Layer 3 access control list policy

18

6.Click OK on the Edit Service Group dialog box.

The Service dialog box, Service Group tab displays with the new group in the List of Service Groups table.

7.Click Close on the Service dialog box.

To finish configuring the advanced settings for the ACL, refer to “Configuring L3 ACL advanced settings” on page 598.

Copying a service group

You can access the Service dialog box when configuring an extended L3 ACL device configuration. To configure an extended L3 ACL, refer to one of the following procedures:

“Creating an extended L3 ACL configuration” on page 585

“Editing an extended L3 ACL configuration” on page 587

“Copying an extended L3 ACL configuration” on page 588

“Creating an extended L3 ACL configuration” on page 585

“Editing an IPv6 L3 ACL configuration” on page 592

“Copying an IPv6 L3 ACL configuration” on page 593

To copy a service, complete the following steps.

1.Click the Service Groups tab.

2.Select the service group you want to copy and click Duplicate. The Duplicate Service Group dialog box displays.

3.Enter a name for the service group in the Name field.

4.To enter a range of ports, complete the following steps.

a.Enter the starting port number in the Start Port field.

b.Enter the ending port number in the End Port field.

c.Click the right arrow button to move the address range to the Selected table.

5.To add a service to the group, complete the following steps.

a.Select one or more services to add to the group in the Services table.

b.Click the right arrow button to move the selected services to the Selected table.

6.To add a service group to the group, complete the following steps.

a.Select one or more service groups to add to the group in the Services table.

b.Click the right arrow button to move the selected service groups to the Selected table.

7.Click OK on the Duplicate Service Group dialog box.

The Service dialog box, Service Group tab displays with the new group in the List of Service Groups table.

8.Click Close on the Service dialog box.

To finish configuring the advanced settings for the ACL, refer to “Configuring L3 ACL advanced settings” on page 598.

Brocade Network Advisor IP User Manual

619

53-1003056-01

 

Page 671
Image 671
Brocade Communications Systems IP250 user manual Copying a service group, To copy a service, complete the following steps