabricsCustomizing the zone member display Click Zoning Policies Click New Alias Creating a zone aliasEditing a zone alias Removing an object from a zone alias Renaming a zone alias Exporting zone aliasesDeleting a zone alias Click Export Alias Duplicating a zone alias Creating a zone configurationClick New Configuration Adding zones to a zone configuration Viewing zone configuration propertiesRemoving a zone from a zone configuration Zone Configuration Properties dialog box displays Click Activate Activating a zone configuration Click Deactivate Deactivating a zone configurationClick the Active Zone Configuration tab Deleting a zone configuration Renaming a zone configuration Creating an offline zone database Duplicating a zone configuration Select Delete from the Zone DB Operation list Deleting an offline zone database Select Refresh from the Zone DB Operation list Refreshing a zone databaseMerging fabrics Select Compare from the Zone DB Operation list Merging two zone databases Creating a common active zone configuration in two fabrics Exporting an offline zone database Saving a zone database to a switchYou cannot export an online zone database Select an offline zone database from the Zone DB list Rolling back changes to the offline zone database Zoning administrationImporting an offline zone database To compare two zone databases, complete the following steps Comparing zone databases Managing zone configuration comparison alerts Clearing the fabric zone database Setting change limits on zoning activation Finding a member in one or more zones Removing all user names from a zone databaseSelect Clear All from the Zone DB Operation list Select Undo CheckOut from the Zone DB Operation list Finding a zone member in the potential member list Finding zones in a zone configurationFinding a zone configuration member in the zones list Listing un-zoned members Listing zone members Click OK on the Offline Device Management dialog box Removing an offline deviceReplacing zone members Replacing an offline device by name Replacing an offline device by WWN 670 53-1003056-01 About port fencing Port Fencing About port fencing Viewing port fencing configurations 673 Thresholds C3 Discard Frames threshold Protocol error threshold Link Reset thresholdInvalid CRCs threshold Invalid words threshold State Change threshold Adding thresholdsAdding a C3 Discard Frames threshold Adding thresholds Add C3 Discard Frames Threshold dialog box displays Port Fencing dialog box Add Invalid CRCs Threshold dialog box displays Adding an Invalid CRCs threshold Add Invalid Words Threshold dialog box displays Adding an Invalid Words threshold Adding a Link Reset threshold Add Link Reset Threshold dialog box displays Add Protocol Error Threshold dialog box displays Adding a Protocol Error thresholdSelect Protocol Error from the Violation Type list Add State Change Threshold dialog box displays Adding a State Change threshold Assigning thresholds Avoiding port fencing inheritance Unblocking a port Click OK on the Edit C3 Discard Frames Threshold dialog box Editing thresholdsEditing a C3 Discard Frames threshold Editing an Invalid Words threshold Editing an Invalid CRCs thresholdEditing thresholds Click OK on the Edit Invalid CRCs Threshold dialog box Editing a Protocol Error threshold Editing a Link Reset thresholdClick OK on the Edit Link Reset Threshold dialog box Click OK on the Edit Invalid Words Threshold dialog box Editing a State Change threshold Click OK on the Edit Protocol Error Threshold dialog box Viewing all thresholds on a specific Fabric OS device Finding assigned thresholdsViewing thresholds Removing thresholds from individual objects Removing thresholds Removing thresholds from the thresholds table Removing thresholds Ficon Environments Ficon configurations Configuring a switch for Ficon operation Configuring a switch for Ficon operationPlanning the configuration 697 Select Discover Fabrics Configuring the switch Click Add License Click Download 701 Configuring an Allow/Prohibit Matrix Configuring Ficon display 703 Click Analyze Zone Conflicts Configuring an Allow/Prohibit Matrix manuallyClick Manual Allow/Prohibit Manual Allow/Prohibit dialog box displays, as shown in on Click OK on the Manual Allow/Prohibit dialog box Save As/Duplicate dialog box displays, as shown in on Copying an Allow/Prohibit Matrix configuration 707 Deleting an Allow/Prohibit Matrix configuration Activating an Allow/Prohibit Matrix configurationActivating an Allow/Prohibit Matrix configuration Confirmation message displays, as shown in on Cascaded Ficon fabric Changing the Allow/Prohibit Matrix displayChanging window arrangement Clearing port names Configuring a cascaded Ficon fabric Cascaded Ficon fabric Enabling DLS Cascaded Ficon fabric merge 713 Merging two cascaded Ficon fabrics Set up merge options screen displays Range is form 10 through 500 km. The default is 50 km Specify the Cable length between switch portsResolving merge conflicts TOV 717 Viewing port groups Select Configure Port GroupsPort Groups dialog box displays, as shown in on To view port groups, complete the following steps To edit a port group, complete the following steps Swapping blades Click OK Swapping blades 721 722 53-1003056-01 Element Manager CLI IP Element ManagerElement Manager overview Element Manager CLI Accessing the IP Element Manager CLI Select Configure Element Manager GUI Accessing the Element Manager interfaceElement Manager interface overview Element Manager interface overview Serial # Switch propertiesPort Count Build Label 727 Properties dialog box Ports tab Element Manager toolbar Displaying port properties Rx Power Tx PowerTemperature Tx Bias Current Port Mode You can compare physical and virtual port properties Comparing physical port propertiesComparing physical and virtual port properties Comparing physical and virtual port properties Table capabilities Status indicator iconsSearch Real-time performance monitoring Performance dataHistorical performance monitoring Real Time Graph/Table Historical Graph/Table Resetting port counters Configure dialog boxConfiguring Vlan Changing the standby Management Module to active Management Module switchoverEnable or Disable MR Switch Over Status dialog box Switch Fabric Module Port mirroring Configuring port mirroringPort mirroring Editing a port in port mirroring Select Configure Port MirroringAdding a port to port mirroring Deleting a port from port mirroring Configuring sFlow in Element ManagerSFlow Select Configure Element Manager Web Accessing the Web Management interfaceWeb Management interface Web Management interface Accessing the IP device front panel Web Management interface troubleshootingSelect Configure Element Manager Front Panel Element Manager Front Panel Configuration repository Configuration Repository and Backup Configuration repository 745 Saving the configuration status 747 Comparing product configurations Viewing the configuration 749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Change tracking Configuration deviationViewing configuration deviation status 754 53-1003056-01 Configuration Snapshots tab displays, as shown in Figure Configuration snapshots Comparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Click Save Snapshot Saving a configuration snapshot Searching the configuration snaphots Scheduling a configuration backup Schedule backup 763 Edit Automatic Configuration Backup dialog box displays Disabling a backup schedule Configuration requirements IP Configuration Wizard Payloads PayloadsPayload name Description Product Payloads DNS Select Configure Configuration Wizard Creating a payload configurationPayload name Description Interface Payloads Creating a payload configuration 769 770 53-1003056-01 Save to Flash and Reload Don’t Save to Flash or ReloadSave to Flash Configuration dialog box Deployment Schedule pane 773 Modifying a payload configuration Duplicating a payload configurationDuplicating a payload configuration Select a configuration from the Product Configurations list Modifying a payload configuration Deploying a payload configuration Deploying a payload configurationDeleting a payload configuration CLI configuration overview CLI Configuration Management This chapter Viewing existing templates Select Configure CLI ConfigurationViewing existing templates Creating a new product configuration Product configuration templatesProduct configuration templates To create a new configuration, complete the following steps 780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 CLI Credentials dialog box Changing product credentials Importing parameter values into a configuration Previewing CLI commands Different values for each target Previewing CLI commandsSame value for each target Select a row in the Parameters table Click Preview CLI command guidelines CLI command guidelinesCopying a product configuration Editing a product configuration To test a configuration, complete the following steps Testing a configuration Editing the CLI responses properties file Valid and invalid responses from devices Successresponsestart Editing the Network OS CLI responses properties fileSuccessresponseend Failureresponseend Valid and invalid responses from devices Configuration command response validation Using a dash character in CLI Configuration manager Deleting a configurationConfiguration error checking To delete a configuration, complete the following steps Deploying a configuration on demand CLI configuration deployment Creating a monitoring configuration Monitoring configurations 796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration Select Reports Product CLI CLI deployment reportsViewing CLI deployment reports Configuring a one-time deployment schedule CLI configuration schedulingConfiguring an hourly deployment schedule Product CLI Report displays Configuring a weekly deployment schedule Configuring a daily deployment scheduleConfiguring a monthly deployment schedule CLI configuration scheduling Configuring a yearly deployment schedule 806 53-1003056-01 Obtaining software files Image Repository for IP Products Viewing the list of boot images Boot image managementProducts supporting the image import Products supporting the image import Select Configure Firmware Management Manually importing boot images Deleting boot images from the Management application Deploying boot images to products Viewing the list of software images Software image managementManually importing software images Software image management Click OK on the Import Software Image dialog box Automatically retrieving software images from products Schedule Backup dialog box displays, as shown in Figure Right-clickConfiguration Schedule BackupDeploying software images to products Deleting software images from the Management application Unified image management Unified image managementViewing the list of unified images Import Firmware Image from File dialog box displays Importing unified images into the Management application Click OK on the Manual Import Unified Image dialog box Deploying unified images to products Updating unified imagesDeleting unified images from the Management application Complete the following steps Serial firmware update and activation for NOS devices Vlan Manager Default VlanVlan Management Private Vlan Remote Switched Port AnalyzerSuper-aggregated Vlan Transparent LAN Support Configuration requirements for Vlan Manager Displaying a list of VLANs Feature VCS FC mode Logical chassis mode Standalone modeVlan management in a VCS environment Vlan Manager tabs Displaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Adding or modifying port VLANs Port VLANs 828 53-1003056-01 Select Configuration Manager Vlan Manager Adding or modifying dual mode ports Assigning DCB ports to a Vlan L2 mode Tagged mode Adding Vlan properties 832 53-1003056-01 Deleting port VLANs from products Modifying port Vlan propertiesDeleting a port Vlan in Vlan view Deleting a port Vlan in Product view Deploying Vlan configurations Spanning Tree Protocol configurationSpanning Tree Protocol configuration Select a Save Configuration option Configuring STP or Rstp on a port Vlan IOS Vlan STP, Rstp Target context STP typeSTP, RSTP, Mstp FOS Vlan Mstp Deploying an STP configuration on a port Vlan Configuring Mstp on a product Adding an Mstp instance Assigning an Mstp instance to a Vlan Vlan routing Vlan routingManaging IP addresses on an SVI Deploy IP Configuration dialog box Vlan routing Click the Deploy now option Select a Save Configurations option Mpls Management Mpls pre-configuration Mpls licensing Mpls Licensed and Configured Products group Mpls overview Configuring LDP LSP Select the Admin Groups tab Figure Viewing LSP Admin Group informationSelect Configure Mpls LSP Select the Paths tab Figure Viewing LSP path information Select the Rsvp LSPs tab Figure Viewing Rsvp LSP information Related topics Mpls overview Viewing saved LSP configurations LSP Adding an LSP admin group Duplicating an LSP admin group Editing an LSP admin group Adding an LSP path Deleting an LSP admin group You can edit an LSP path by taking the following steps Editing an LSP path Deleting an LSP path LSP Delete Path Configuration wizard displays FigureDuplicating an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Editing an Rsvp LSP Delete Rsvp LSP Configuration wizard displays FigureDuplicating an Rsvp LSP Deleting an Rsvp LSP Duplicating a saved LSP configuration Editing a saved LSP configurationSelect the saved configuration Click the Edit button Select the saved configuration Click the Duplicate button Select the saved configuration Click the Delete button Deleting a saved LSP configurationDisplaying LSP Topologies Select Monitor Mpls LSP Topology LSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 Viewing VLL instances Select Configure Mpls VLLVLL manager Status VLL Mode Tag Mode To view current saved VLL configurations, do the following Viewing Saved VLL configurations To add a new VLL instance do the following Adding or editing a VLL instance Configuring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box VLL Configuration wizard Deploy Target Actions dialog box Deploying target actions using the VLL Manager VLL configuration wizard Deployment Properties Deploying VLL properties using the VLL Manager VLL configuration wizard Deployment Schedule dialog box Scheduling deployment using the VLL Manager Reviewing the VLL Manager summary Reviewing the VLL Manager configuration Editing a VLL instance Creating a new VLL instance using duplicateDeleting VLL instances To edit a VLL instance, do the following VLL Monitor Dialog box displays Figure Filtering VLL traffic monitoringSelect Monitor Mpls VLL VLL Virtual Private LAN Services Vpls overview 883 Vpls Manager Select Configure Mpls VplsViewing Vpls instances and peer topologies Vpls Manager Endpoint settings PE Devices Vpls settings Vpls Manager Peer Topology tab To view current Vpls configurations, do the following Viewing Saved Vpls configurations Adding or editing a Vpls instance Vpls Configuration wizard Device Configuration dialog box Configuring devices using the Vpls Manager Row is added to the Configured Endpoint Settings list Configuring endpoint settings Deployment Properties page displays Figure Deploying target actions using Vpls Manager Vpls Configuration wizard Deployment Properties dialog box Deploying Vpls properties using Vpls Manager Vpls Configuration wizard Deployment Schedule dialog box Scheduling deployment using Vpls Manager Creating a new Vpls instance from a duplicate Reviewing the Vpls Manager summary To edit a Vpls instance, do the following Editing a Vpls instanceDeleting a Vpls instance Vpls Monitor dialog box displays Figure Filtering for Vpls traffic monitoringSelect Monitor Mpls Vpls Vcid pools Select Configure Mpls Vcid PoolViewing, creating, and deleting Vcid pools Vcid pools Configuring a maintenance association 802.1ag Connectivity Fault Management 802.1ag CFM Add Maintenance Association dialog box displays 900 53-1003056-01 802.1ag Connectivity Fault Management Editing a maintenance associationClick Close on the Configure 802.1ag CFM dialog box Edit Maintenance Association dialog box displays 902 53-1003056-01 903 28 802.1ag Connectivity Fault Management Adding a MEP to a maintenance association 905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Click Loopback Sending a linktrace message Click Linktrace Configuring frame delay 915 916 53-1003056-01 VIP Servers Select Configure Application Delivery VIP ServersVIP Servers overview Viewing the VIP Servers Viewing the VIP Servers Viewing VIP Server information Viewing VIP Server information VIP Servers list Server port statistics Enabling or disabling servers or server portsEnabling servers or server ports Disabling servers or server ports Deleting a row from the Server Port Statistics list Gslb Manager Global Server Load Balancing To view the Gslb Manager, perform the following steps Select Configure Application Delivery GslbViewing the Gslb Manager Creating a Gslb policy Gslb policy managementGslb policy management To create a Gslb policy, perform the following steps 926 53-1003056-01 Applying metrics on the Metrics tab Adding a prefix on the Prefix tab Connection Load Weights Importing IP addresses from a file Deleting a prefix from the Prefix list 930 53-1003056-01 Gslb site management Adding a site configurationGslb site management Adding ServerIron ADX products to the site Adding a zone configuration Gslb zone configurationGslb zone configuration Managing zones Add Hosts dialog box Adding a host to a zone List of IP Addresses and Weights dialog box displays Editing the list of IP addresses and weightsDeleting a zone configuration Controller Configuration tab displays Controller configurationController configuration Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL certificates SSL Certificates for ServerIron Products Accessing SSL certificates on the Certificate View tab SSL certificate configurationSSL Certificates dialog box has two tabs Certificate View tab Figure Product View tab Figure 945 SSL Certificates dialog box Product View tab Accessing SSL certificates on the Product View tab Generating a certificate signing request 948 53-1003056-01 949 Related topic Adding an SSL certificate and key file Editing an SSL certificate and key file Viewing SSL certificate details Duplicating an SSL certificate and key file Importing certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Chaining SSL certificates Appending SSL certificates 960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Select Configure Task Scheduler Editing a deployment configurationDeployment Manager Introduction to the Deployment Manager Duplicating a deployment configuration Deploying a configuration Deleting a deployment configurationViewing deployment logs Generating a deployment report Searching the configuration snapshots Generating a deployment configuration snapshot report 967 968 53-1003056-01 SAN performance overview Performance Data SAN performance overview SAN performance measures SAN performance management requirements Example of default access control list Example of Snmp Example of setting Snmp 974 53-1003056-01 FCIP-MIB YES Snmp GETSnmp SET Generating a real-time performance graph SAN real-time performance dataSAN real-time performance data Select Monitor Performance Real-Time Graph Open the Real Time Performance Graphs dialog box Filtering real-time performance dataReal Time Performance Graphs dialog box displays Graph display Performance statistics counters Exporting real-time performance dataProtocol Fcip Snmp HBA, CNA HCM API HttpFC, GE HBA, CNA Type Protocol Source OID value IP performance monitoring and traffic analysis IP configuration requirements IP real-time performance monitoring IP real-time performance monitoringMonitoring real-time performance 984 53-1003056-01 Click Sources from the Real Time Graphs/Tables dialog box Adding products and ports to real-time performanceRemoving products and ports from real-time performance Removing measures from products Adding measures to productsSelect measures Real Time Graphs/Tables dialog box displays Click Mibs tab in the Available Measures area Adding measures to ports Adding collectibles to monitoring Removing measures from ports Removing collectibles from monitoring Configuring the performance graphConfiguring the performance graph display Show data points graph Minutes Hours Day Configuring graph options Graph Options dialog box Historical Graphs/Tables dialog box 993 Printing a graph Exporting a graphChoose Export File Format dialog box displays Spreadsheet .csv Image .png IP historical performance monitoring Displaying historical data collectors Editing system collectorsIP historical performance monitoring Name Collector Basics 997 Adding or editing a historical data collector Enabling a historical data collector 999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Duplicating a historical data collector Configuring a MIB walk instanceAdding third-party device MIB objects manually Adding, editing, or duplicating a user-defined expression Deleting a historical data collectorDuplicating system data collectors Select Monitor Performance Historical Data Collectors 1007 Complete the following steps to delete an expression Deleting an expression Select the Data Monitoring tab Viewing Historical Graphs/Tables NetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs Mapping a MIB object to a unit name MIB data collectorsMIB data collectors To map a MIB name, use the following format Creating a custom report IP Custom performance reportsIP Custom performance reports Complete the following steps to create a report 1015 Time Settings Sampling Granularity 1017 Click the Identification tab Exporting an Snmp Monitor report Interpreting the Snmp Monitor report IP sFlow configuration IP sFlow configurationConfiguring sFlow Interface Speed Sampling rate IP sFlow configuration Click NextInterface Payload sFlow Settings dialog box displays Product Payload SFlow Destination dialog box displays Click Next Select the Report Definitions tab Creating custom sFlow reports IP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Add Report Definitions dialog box, User Identification tab Select the User Identification tab Add Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Select Monitor Traffic Analysis Custom Reports Scheduling custom sFlow reports 1035 1036 53-1003056-01 Suspending a custom sFlow report schedule Device-level configuration requirementsIP Traffic analyzer monitoring and sFlow reports Displaying sFlow monitoring reports 802.1X configuration requirementsIP Traffic analyzer monitoring and sFlow reports Select Monitor Traffic Analysis Monitor sFlow Report list Selecting a report Measure list This field shows the date and time the report was requested Save and close the ipconfig.properties fileInterpreting an sFlow traffic report Viewing top MAC talkers Category list, select L3/L4 Reports Viewing top Vlan talkers Viewing all IPv4 Layer 3 or Layer 4 Top Talkers Viewing all Layer 3 and Layer 4 traffic Reports list, select IPV4 Next list, select TCP Viewing IPv4 top TCP talkers TCP Viewing IPv4 top UDP talkers Icmp Viewing IPv4 top Icmp talkersCategory list, select L3 or L4 Reports Viewing IPv6 Top Talkers Viewing IPv4 Others Viewing other Layer 3 or Layer 4 Top Talkers Defining invalid TCP packet combinations Enabling and viewing TCP reportsRST-SYN RST-FIN RST-PSH RST-URG FIN-SYN Complete the following steps to change these combinations Type list, select Invalid TCP Flags Displaying the invalid TCP Flags reportValid TCP flags report Viewing VCS fabric Top Talker reports Viewing BGP paths report IP traffic accounting Troubleshooting sFlow reportsIP traffic accounting Select Monitor Traffic Analysis Traffic Accounting 1055 1056 53-1003056-01 Frame Monitor Frame Monitor Scsi RW Frame typesScsi Frame Monitoring requirements Creating a custom frame monitor Frame Monitor Configuration Status dialog box Assigning a frame monitor to a port Editing a frame monitor Removing a frame monitor from a port Finding frame monitor assignments Removing a frame monitor from a switch 1064 53-1003056-01 Power center overview Power Center Viewing PoE data for products Select Monitor Power CenterData monitoring To view PoE data for a port, complete the following steps Viewing PoE data for ports To filter port details, complete the following steps Filtering port details Viewing attached device properties 1070 53-1003056-01 To view a PoE chart, complete the following steps Viewing PoE charts 1072 53-1003056-01 1073 Refreshing PoE data Configuring automatic data refresh PoE power on demandPowering up PoE-capable ports on demand PoE power on demand Powering down PoE-capable ports on demand Scheduling an power up deployment Schedule PoE power deployment Schedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Scheduled Ports ScheduleName dialog box displays Click Show Ports Deleting a power deployment schedule PoE thresholds PoE thresholdsAdding a PoE product threshold PoE Consumption Consumption % PoE Allocation Adding a PoE port threshold Port allocation Port consumption Port consumption % Thresholds dialog box Choose one of the following measures To view PoE thresholds, complete the following steps Viewing PoE thresholds Updating a PoE threshold To update a PoE threshold, complete the following steps To disable PoE thresholds, complete the following steps To enable PoE thresholds, complete the following stepsEnabling PoE thresholds Disabling PoE thresholds Viewing PoE performance Monitoring real time power performance on productsDeleting PoE thresholds Viewing PoE performance 1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy monitor overview Policy Monitor Policy monitor overview Fabric policy monitors Switch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Next Run Next time the policy will run using the format Preconfigured policy monitorsManagement policy monitor Frequency Weekly Viewing policy monitor status Viewing existing policy monitors Select Monitor Policy Monitor Adding a policy monitor 1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Policy monitor scheduling Configuring a one-time policy monitor schedule Configuring a daily policy monitor schedule Configuring an hourly policy monitor scheduleConfiguring a weekly policy monitor schedule Configuring a monthly policy monitor schedule Deleting a policy monitor Editing a policy monitor Predefined configuration rules Configuration rulesViewing a predefined configuration rule Add Configuration Rule dialog box displays Figure Viewing configuration rule detailsConfiguration rules Port Profile Interface Rule expressions 1118 53-1003056-01 1119 Click Cancel on the Add Configuration Rule dialog box Adding a configuration rule Click OK on the Add Configuration Rule dialog box Duplicating a configuration rule Click Add Configuration Rule Editing a configuration ruleClick the Switch/Router Checks tab Importing a configuration rule Exporting a configuration ruleDeleting a configuration rule Click OK on the Edit Configuration Rule dialog box Add Configuration Rule dialog box displays Viewing predefined configuration conditionsAdding a configuration condition Add Condition dialog box displays Figure Select Add Condition Selecting a product Duplicating a configuration condition You cannot edit a predefined configuration condition Editing a user-defined configuration condition Predefined conditions Configuration rules Predefined conditions Policy Monitor dialog box displays Click Add Viewing a predefined configuration block Configuration rules Add Monitor dialog box displays Adding a configuration blockSelect Add Block Add Block dialog box displays Figure Select the Switch/Router Checks tab Duplicating a configuration block You cannot edit a predefined configuration block Editing a user-defined configuration block Click Delete Click Yes on the confirmation message Deleting conditions and blocksPredefined blocks Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report 1137 Click Export File Download dialog box displays Click Save Exporting a policy monitor report Viewing historical reports for a policy monitor Viewing historical reports for all policy monitorsPolicy Monitor dialog box displays Click History Viewing historical reports for a policy monitor Fault management overview Fault Management Restrictions Event notificationSupported IP address types Event Purging 1143 Defining filters Setting up basic event filteringDefining filters Click Advanced Setting up advanced event filtering 1146 53-1003056-01 Snmp traps Select Monitor Snmp Setup Product Trap Recipients Adding a trap recipient to one or more switchesSnmp traps Snmp Trap Recipients dialog box, shown in , displays Select Monitor Snmp Setup Trap Forwarding Removing a trap recipient from one or more switchesSnmp trap forwarding Snmp Trap Forwarding dialog box, shown in , displays Adding a trap destination Select the Enable trap forwarding check box Adding a new trap filter 1152 53-1003056-01 Event reception Do not accept Snmp v1/v2c traps Event Reception dialog box, shown in , displaysAccept Snmp v1/v2c traps with any community string Accept Snmp v1/v2c traps with only these community strings Adding an Snmp v3 credential Snmp traps Snmp security and authenticationPrivacy protocol Authentication Result Credential type Importing a new MIB into the Management application Adding an Snmp v1 or v2c community string Trap customization Registering traps Click the Registered button Unregistering a registered trapCustomizing a registered trap definition Snmp informs Reverting the customization of a registered trap to defaultEnabling or disabling Snmp informs Select a product group from the Fabric / Products list Adding a syslog recipient Syslogs To remove a syslog recipient, complete the following steps Removing a syslog recipientSyslogs Select the Enable syslog forwarding check box Select Monitor Syslog Configuration Syslog ForwardingAdding a syslog forwarding destination Syslog Forwarding dialog box, shown in , displays Adding a syslog filter 1165 Snort message forwarding Event action definitionsCreating an event action definition Select Monitor Event Processing Event Actions Event action definitions Selecting an event for an event action 1168 53-1003056-01 Configuring varbind filters Sources pane of the Add Event Action dialog box Selecting source address products and ports Click Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Acknowledging special events Special events handling 1177 Configuring event action e-mail settings Modifying an event action definition Click Cancel to cancel the operation Deleting an event action definition Configuring event actions for Snort messages Import Snort Rule File dialog box displays, shown in Figure Pseudo eventsClick the Import Snort Rule button Creating pseudo event definitions Displaying pseudo event definitionsSelect Monitor Event Processing Pseudo Events Pseudo Events dialog box, shown in , displays Setting pseudo event policies Filtering pseudo event traps 1185 Deleting a pseudo event definition Editing a pseudo event definition Adding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Select Reports Event Custom Reports Defining report settingsEvent custom reports Defining the report identity 1196 53-1003056-01 To filter a report definition, complete the following steps Filtering a report definition Add/Edit Report Definition dialog box Filter tab Add/Edit Report Definition dialog box Product tab displays Filtering report events by date and time 1200 53-1003056-01 Editing a report definition Event custom report schedules Event custom report schedulesDeleting a report definition Adding or editing an event report schedule One Time Viewing event logs Event logsCopying part of a log entry Event logs Exporting the entire log Copying an entire log entry Displaying event properties from the Master Log Mailing all event details from the Master LogMailing selected event details from the Master Log Event Field Description Event logs Event PropertiesClick Close to close the Event Properties dialog box Copying the entire Master Log Copying part of the Master LogExporting the Master Log Select Table Copy Table Filtering events in the Master Log ‘unnamed’ filter Editing a Filter ‘none’ filterDuplicating a Filter Deleting a Filter Select Configure Packet Capture Pcap Configuring packet capturesConfigure Pcap dialog box, shown in , displays Packet Capture Pcap 1214 53-1003056-01 Capturing Server and Client support save data Technical SupportServer and client support save Capturing Server support save data Capturing Client support save data Server and client support save Client support save using a command line interface Scheduling technical support information collection Device technical supportDevice technical support Click the Schedule tab Select the Enable scheduled Technical Support Data check box 1221 Click OK on the Technical SupportSave dialog box Starting immediate technical support information collection Click the Generate Now tab, if necessary Field Description Click Close on the Technical SupportSave Status dialog boxFirmware Type Progress Viewing the technical support repository Type Default location Default naming convention Click OK on the Technical Support Repository dialog box Saving technical support information to another locationAvailable SupportSave Mail button Mailing technical support information Select the file you want to delete in the table Click Delete Deleting technical support files from the repository 1229 1230 53-1003056-01 Reports overview ReportsViewing IP reports Browser requirements Exporting IP reports to e-mail recipients Exporting and saving IP reports to a fileSelect Export as Html Select Export as CSV Select E-mail as Html Select E-mail as CSV IP Wired Products report IP report contents IP Wired Products report Stacking Units Detailed Product ReportExport button Realtime Stacking PortModules IP Addresses Physical Ports Cluster Peer MCTGRE Tunnels Controller Cluster AP List Count Detailed Cluster Report Nodes System InformationSystem Name values Physical Media IP Module reportFC Ports Field/ComponentDescription IP Port VLANs reportIP Layer 3 Vlan report IP Subnet report Layer 3 Vlan report fields and components IP Subnet report MAC Address report IP Address reportIP Address report Port Name IP Physical Ports Realtime report IP Physical Ports Realtime reportIP Stacking Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime report Viewing a deployment report IP Deployment reportsIP Deployment reports Select Reports Deployment Reports Template Manager overview Preconfigured reportsUser-defined reports Reports Template Manager overview Report Template Manager dialog box displays Figure Accessing the Report Template ManagerSelect Reports Report Manager Viewing a report Deleting reports Importing a report templateExporting a report template Report content and functions Product Count Products List report IP address of the product Displayed for products that support stacking Physical port information for each port on the product Product Report Cluster Ports Tx/Rx Ratio report Device Name Summary table LocationDetailed Product Report Total Received MB Max Rx Utilization % Low Traffic Ports reportMax Tx Utilization % Exporting data from the report Application menus Menu Command Command OptionsThis appendix Dashboard main menus IP main menus Command Command OptionsIP main menus Edit Menu Discover Menu Element Manager. Select to configure a selected device Configure Menu Lsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu Tools Menu IP shortcut menusIP shortcut menus IP shortcut menus IP Subnet Component Menu/Submenu Commands CommentsIronWare device Launches the Real-Time Graphs / Tables dialog box L2 ACL DCB VCS/VDX Third-party device 1273 1274 53-1003056-01 IP Call Home Event Call Home Event TablesNetwork OS Call Home Event Event reason code FRU code/Event type Description Severity Call Home Event Tables Network OS Call Home Event Product status events Event Categories Product audit events Security events for FC devices Security eventsSecurity events for IP devices Security events Management server events User action events IP Performance monitoring events Product eventsProduct events Trap name IP Performance monitoring events About user privileges User Privileges Privilege Description No Privilege Read-Only Read/Write About user privileges Application privileges and behavior Event Notification Setup button in the Users dialog box Setup Mail server used to Send e-mail Disables Event Registration Options commandForwarding dialog box Monitor menu Event Storage option Syslog Registration Enables the Security L2 Management commandUpdate and OK Performance Graphs dialog box and enables all controls Policy monitors Command on the Monitor Menu Disables Policy Monitor Enables Policy Monitor Server Options menu Configure Switch Replicate menuLogs menu View Repository Technical Support menu Repository commands SupportSave, Upload Repository command Upload Failure DataCapture, and View Monitor Technical 1291 Zoning Cancel and Help buttonsCompare/Merge dialog Compare and Export Compare/Merge dialog Zone Config tab Switch, Activate Zoning Scope list does Edit Limits commandLsan Zoning Device IP CLI About user privileges IP privileges and behavior Filter IP L3 ACL IP Mpls Vpls IP Mpls VLLIP MPLS- LSP Profile tab Application Features and Role Access Levels About Roles and Access LevelsAbout Roles and Access Levels IP privileges and behavior 1299 IP Mpls LSP Viewing Fabric properties Device PropertiesViewing SAN device properties Click OK on the FabricName Properties dialog box to close Viewing SAN device propertiesViewing SAN device properties Fabric properties Viewing SAN device properties Device properties Remote Switch Name Preshared key configuredRemote Switch IP Remote Switch WWN Select Edit Properties Viewing Storage propertiesICL Viewing SAN device properties Viewing iSCSI Properties dialog box Digest Error Count Command Descriptor Block CountISCSI Service ISNS Service Viewing port properties Additional Port Info Class of ServiceAddress Active FC4 Types Viewing SAN device properties Port properties ISCSI button Long Distance SettingISCSI Capable Locked Port Type Troubleshooting list Symbolic NamePort Speed Gb/s Port State Viewing IP device and port properties IP device propertiesIP device properties Port properties User Port # Config Mode VCS ModeDetailed Report button Alias IP device properties Access Points tab Profile ModePort Profiles tab Show list Transceiver Temperature Connected switch \ PortChassis-Power Supply section of Detailed Report Device MAC Viewing VCS fabric properties Access Gateway Mode Licensed FeaturesNodes tab Fabric Status VLANs MAC CountDomain Count Associated MACs list Native VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port SFP/Port Optics Host propertiesHost properties Field Description Viewing adapter port properties Host properties Adapter port properties Adding a property field Properties customizationProperties customization Adapter port properties Click OK to close Deleting a property field Editing a property field Editing a property field directly Properties customization Construct Matches Regular ExpressionsCharacters Character classes Regular Expressions CharactersPredefined character classes Posix character classes US-ASCII only Java.lang.Character classes simple java character type Regular Expressions Posix character classes US-ASCII onlyClasses for Unicode blocks and categories Boundary matches Reluctant quantifiers Regular Expressions Greedy quantifiersPossessive quantifiers Logical operators Special constructs non-capturing Regular Expressions Back references Regular Expressions CLI Templates CLI Templates HyperEdge Stack Disable HyperEdge Stack EnableHyperEdge Stack Port Creation HyperEdge Stack Port Deletion IronWare OS Configure L3-Access-List IronWare OS Enable Web Element ManagerCLI Templates HyperEdge Stack Trunk Deletion HyperEdge Peri Port Creation MCT Cluster Creation CLI Templates IronWare OS Configure L2-Access-ListMCT Cluster Deployment MCT Cluster Undeployment Mpls Core Interface Configuration Mpls Loopback Interface ConfigurationCLI Templates MCT Cluster Deletion MCT Client Creation Network OS Configure CRC Align Errors Monitor CLI Templates Mpls Endpoint ConfigurationNetwork OS Associate MAC to Port Profile Ampp Network OS Configure Inter Frame Gap Violation Monitor CLI Templates Network OS Configure Extended L2 Access ListNetwork OS Configure Inter Frame Gap Violation Fencing Network OS Create CoS Mutation Map Network OS Configure RX Symbol Errors MonitorNetwork OS Configure Standard L2 Access List Network OS Create Port Profile CLI Templates Network OS Create Lldp ProfileNetwork OS Create Traffic Class Map Network OS Create Vlan Classifier Group Network OS Update QoS on Port Profile Network OS Update ACL on Port ProfileNetwork OS Update Vlan on Port Profile CLI Templates Network OS Create Vlan Classifier Rule Private Vlan Delete Pvlan configuration from Vlan CLI Templates Private Vlan Configure Vlan as a PvlanPrivate Vlan Configure Pvaln mode in L2 interface Private Vlan Add native Vlan mode to Pvlan trunk Private Vlan Delete Pvlan associations from host port Private Vlan Delete Pvlan mapping from promiscuous portPrivate Vlan Delete Pvaln associations from trunk port $PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGER VRF Maximum routes configuration for IPV4 Address Family VRF Route Distinguisher ConfigurationVRF Route Targets Export and/or Import Configuration VRF Delete Route Targets Export and/or Import Configuration IronWare OS Vlan Enable Spanning Tree Protocol on IOS Vlan IronWare OS Vlan Configure virtual routing interfaceCLI Templates VRF Display VRF Information IronWare OS Vlan Remove interfaces from Vlan as untagged Network OS Vlan Native Vlan Configuration Network OS Vlan Layer2 Switch Port ConfigurationNetwork OS Vlan Vlan Interface Creation Network OS Vlan Vlan Interface Deletion Network OS Vlan Enable Spanning Tree Protocol on NOS Vlan Network OS Vlan Access Interface ConfigurationNetwork OS Vlan Disable Access Interface Configuration 1356 53-1003056-01 Troubleshooting Browser troubleshooting Application Configuration Wizard troubleshooting Configuration backup and restore troubleshooting Client browser troubleshootingElement Manager troubleshooting Client browser troubleshooting Firmware download troubleshooting Firmware download troubleshooting Sw0FID128admin sshutil delknownhost Select Start Settings Control Panel Java Launch Client troubleshootingLaunch Client troubleshooting Unix operating systems Master Log and Switch Console troubleshootingMaster Log and Switch Console troubleshooting Patch troubleshooting Patch troubleshootingClick the Global Settings tab Select Discover IP Products Professional edition login troubleshooting Professional edition login troubleshootingServer troubleshooting Management console errors Server Management Console troubleshootingServer Management Console troubleshooting Select Properties Supportsave troubleshootingSupportsave troubleshooting Wireless troubleshooting Technical support data collection troubleshootingTechnical support data collection troubleshooting Problem Master log warning message Zoning troubleshooting Wireless troubleshooting Zoning troubleshooting Zoning troubleshooting Database Fields AchcallcenterconfigDatabase tables and fields Achcallcenter Acheventfiltermap Database tables and fields AcheventAchfilter Achinfo Adapterportconfigproperty AdapterportconfigdetailsAdapterdriverfiledetails Aordevicegroupmap Aorfabricmap AordevicemapAorhostmap Aorinmportgroupmap Birtreportruntemplate AvailableflyoverpropertyBirtreportparameter Bootimagedrivermap BirtreportscheduleconfigBootimagefiledetails Database tables and fields Birtreportruntemplate Bootlunsequence Database tables and fields BootimagefiledetailsBootlunsequencedetail Capability Database tables and fields Card Cedapplication CardcapabilityCedapplicationmember Ceduserpreference Ceeport Cfgbackuparchive Clitemplate Database tables and fields CfgbackuparchiveChangelog Clientview Database tables and fields Clitemplate Clientviewmember ClientviewcolumnClientviewmemberhost Cluster Cnaproductconnectivity CnaethportconfigCnaethport Collector Database tables and fields CnaethportconfigCnaport Collectormibobjectentry ConfigblockCollectorsnmpexpressionentry Collectortargetentry Coreswitch Configcondition Database tables and fields Coreswitch Coreswitchchecksum CoreswitchcapabilityCoreswitchcollection Coreswitchdetails Database tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Cryptotargetcontainer Database tables and fields Cryptoswitch Dashboard Database tables and fields CryptotargetcontainerCustomfavoritesobjectlist Dashboardcanvas Database tables and fields DashboardDashboardcanvaspreference Dashboardprovider Dashboardwidget Dashboardwidgetpreference DefaultfavoritesDatabase tables and fields Dashboardwidget Deploymentconfiguration Database tables and fields DefaultfavoritesDefaultwidgetpreference Deploymentproductstatus Database tables and fields DeploymentconfigurationDeploymenthandler Deploymentstatus Database tables and fields DeploymentproductstatusDeploymentreporttemplate Device Deploymenttargetmap Database tables and fields Device Tacpasswordreadonly TacpasswordportcfgTacpluspasswordportcfg Tacpluspasswordreadonl Trapregistered LicensedfeaturesPortcount Mplsmanagestate Productfamily IsdcbswitchNetconftransport =SSH =HTTPS =WINGHTTPS Poecapable Wirelesstype IsprincipalswitchVcsid Vcslicensed Deviceenclosure Deviceconnection Database tables and fields Deviceenclosure Devicefdmidetails Deviceenclosuremember Devicegroupentry Database tables and fields DevicefdmidetailsDevicegroup Devicenode Database tables and fields DevicegroupDevicemacgroupmapping Deviceport Database tables and fields Devicenode Deviceportmacaddressmap Deviceportgigeportlink Encryptionengine Diskusage Encryptiongroup Database tables and fields Encryptionengine Database tables and fields Encryptiongroup Encryptionkmipparameters Encryptiongroupmember Ethernetisl EncryptiontapepoolEthernetcloud Database tables and fields Ethernetisl Event Eventcallhome Database tables and fields EventEventcategory Eventdescription Eventfwdfilter Eventdetails Eventmodule Database tables and fields EventfwdfilterEventinstance Eventpolicy EventnotificationEventorigin Eventpolicysourceentry Database tables and fields Eventpolicy Eventprocessormap EventruleDatabase tables and fields Eventpolicysourceentry Eventruleaction FabricDatabase tables and fields Eventrule Database tables and fields Fabric Fabriccollection Fabricchecksum Fabricdiscoverypolicy Database tables and fields FabriccollectionFabricdiscoverypolicyrule Fabricmember Favorites FabricthresholdsettingDatabase tables and fields Fabricmember Fabricvcsclustermap Fcipporttunnelmap Database tables and fields FavoritesFcipcircuitportmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Securityflag MismatchedconfigurationsCircuitstatus Circuitstatusstring Fciptunnelperformance Featureeditionmap FeatureFeaturesusage Fcoedevice Firmwarefiledetail Database tables and fields FeaturesusageFicondeviceport Foundrymodule FirmwareswitchdetailFoundrydevice Foundryphysicaldevice Database tables and fields FoundrymoduleFoundryphysicalport Fporttrunkgroup FRU Generatedreport FtpserverDatabase tables and fields FRU Database tables and fields Generatedreport Gigeport Gigeportstats GigeportethernetcloudlinkGlobalvlan Gretunnelinterface HBA Hacluster Database tables and fields HBA Hbanodemap Hbaport Operatingtopology SwitchipSUPPORTEDFC4TYPES Supportedcos Hbaportdetail Database tables and fields Hbaportdetail Hbaportfcoedetails Hbaportdeviceportmap Database tables and fields Hbaportfcoedetails Hbaremoteport Hbaremoteportlun Database tables and fields Hbaremoteport Healthstatus HbatargetHealthtargetstatus Hostdiscoveryoption Hostdiscoveryrequest Database tables and fields HostdiscoveryoptionHostdiscoveryreqgroup Hypervvirtualmachine Database tables and fields Hostdiscoveryrequest Interface HypervvmhbaportmapIFL Ipdevicelicense InterfacedeploymentconfigDatabase tables and fields Interface Ipportgroup Database tables and fields IpdevicelicenseIpinterface Ipsubnetvlan IprouteIpxnetworkvlan ISL Targetswitchportid SourceswitchportidDatabase tables and fields ISL Islconnection Masterconnectionid IsltrunkgroupSourcemasterport Targetmasterport Keyvault L2ACCESSCONTROLENTRYIsltrunkmember L2ACCESSCONTROLLIST Database tables and fields L2ACCESSCONTROLENTRYL2ACLDEVICEDEPLOYMAP L2ACLINTERFACEDEPLOYMAP L2NEIGHBOR Database tables and fields L2ACLINTERFACEDEPLOYMAPL3ACLDEVICEDEPLOYMENTMAP L3ACLINTDEPLOYMENTMAP Lagmember LAGDatabase tables and fields L3ACLINTDEPLOYMENTMAP Launchincontextmodule LastconfigupdatetimeDatabase tables and fields Lagmember Licensedowngradedetails LicenseDatabase tables and fields Launchincontextmodule Licensedfeature LicensefeaturemapDatabase tables and fields Licensedowngradedetails Licenserule Lock LsantagconfigLsandevice Lsanproxydevice Lsanzone LsanzonedbconfigLsanzonemember Mctclient Macfilterdevdeploymentmap Database tables and fields MacfilterMacfilterintdeploymentmap Macgroup Mapsevent MacgroupMacgroupmember Managedelement Mapseventcauseaction Database tables and fields MapseventMapseventdetails Measure MapspolicyMarchingants Migrationhistory ModuleMessagerecipient Database tables and fields Module Mplsadmingroupinterfacerelation MplsadmingroupMplslsp Moduleslotpresent Mplsrsvplsp MplspathMplspathhop Mplsrsvplspadmingroupcontainer MplsrsvplspadmingroupDatabase tables and fields Mplsrsvplsp Mplsrsvplspactuallyroutedhop Mplsrsvplspparameters Mplsrsvplspfrrparameters Database tables and fields Mplsrsvplspparameters MplsserviceMplsrsvplsppath Mplsrsvplsptunnelresource Mplsserviceendpointrelation Database tables and fields MplsserviceMplsservicedevicerelation Mplsservicepeerrelation Database tables and fields MplsserviceendpointrelationMrpring Mrpringdevice Database tables and fields Mrpringdevice Networkvlan N2FPORTMAPNetworkscopetype Nicprofile Npflowdefinition Database tables and fields Nportwwnmap Ouiguesseddevicemap Database tables and fields NpflowdefinitionNpsubflow Pbrinterfaceconfig PasswordhistoryOuivendor Perfcollector Pbrrule PbrpolicyPbrnexthop Pbrruleacllist Physicaldevice Database tables and fields PbrruleacllistPhantomport Physicalinterface Database tables and fields Physicaldevice Pmcollectortargetsetting PmcollectormeasuresettingDatabase tables and fields Physicalinterface Physicalport Pmdashboardwidget Database tables and fields PmcollectortargetsettingPmcollectortimeseriesmapping Pmdatacollector Database tables and fields Pmdashboardwidget Pmstatsagingpolicy PmmeasureDatabase tables and fields Pmdatacollector Pmwidgetmeasuretypeentry PmwidgetmeasuretypePmwidgetmonitortype Pmwidgettargetentry Pmwidgettopncollectorentry Database tables and fields PmwidgettimeseriesentryPmwidgetuserentry Poethreshold Poethresholdevent Database tables and fields PoethresholdPolicyrule Policyrulemap Portcommissioncimomserver PortbottleneckconfigPortbottleneckstatus Portfencingpolicymap Database tables and fields PortcommissioncimomserverPortfencingpolicy Portprofiledomain Database tables and fields PortfencingpolicymapPortprofile Portprofileinterfacemap PortprofiledomainmapPortprofilemacmap Portprofileqosmap Portprofilevlanmap Portprofileqospfcmap Portvlan Productapp PrivilegeDatabase tables and fields Portvlan Qrtzblobtriggers ProtocolvlanQrtzcalendars Qrtzcrontriggers Qrtzjobdetails QrtzlocksQrtzjoblisteners Qrtzpausedtriggergrps Qrtzsimpletriggers Database tables and fields QrtzschedulerstateQrtzjtriggerlisteners Qrtztriggers Raslog RecoverycardgroupmappingQuerybaseddevicegroup Quorumcardgroupmapping Reporttemplate ReporttypeReportdrilldowntemplate Resourcefabricmap Resourcehostmap RoleRoleprivilegemap Ruleblockmap Sanconnection SANRulelogicalexpressionmap Securitypolicy ScomhostDatabase tables and fields Sanconnection Selectedflyoverproperty SensorSensorid Currentreading Sflowhoursummary Sflowcheckpoint Outpriority InprioritySrcmac L3SRCADDR Sflowminutebgp Sflowiprouteinfo Sflowminutebgpslnum Database tables and fields SflowminutebgpSFLOWMINUTEL3SLNUM Sflowminutemac Sflowminutemacslnum Database tables and fields SflowminutemacSflowminutesummary Sflowminutevlan Sflowminutevlanslnum Database tables and fields SflowminutevlanSFLOWREPORTL3SOURCE SFLOWREPORTL4SOURCE Database tables and fields Sflowstaging Sflowstagingslnum Smartcard Smiasanname Database tables and fields SmartcardSnapshotproductstatus Snmpcredentials Database tables and fields Snmpcredentials Snmpdata SNMPDATA1DAY Database tables and fields SnmpdataSNMPDATA2HOUR Mibindex SNMPEXPRDATA1DAY SNMPDATA30MINSnmpexprdata SNMPEXPRDATA30MIN Database tables and fields SNMPEXPRDATA1DAYSnmpexpression Snmpprofile Writecommunitystring Database tables and fields SnmpprofileReadcommunitystring SNMPV3FORWARDINGCREDENTIAL SnmptrapcredentialSourceobjecttype Sslcertificate Sslcertificatevipservermap SslkeyDatabase tables and fields Sslcertificate Database tables and fields Sslkey SslkeypasswordStatsaging Stpport Stpport Stpinstance Switchbottleneckconfig Database tables and fields Stpinstance Switchconfigdetail SwitchconfigSwitchlicense Field Switchport Switchmodel Database tables and fields Switchport Fcfastwriteenabled NpivenabledIslrrdyenabled Qosenabled Eportdisabled DefaultareaidLogicalportnumber Logicalportwwn Switchportperformance Database tables and fields Switchportperformance Systemcardenginemapping SwitchthresholdsettingSystemproperty Targettype Thresholdpolicy ThresholdmeasureTimeseriesdata TIMESERIESDATA1DAY TABLE\399 TIMESERIESDATA30MIN Database tables and fields TIMESERIESDATA1DAYTIMESERIESDATA2HOUR Sumvalue TIMESERIESDATA1TIMESERIESDATA11DAY TIMESERIESDATA12HOUR Database tables and fields TIMESERIESDATA11DAYTIMESERIESDATA130MIN Minvalue TIMESERIESDATA2 Database tables and fields TIMESERIESDATA130MIN TIMESERIESDATA22HOUR TIMESERIESDATA21DAY TIMESERIESDATA3 Database tables and fields TIMESERIESDATA22HOURTIMESERIESDATA230MIN TIMESERIESDATA32HOUR Database tables and fields TIMESERIESDATA3TIMESERIESDATA31DAY TIMESERIESDATA330MIN Database tables and fields TIMESERIESDATA32HOUR TIMESERIESDATA41DAY TIMESERIESDATA4 TIMESERIESDATA430MIN TIMESERIESDATA42HOUR Toolpath ToolappTrill Database tables and fields TIMESERIESDATA430MIN Trunkgroupinterface TrilltrunkgroupTrilltrunkmember Trunkgroupmember User Useraormap Database tables and fields UserUserdefineddevicedetail Userdefinednetworkscope Content UserrealtimemeasuresettingUserpreference Userrealtimemeasuremapping Userrolemap UserresourcemapUserstatemap Vportdetail Vcnpeer Vcnmember Vcemprofile VcnpeerVcsclustermember Vipserver Database tables and fields VcemprofileVipserverbinding Virtualcircuitinterface Virtualfcoeportstat VirtualfcoeportVirtualfcoeportmacmember Virtualportwwndetails Database tables and fields Virtualfcoeportstat Database tables and fields Virtualportwwndetails Virtualswitch Database tables and fields Virtualswitch Insistentdidmode FcoeloginenabledDOMAINMODE239 Domainidoffset Mapsenabledactions HifenabledCLUSTER1 Vcsid Monitored Vlan Vlaninterfacerelation VlaninterfacememberVlanintctagrelation Vlanintmacgrouprelation Vmotionevent Vllendpointrelation Vmotionpnicdetails Database tables and fields VmotioneventVmdatacenter Vmdatastoredetails Vmdvport Vmdvportgroup Database tables and fields Vmdvport Database tables and fields Vmdvportgroup Vmdvswitch Vmfchba Database tables and fields VmdvswitchVmdvswitchhostmember Vmfchbadeviceportmap VmhostDatabase tables and fields Vmfchba Vmhostenddevconnectivity VmhostproxyswitchDatabase tables and fields Vmhost Vmhostvirtualnic Database tables and fields VmhostproxyswitchVmhostproxyswitchpnicspec Vmnicteamingpolicy VmnetworksettingsDatabase tables and fields Vmhostvirtualnic Database tables and fields Vmnicteamingpolicy Vmpath Vmphysicalnic Vmsecuritypolicy Database tables and fields Vmphysicalnic Vmstdvswitchportgroup VmstandardvirtualswitchVmstandardvswitchport Vmstorage Database tables and fields Vmstdvswitchportgroup Vmtrafficshapingpolicy VmvcenterVmstoragehbaremoteportmap Vmvirtualethernetadapter Database tables and fields VmvcenterVmvcentermember Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Vmvirtualmachinedatastoremap Database tables and fields VmvirtualmachineVplsdevicerelation Vplsendpointrelation Vrconnfcconnection VrconndomainVrconndomaingroup Vrconnmoduleport Vrconnmodule Vrconnwwn WirelessproductdetailsVrconnserverprofile Zone WirelessproductrelationWtarchive Zonealiasinzone ZonealiasZonealiasmember Zonedb Zonedbcontent ZonedbconfigZonedbusers ZONEIN-ZONESET Views AdapterportconfiginfoAgconnectioninfo Views Cnaportdetailsinfo BootimagefiledetailsinfoCnaethportconfiginfo CNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS CNAETHPORT.MTU CNAPORT.ALARMWARNINGCnaportinfo CORESWITCH.ID Coreswitchdetailsinfo Coreswitch Left Outer Join Coreswitchdetails CORESWITCHDETAILS.DESCRIPTIONCryptohostluninfo Cryptolun LUN, Cryptohost Cryptotargetengineinfo CRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, CryptoswitchDashboardpreferencesinfo DASHBOARD.CREATEDBY Deploymentlog DeploymentconfigurationDeploymentinfo Deviceconnectioninfo EEMONITORSTATS30MININFO EEMONITORSTATS5MININFOEEMONITORSTATS2HOURINFO EEMONITORSTATS1DAYINFO TEPORTSTATS30MININFO TEPORTSTATS5MININFO TEPORTSTATS1DAYINFO TEPORTSTATS2HOURINFO CORESWITCH.MAXVIRTUALSWITCHES SwitchinfoCORESWITCH.IPADDRESS Deviceinfo CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, FabricVIRTUALSWITCH.CORESWITCHID = CORESWITCH.ID DEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS DEVICENODE.SIMULATEDDEVICEPORT.NUMBER DEVICEPORT.PORTID N2FPORTMAP Switchport Agnport Switchport Agfport DEVICENODE.FABRICID = SWITCHINFO.FABRICIDN2FPORTMAPINFO Devicenodeinfo Devicenode Deviceportinfo DEVICENODE.FDMIHOSTNAME DevportgigeportlinkinfoDeviceport DEVICEPORTGIGEPORTLINK.DIRECTATTACH Islinfo DevportmacaddrmapinfoIslconnectioninfo ISL.DESTPORTNUMBER Ethernetislinfo DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.IDEventdetailsinfo FABRIC.ID = ISL.FABRICID Eventinfo Fabricinfo FCIPTUNNELCIRCUIT.DSCPDATA FciptunnelcircuitinfoFABRICMEMBER.FABRICID = FABRIC.ID FCIPTUNNEL.DSCPCONTROL FciptunnelinfoFciptunnelcircuit Fruinfo Fcoedeviceinfo Gigeportecloudlinkinfo HBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATE Gigeport Switchport CoreswitchGigeportinfo Hbaportdetailsinfo HBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOS HBAPORTDETAIL.PREBOOTDISABLED Hbaport HbatargetinfoHBATARGET.DEVICEPORTID HBATARGET.TRUSTED HBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTID HealthstatusinfoHBAREMOTEPORT.CURRENTSPEED HBAREMOTEPORT.IOLATENCYAVERAGE HOSTDISCOVERYREQUEST.ID HostdiscoveryrequestinfoHOSTDISCOVERYOPTION.VMPORT DEVICEENCLOSURE.TYPE HOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID IflinfoHostdiscoveryrequest Isltrillinfo ISL.DESTDOMAINID ISL.DESTPORTNUMBER IsltrunkgroupmemberinfoDESTDEVICE.MANAGEDELEMENTID AS Destmeid ISL Device Vcsdevice Isltrunkinfo L2NEIGHBORINFO ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHIDMapseventdetailsinfo L2NEIGHBOR TEMPMODULE.MODULEID TEMPMODULE.NUMPORTS Moduleinfo MODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENT NportwwnmapinfoPHYSICALDEVICE.DEVICEID FOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUM Productinfo Phantomportinfo TEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESS TEMPDEVICE.FABRICWATCHSTATUSTEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLB Lastseentimestamp TOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS as TEMPDEVICE.FIRSTSEENTIME Portgroupinfo PortbottleneckconfinfoPortbottleneckstatinfo Portprofileinfo Roleprivilegeinfo Portprofilemacinfo PortprofileinterfaceinfoPORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODE Portprofile Sflow PortvlaninfoProtocolvlaninfo Scomeemonitorinfo SFLOWMINUTEL3VIEWSflowminutemacview SOURCEPORT.ID = EEMONITOR.SOURCEPORTID SensorinfoEemonitor Smartcardusageinfo Switchdetailsinfo SwitchconfiginfoSWITCHCONFIG, Switchconfigdetail SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGID VIRTUALSWITCH.FMSMODE CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, Coreswitchdetails VIRTUALSWITCH.MANAGEDELEMENTID Switchportinfo SwitchdiscoveredmacinfoSWITCHPORT.ID DEVICE.IPADDRESS, DEVICE.DEVICEID CORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo TIMESERIESDATA12HOUR.MEASUREID Timeseriesdataview Union ALL From timeseriesdatainfo tsd Trillinfo Virtualfcoeportinfo TrilltrunkinfoUserroleresourceinfo VIRTUALPORTWWNDETAILS.SWITCHID CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.IDVirtualportwwndetailsinfo Virtualportwwndetails Vlanintclassifierinfo VmaddressinfoDEVICE.DEVICEID VLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBID MACGROUP.ID VmconnectivityinfoDEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.ID INTERFACE.DEVICEID = DEVICE.DEVICEID DEVICEENCLOSURE.ID AS Hostdbid VMPATH.HBAPORT = DEVICEPORT.WWN Vmnetworkconnectivityinfo Pnicmac VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHIDVMHOSTENDDEVCONNECTIVITY.INTERFACEID DEVICE.MANAGEDELEMENTID VMHOST.DEVICEENCLOSUREID Switchname Vmeemonitorinfo VmdatastoredetailsinfoVmpath Vmvirtualmachine VMPATH.HBAPORTBPCHAR = SOURCEPORT.WWN Vmluninfo Vmhostinfo Vmstatisticsinfo VMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN SWITCHPORT.PORTID SWITCHPORT.PORTNUMBERSWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOK VRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINID VrconnmoduleinfoVRCONNDOMAIN.FIRMWAREVERSION VCEMPROFILE.DISCOVERYSTATUS Union Select distinct VRCONNMODULE.ID Vrconnnpivinfo Vrconnmoduleportinfo USERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS VmmdiscoveredmacinfoDEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAME Vmvirtualethernetadapterinfo Zonedbinfo ZONEDB.ID = ZONEDBCONFIG.ZONEDBIDApusage Events Physicaldeviceinfo SflowminutebgpviewSflowminutevlanview Snmpdatainfo SlotinfoManagedelementinfo Snmpdataview Snmpexprdatainfo Where sw.id = sp.virtualswitchid = de.managedelementid Device PHYSICALINTERFACE, Physicalport Vmvnetworkinfo Vcsclustermemberinfo Trilltrunkgroup Resetvcslicensed$BODY$ Select Wirelessinterface Wiredinterface L3.SUBNETMASK CeeportinfoDeviceipaddress CEEPORT.AMPPPROFILEMODE CEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Ampp Access levels definedIndex CNA EMC, 354 HP LAN, 355 IBM Hosts, 101 CUP, Ficon 1692 53-1003056-01 Gslb FiconFTP State, 102 Mstp Monitor NOS New device, adding nameColumns, 284 product overview, 453 products Rbac 1043 SVI 1699 WWN Edit, 880 1701